8134897 Festo Pressure Sensors

Product Details

• Electrical connection 1, connection technology
  Connection diagram L1J
• Electrical connection 1, connection type
  Plug
• Certificate issuing authority
  UL E322346
• Information on operating and pilot media
  Operation with oil lubrication possible
• Ambient temperature
  0 °C ... 50 °C
• Temperature co-efficient in ± %FS/K
  0.05 %FS/K
• Short-circuit protection
  yes
• Protocol
  IO-Link®
• IO-Link®, process data width IN
  2 Byte
• Type of mounting
  Front panel mounting With wall/surface bracket
• Housing material
  PA-reinforced
• Protection against tampering
  IO-Link® PIN code
• Type code
  SPAN
• KC characters
  KC EMC
• Pressure measuring range initial value
  0 bar
• Symbol
  00995685
• Measured variable
  Relative pressure
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, SIO mode support
  Yes
• IO-Link®, minimum cycle time
  3 ms
Mounting position
Any
Display type
Illuminated LCD
Setting range threshold value
0 % ... 100 %
Electrical connection for input 1, connection pattern
00995428
Pressure measuring range end value
10 bar
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Method of measurement
Piezoresistive pressure sensor
Accuracy in ± % FS
1.5 %FS
Switching function
Window comparator Auto difference monitoring
Min. load resistance of voltage output
20 kOhm
Analog output
0 - 10 V 1 - 5 V
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, data memory required
500 byte
Pneumatic connection
Internal thread G1/8
Displayable unit(s)
MPa psi
Degree of protection
IP40
Electrical connection 1, number of pins/wires
4
Overload pressure
217.5 psi
Note on materials
RoHS-compliant
Max. overload pressure
15 bar
Temperature of medium
0 °C ... 50 °C
Switching element function
N/C contact/N/O contact switchable
IO-Link®, profile
Smart sensor profile
IO-Link®, port class
A
DC operating voltage range
15 V ... 30 V
Materials in contact with the media
FPM PA-reinforced
Setting options
IO-Link® Via display and pushbuttons
Certification
RCM compliance mark c UL us - Listed (OL)
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Repetition accuracy in ± %FS
0.3 %FS
Switching output
2 x PNP or 2 x NPN switchable
Max. load resistance of current output
500 Ohm
Max. output current
100 mA
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data width OUT
0 Byte
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
Reverse polarity protection
for all electrical connections
Product weight
34 g
Setting range hysteresis
0 % ... 90 %
Corrosion resistance class (CRC)
2 - Moderate corrosion stress

8134897 Related Documents