8134895 Festo Pressure Sensors

Product Details

• KC characters
  KC EMC
• Symbol
  00995685
• Method of measurement
  Piezoresistive pressure sensor
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
• Temperature co-efficient in ± %FS/K
  0.05 %FS/K
• Electrical connection for input 1, connection pattern
  00995428
• Electrical connection 1, number of pins/wires
  4
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Max. overload pressure
  15 bar
• Repetition accuracy in ± %FS
  0.3 %FS
• Short-circuit protection
  yes
• IO-Link®, SIO mode support
  Yes
• IO-Link®, process data width OUT
  0 Byte
• Mounting position
  Any
• Type code
  SPAN
• Electrical connection 1, connection type
  Plug
• Pressure measuring range end value
  10 bar
• Measured variable
  Relative pressure
• Ambient temperature
  0 °C ... 50 °C
• Accuracy in ± % FS
  1.5 %FS
Max. output current
100 mA
Min. load resistance of voltage output
20 kOhm
Protocol
IO-Link®
IO-Link®, communication mode
COM2 (38,4 kBd)
DC operating voltage range
15 V ... 30 V
Electrical connection 1, connection technology
Connection diagram L1J
Certification
RCM compliance mark c UL us - Listed (OL)
Certificate issuing authority
UL E322346
Temperature of medium
0 °C ... 50 °C
Switching function
Window comparator Auto difference monitoring
Max. load resistance of current output
500 Ohm
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data width IN
2 Byte
Reverse polarity protection
for all electrical connections
Display type
Illuminated LCD
Protection against tampering
IO-Link® PIN code
Pressure measuring range initial value
-1 bar
Overload pressure
217.5 psi
Note on materials
RoHS-compliant
Information on operating and pilot media
Operation with oil lubrication possible
Switching output
2 x PNP or 2 x NPN switchable
Analog output
0 - 10 V 1 - 5 V
IO-Link®, protocol version
Device V 1.1
IO-Link®, port class
A
IO-Link®, minimum cycle time
3 ms
Housing material
PA-reinforced
Materials in contact with the media
FPM PA-reinforced
Setting range hysteresis
0 % ... 90 %
Switching element function
N/C contact/N/O contact switchable
IO-Link®, profile
Smart sensor profile
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
IO-Link®, data memory required
500 byte
Type of mounting
Front panel mounting With wall/surface bracket
Setting range threshold value
0 % ... 100 %
Pneumatic connection
For pneumatic tubing outside diameter 4 mm
Displayable unit(s)
MPa psi
Degree of protection
IP40
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Product weight
25 g
Setting options
IO-Link® Via display and pushbuttons

8134895 Related Documents