Powermatic Associates Logo

LC1F1504BD Schneider Electric Electronic Components

LC1F1504BD on Powermatic Associates
Schneider Electric

Part#:LC1F1504BD

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Schneider Electric LC1F1504BD is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 4-pole (4P; 4NO) configuration and supports a rated current of 250A under AC-1 conditions. This contactor is equipped with ring-lugs/bar connections for installation and operates with a control voltage (DC) range of 20.4-26.4Vdc, with a nominal value of 24Vdc (0.85...1.1 x Uc). The LC1F1504BD is capable of handling a rated operating voltage (Ue) up to 1000 V and a rated voltage (AC) for phase-to-phase connections also up to 1000 V. It has a rated impulse voltage (Uimp) of 8 kV and offers mechanical durability of up to 10,000,000 operations at no load. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts.

Product Details

  • Product Certifications
    CCC BV DNV ABS UL CB LROS (Lloyds register of shipping) RINA RMRoS UKCA
  • Standards
    EN 60947-4-1 IEC 60947-1 IEC 60947-4-1 JIS C8201-4-1 EN 60947-1
  • [Icw] Rated Short-Time Withstand Current
    1200 A 104 °F (40 °C) - 10 s 700 A 104 °F (40 °C) - 30 s 600 A 104 °F (40 °C) - 1 min 450 A 104 °F (40 °C) - 3 min 350 A 104 °F (40 °C) - 10 min
  • Connections - Terminals
    Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)fl
  • Tightening Torque
    Control circuit 10.62 lbf.in (1.2 N.m) Power circuit 159.31 lbf.in (18 N.m)
  • Associated Fuse Rating
    160 A aM <= 440 V 250 A gG <= 440 V
  • Control Circuit Voltage Limits
    Operational 0.85...1.1 Uc 131 °F (55 °C)) Drop-out 0.15...0.2 Uc 131 °F (55 °C))
  • [Ui] Rated Insulation Voltage
    1000 V IEC 60947-4-1 1500 V VDE 0110 group C
  • Operating Time
    30...40 ms closing 30...50 ms opening
  • Compatibility Code
    LC1F
  • Mechanical Durability
    10 Mcycles
  • Maximum Operating Rate
    2400 cyc/h 131 °F (55 °C)
  • Inrush Power In W
    560 W 68 °F (20 °C))
  • Heat Dissipation
    4.5 W
  • Hold-In Power Consumption In W
    4.5 W 68 °F (20 °C)
  • Power Dissipation Per Pole
    22 W AC-1
  • Mounting Support
    Plate
  • Average Impedance
    0.35 mOhm - Ith 250 A 50 Hz
  • Rated Breaking Capacity
    1200 A IEC 60947-4-1
  • [Ith] Conventional Free Air Thermal Current
    250 A 104 °F (40 °C)
  • Overvoltage Category
    III
  • [Uimp] Rated Impulse Withstand Voltage
    8 kV
  • Coil Type
    Standard
  • [Uc] Control Circuit Voltage
    24 V DC
  • [Ie] Rated Operational Current
    250 A 104 °F (40 °C)) <= 440 V AC-1
  • Power Pole Contact Composition
    4 NO
  • Poles Description
    4P
  • Utilisation Category
    AC-1
  • [Ue] Rated Operational Voltage
    <= 690 V AC 50/60 Hz
  • Device Short Name
    LC1F
  • Product Name
    TeSys F
  • Product Or Component Type
    Contactor
  • Range
    TeSys
  • Contactor Application
    Resistive load

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

LC1F1504BD Related Documents

Catalog-1631038984276.pdfProduct Datasheet-1631038984274.pdfInstruction Sheet-1631038984270.pdf

Similar products from: Schneider Electric Electronic Components

HDF36035 on Powermatic Associates

HDF36035

Schneider Electric

Square D by Schneider Electric HDF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDF sub-range, featuring a PowerPact H-Frame 150 TMD design. It is a 3-pole (3P) device with a rated current of 35A and offers thermal protection for overload and magnetic protection for short-circuit scenarios. This MCCB has a rated insulation voltage (Ui) of 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 250Vdc. It is designed for individual unit mount on plate with a Term. nut kit for fixed busbar connection on both line and load sides. The HDF36035 has a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm, featuring an IP40 degree of protection. Its operating mode is manual toggle, with over-current protection settings fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 850A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 35 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

1 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

1 in stock

Manufacturer warranty

LC1F1504BD Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LC1F1504BD with other Electronic Components products

Product Certifications

Standards

[Icw] Rated Short-Time Wi...

Connections - Terminals

Tightening Torque

Associated Fuse Rating

Control Circuit Voltage L...

[Ui] Rated Insulation Vol...

