25S4FSS Schneider Electric Electronic Components

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

LC1F400G7

Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

Manufacturer warranty

25S4FSS Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 25S4FSS with other Electronic Components products

Enclosure Material

Enclosure Mounting

Depth

Width

Height

Phase

Power Rating

Temperature Rise

Product Or Component Type

Full Capacity Taps

Selected product

Backordered

25S4FSS

Schneider Electric

TRANSFORMER DRY 1 PHASE 25 KVA 120/240V SECONDARY

Enclosure MaterialStainless Steel

Enclosure MountingWall mounted

Depth13.5 in (342.90 mm)

Width15 in (381.00 mm)

Height20 in (508.00 mm)

Phase1 phase

Power Rating25 kVA

Temperature Rise115 °C

Product Or Component TypeDry Sealed Transformer

Full Capacity Taps2 5 % FCBN

1 in stock

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) s...

Enclosure Material-

Enclosure Mounting-

Depth4.87 in (123.70 mm)

Width7.55 in (191.77 mm)

Height14.6 in (370.84 mm)

Phase3 phase

Power Rating-

Temperature Rise-

Product Or Component Type-

Full Capacity Taps-

1 in stock

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads,...

Enclosure Material-

Enclosure Mounting-

Depth2.87 in (73 mm)

Width0.71 in (18 mm)

Height3.19 in (81 mm)

Phase-

Power Rating-

Temperature Rise-

Product Or Component TypeMiniature circuit-breaker

Full Capacity Taps-

About the manufacturer

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Relevant products

XB5AW34B5

Schneider Electric XB5AW34B5 is an illuminated flush push-button designed for automation control systems. This component, part of the XB5 sub-range, features a plastic body and bezel with a round shape and a plain lens type. It offers a degree of protection rated at IP66, making it suitable for use in environments where dust and water resistance are necessary. The push-button operates with a spring-return mechanism, providing momentary (impulse) activation. It includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts for integration into various circuit designs. The XB5AW34B5 is equipped with an integral LED for illumination, with the light color being red. It operates on a supply voltage of 24 V, accommodating both AC and DC sources, and is compatible with network frequencies of 50/60 Hz. The diameter of the push-button is 22 mm, and it utilizes screw-clamp terminals for secure wire connections.

Schneider Electric

CAD32G7

Schneider Electric CAD32G7 is a control relay designed with a mechanical durability of 30,000,000 operations at no load. It features a mounting mode that accommodates both plate and DIN rail installations. The utilisation categories for this part are AC-14, AC-15, and DC-13, indicating its suitability for various control circuit applications. It is equipped with three SPST-NO (Single Pole Single Throw - Normally Open) contacts, ensuring straightforward connectivity for control signals. The type of terminals provided are screw clamp, facilitating secure and reliable wire connections. With an operating rate of 10,800 cycles per hour, this part is designed to meet the demands of high-frequency operation environments.

Schneider Electric

HGL36020

Square D by Schneider Electric HGL36020 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGL sub-range. It features a PowerPact H-Frame 150 TMD design with 3 poles (3P) and a rated current of 20A. This breaker is designed for 600Vac/500Vdc with a thermal protection for overload and magnetic protection for short-circuit, ensuring operation within its rated insulation voltage of 750 V and a rated voltage of 600Vac 600Y/347Vac. It supports a mounting mode of individual unit mount on plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. The connection type includes lugs on both load and line sides, and it operates with a toggle (manual) mechanism. The degree of protection is IP40. Protection settings are over-current fixed at 20A, short-circuit hold current fixed at 350A, and short-circuit trip current fixed at 750A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 20 AT, with a frame current rating of 150 AF. It has a short circuit breaking rating of 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc and 500Vdc, all according to UL489. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

25S40FSS

Verified stock: 0

TRANSFORMER DRY 1PH 25KVA 480V-120/240V

Schneider Electric

25S40F

Verified stock: 0

Schneider Electric - 25S40F

Schneider Electric

25S4F

Verified stock: 0

TRANSFORMER DRY 1PH 25KVA 600V-120/240V

Schneider Electric

XB5AW34B5

Schneider Electric

S29370

Verified stock: 8

Square D by Schneider Electric S29370 is a locking device designed for OFF-position locking. It features a removable padlocking device, allowing for secure locking when the mechanism is in the OFF position.

Schneider Electric

CAD32G7

Schneider Electric

HGL36020

Schneider Electric

XB5AW34B5

Schneider Electric

CAD32G7

Schneider Electric

HGL36020

Schneider Electric

FAQ

Out if stock but available for backorder.

TRANSFORMER DRY 1 PHASE 25 KVA 120/240V SECONDARY

Similar products from: Electronic Components

This item can ship within 24h!

T18SP6R

Verified stock: 4

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

Banner

This item can ship within 24h!

PLF1M-C

Verified stock: 68

Pan-Ty® Cable Tie

Panduit

This item can ship within 24h!

HE1G-21SM

Verified stock: 71

Enabling Grip Switch, Three position functionality (OFF - ON - OFF) as required for manual robotic control, Positive action contacts On (position 2) to Off (position 3) ensure no contact welding (per EN 60947-5-1 / IEC60947-5-1), Contacts will not close

Idec

This item can ship within 24h!

T18SP6R

Verified stock: 4

Banner

This item can ship within 24h!

7113000

Verified stock: 1

DK Earth rail, horizontal, L: 450 mm, For W: 600/800 mm

Rittal

This item can ship within 24h!

T18SP6R

Verified stock: 4

Banner

What can I help you find today?

Recommended parts

ZB5AK1243

Schneider Electric

Schneider Electric ZB5AK1243 is a round, illuminated head designed for integral LED use with a standard handle, part of the XB5 sub-range. It features a plastic body and bezel, with a diameter of 22 mm and dimensions of 29 mm in height and width, and 43 mm in depth. This part offers a red light color and operates in a 2-position stay-put mode with angular positions at 0 and 90 degrees. It boasts a mechanical durability of 1,000,000 operations at no load and is equipped with a degree of protection rated at IP69K, NEMA 4X, and NEMA 13, ensuring its capability to withstand demanding environmental conditions.

E3X-DA11-S

Omron

OBSOLETE

FP0-TC4

Panasonic

FP0 Thermocouple Unit, 4 IN, J, K, T and

4 in stock

ZBVB5

Schneider Electric

Schneider Electric ZBVB5 is a light unit designed as a light block with an integral LED. It features a degree of protection rated at IP20 and operates on a network frequency of 50/60 Hz. This unit is compatible with a supply voltage of 24 V, available in both AC and DC formats. The light emitted by the ZBVB5 is orange, and it is equipped with screw-clamp type terminals for secure connections.

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

QS18VP6FF100Q8

Banner

WORLD-BEAM QS18 Series: Fixed-Field; Range: 100 mm cutoff; Output: Complementary Solid-State PNP; M12 Integral QD

8 in stock

ZB5AK1243

Schneider Electric

ZBVB5

Schneider Electric

PAXT0010

Red Lion

ZB5AK1243

Schneider Electric