8083721 Festo Electric Actuators

Product Details

• Additional functions
  User interface Integrated end-position sensing
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Logic input specification
  Based on IEC 61131-2, type 1
• Ready status indication
  LED
• Logic interface, connection pattern
  00992264
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Characteristics of logic input
  Configurable Not galvanically isolated
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• IO-Link®, SIO mode support
  Yes
• Screw diameter
  12 mm
• Motor type
  Stepper motor
• Spindle type
  Ball screw drive
• Ambient temperature
  0 °C ... 50 °C
• KC characters
  KC EMC
• Insulation protection class
  B
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Input switching logic
  PNP (positive switching)
• Logic interface, connection type
  Plug
Number of digital logic inputs
2
Power supply, number of pins/wires
4
Rotor position sensor resolution
16 bit
Nominal current
5.3 A
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Stroke reserve
0 mm
Guide
Recirculating ball bearing guide
Homing
Fixed stop block positive Reference switch
Duty cycle
100%
Certification
RCM compliance mark
Max. torque Mx
20 Nm
Guide value for payload, horizontal
10 kg
Statistical fixed bearing load rating
7000 N
Basic weight with 0 mm stroke
2735 g
Guide rail material
Roller bearing steel
Spindle nut material
Roller bearing steel
Switching logic at outputs
PNP (positive switching)
Relative air humidity
0 - 90 %
Parameterization interface
IO-Link® User interface
Display
LED
Permissible voltage fluctuations
+/- 15 %
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Logic interface, number of poles/wires
8
Storage temperature
-20 °C ... 60 °C
Work range of logic input
24 V
IO-Link®, process data width IN
2 Byte
IO-Link®, minimum cycle time
1 ms
IO-Link®, data memory required
500 byte
Spindle pitch
12 mm/U
Type code
EGSS
Symbol
00997294
Repetition accuracy
±0.015 mm
Degree of protection
IP40
Linear guide dynamic basic load rating
13400 N
Max. torque My
30 Nm
Guide value for payload, vertical
10 kg
Maintenance interval
Life-time lubrication
Product weight
4635 g
Slide carriage material
Roller bearing steel
Slide material
Wrought aluminum alloy, anodized
Rotor position sensor
Absolute encoder, single-turn
Rotor position sensor measuring principle
Magnetic
Power supply, type of connection
Plug
Number of digital logic outputs 24 V DC
2
Max. current of digital logic outputs
100 mA
IO-Link®, number of ports
1
IO-Link®, port class
A
IO-Link®, process data width OUT
2 Byte
Size
60
Design
Electrical mini-slide With integrated drive
Position sensing
Motor encoder For proximity sensor
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Fixed bearing dynamic basic load rating
13321 N
Max. force Fy
4937 N
Linear guide statistical basic load rating
26900 N
Reference value, running performance
5000 km
Additional weight per 10 mm stroke
95 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Piston rod material
High-alloy stainless steel
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, connection pattern
00995989
DC nominal voltage
24 V
Max. current consumption
5300 mA
IO-Link®, Connection technology
Plug
IO-Link®, service data contents IN
32 bit force 32 bit speed
Protection class
III
Working stroke
200 mm
Reversing backlash
150 µm
Mounting position
Any
Max. speed
0.24 m/s
Max. acceleration
5 m/s²
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. force Fz
4937 N
Max. radial force on actuator shaft
420 N
Ball screw drive statistical basic load rating
8500 N
Feed constant
12 mm/U
Additional moving mass per 10 mm stroke
40 g
Housing material
Wrought aluminum alloy, anodized
Spindle material
Roller bearing steel
Dynamic basic load rating, ball screw drive
4600 N
Max. torque Mz
30 Nm
Max. feed force Fx
250 N
Moving mass at 0 mm stroke
675 g
Type of mounting
With internal thread With cylindrical pin
Material of yoke plate
Wrought aluminum alloy, anodized

Related documents 8083721 Specs