Operating Time

Compatibility Code

Selected product

LC1F1504BD
Backordered
LC1F1504BD
Schneider Electric

Schneider Electric LC1F1504BD is a high-power magnetic contactor within the F sub-range, designed fo...

Product CertificationsCCC BV DNV ABS UL CB LROS (L...

StandardsEN 60947-4-1 IEC 60947-1 IEC...

[Icw] Rated Short-Time Withstand Current1200 A 104 °F (40 °C) - 10 s...

Connections - TerminalsControl circuit screw clamp ...

Tightening TorqueControl circuit 10.62 lbf.in...

Associated Fuse Rating160 A aM <= 440 V 250 A gG <...

Control Circuit Voltage LimitsOperational 0.85...1.1 Uc 13...

[Ui] Rated Insulation Voltage1000 V IEC 60947-4-1 1500 V...

Operating Time30...40 ms closing 30...50 m...

Compatibility CodeLC1F

LC1F225L7
1 in stock
LC1F225L7
Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for...

Product Certifications-

Standards-

[Icw] Rated Short-Time Withstand Current-

Connections - Terminals-

Tightening Torque-

Associated Fuse Rating-

Control Circuit Voltage Limits-

[Ui] Rated Insulation Voltage-

Operating Time-

Compatibility Code-

LC1F400G7
1 in stock
LC1F400G7
Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for...

Product Certifications-

Standards-

[Icw] Rated Short-Time Withstand Current-

Connections - Terminals-

Tightening Torque-

Associated Fuse Rating-

Control Circuit Voltage Limits-

[Ui] Rated Insulation Voltage-

Operating Time-

Compatibility Code-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

MDI4MRQ34B2-EQ on Powermatic Associates

MDI4MRQ34B2-EQ

Novanta IMS

Novanta IMS MDI4MRQ34B2-EQ is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase AC stepper motor design. It is equipped with an external single-end 512-line optical encoder and a double (2) motor stack, Plus 2 version for expanded features. The connection is facilitated through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a 240Vac supply voltage and is designed for mounting with an 85x85mm flange. It can operate in ambient air temperatures ranging from 0 to +85°C and has a degree of protection rated at IP65. The moment of inertia is specified at 1.6kg.cm2, with a stall torque of 353N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

LC1F400G7 on Powermatic Associates

LC1F400G7

Verified stock: 1

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

Schneider Electric

LC1F400P7 on Powermatic Associates

LC1F400P7

Verified stock: 2

Schneider Electric LC1F400P7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features ring-lugs/bar connections and is equipped with 3 poles (3P; 3NO). The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. The control voltage (AC) specifications are 196-253Vac (230Vac nominal; 40-400Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V and a rated impulse voltage (Uimp) of 8 kV. It has no normally open (NO) or normally closed (NC) auxiliary contacts. The rated active power ranges from 110kW at 220-230Vac to 280kW at 660-690Vac under AC-3 conditions, with a mechanical durability of 10,000,000 operations at no load. The rated voltage (AC) phase-to-phase is 1000 V.

Schneider Electric

LC1F225L7 on Powermatic Associates

LC1F225L7

Verified stock: 1

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

Schneider Electric

LC1F265B7 on Powermatic Associates

LC1F265B7

Verified stock: 0

Schneider Electric LC1F265B7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 350A under AC-1 conditions and 265A at 440Vac under AC-3 conditions. It operates with a control voltage range of 20.4-26.4Vac (24Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of up to 1000 V. The LC1F265B7 does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and offers rated active power ranging from 75kW at 220-230Vac to 160kW at 660-690Vac under AC-3 conditions. The mechanical durability of this contactor is rated at 10 million operations at no load, with a phase-to-phase rated voltage (AC) of 1000 V.

Schneider Electric

LC1F265G7 on Powermatic Associates

LC1F265G7

Verified stock: 0

Schneider Electric LC1F265G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 350A under AC-1 conditions and 265A at 440Vac under AC-3 conditions. It operates with a control voltage range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 75kW at 220-230Vac, 132kW at 380-400Vac, 140kW at 415Vac and 440Vac, 160kW at 500Vac, and 660-690Vac, and 147kW at 1000Vac, all under AC-3 conditions. The LC1F265G7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

Schneider Electric

FAQ

Out if stock but available for backorder.

Schneider Electric LC1F1504BD is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 4-pole (4P; 4NO) configuration and supports a rated current of 250A under AC-1 conditions. This contactor is equipped with ring-lugs/bar connections for installation and operates with a control voltage (DC) range of 20.4-26.4Vdc, with a nominal value of 24Vdc (0.85...1.1 x Uc). The LC1F1504BD is capable of handling a rated operating voltage (Ue) up to 1000 V and a rated voltage (AC) for phase-to-phase connections also up to 1000 V. It has a rated impulse voltage (Uimp) of 8 kV and offers mechanical durability of up to 10,000,000 operations at no load. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts.

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock