8083577 Festo Electric Actuators


Part#:8083577
Alt. Part#:ELGS-TB-KF-60-1500-ST-M-H1-PLK-AA
Manufacturer:Festo
Category:Electric Actuators
Product Lifecycle:Active
Product description
toothed belt axis unit ELGS-TB-KF-60-1500-ST-M-H1-PLK-AA Effective diameter of drive pinion: 24,83 mm, Working stroke: 1500 mm, Size: 60, Stroke reserve: 0 mm, Toothed-belt stretch: 0,124 %
Product Details
- Drive pinion effective diameter 24.83 mm
- Insulation protection class B
- Homing Fixed stop block positive Fixed stop block, negative
- Rotor position sensor measuring principle Magnetic
- Ready status indication LED
- Logic interface, connection type Plug
- Characteristics of logic input Configurable Not galvanically isolated
- Logic input specification Based on IEC 61131-2, type 1
- Permissible voltage fluctuations +/- 15 %
- Relative air humidity 0 - 90 %
- Position sensing Motor encoder For proximity sensor
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Power supply, type of connection Plug
- Logic interface, number of poles/wires 8
- DC nominal voltage 24 V
- IO-Link®, minimum cycle time 1 ms
- IO-Link®, communication mode COM3 (230.4 kBd)
- IO-Link®, protocol version Device V 1.1
- Working stroke 1500 mm
- Type code ELGS
- Design Electromechanical linear axis With integrated drive
- Repetition accuracy ±0.1 mm
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Max. force Fz 1800 N
- Max. torque Mz 31.8 Nm
- Moving mass 482 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Cover strip material Stainless steel strip
- Rotor position sensor Absolute encoder, single-turn
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Display LED
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Work range of logic input 24 V
- Max. current consumption 5300 mA
- Nominal current 5.3 A
- IO-Link®, process data width OUT 2 Byte
- IO-Link®, data memory required 500 byte
- Size 60
- Guide Recirculating ball bearing guide
- Feed constant 78 mm/U
- Product weight 9405 g
- Drive cover material Die cast aluminum, painted
- Toothed belt material Polychloroprene with glass fiber
- KC characters KC EMC
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Input switching logic PNP (positive switching)
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Number of digital logic inputs 2
- Guide value for payload, horizontal 4 kg
- Rotor position sensor resolution 16 bit
- IO-Link®, SIO mode support Yes
- Protection class III
- IO-Link®, Connection technology Plug
- Toothed belt pitch 3 mm
- Motor type Stepper motor
- Temperature monitoring Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
- Max. speed 1.3 m/s
- Duty cycle 100%
- Certification RCM compliance mark
- Max. torque Mx 29.1 Nm
- Max. feed force Fx 65 N
- Profile material Wrought aluminum alloy, anodized
- Guide rail material Tempered steel
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Parameterization interface IO-Link® User interface
- Switching logic at outputs PNP (positive switching)
- Power supply, connection pattern 00995989
- Logic interface, connection pattern 00992264
- Power supply, number of pins/wires 4
- IO-Link®, process data width IN 2 Byte
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, number of ports 1
- Toothed belt elongation 0.124 %
- Symbol 00997293
- Max. acceleration 6 m/s²
- Degree of protection IP40
- 2nd moment of area Iy 441000 mm⁴
- 2nd moment of area Iz 542000 mm⁴
- Max. torque My 31.8 Nm
- Slide weight 139 g
- Slide carriage material Tempered steel
- Belt pulley material High-alloy stainless steel
- Number of digital logic outputs 24 V DC 2
- Max. current of digital logic outputs 100 mA
- Storage temperature -20 °C ... 60 °C
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- IO-Link®, port class A
- Stroke reserve 0 mm
- Mounting position Horizontal
- Additional functions User interface Integrated end-position sensing
- Ambient temperature 0 °C ... 50 °C
- Max. force Fy 600 N
- Torsion moment of inertia It 29800 mm⁴
- Moving mass at 0 mm stroke 482 g
- Material of end caps Die cast aluminum, painted
- Slide material Die-cast aluminum
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
8083577 Related Documents
Similar products from: Festo Electric Actuators
Manufacturer warranty
8083577 Festo
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 8083577 with other Electric Actuators products
Drive pinion effective di...
Insulation protection cla...
Homing
Rotor position sensor mea...
Ready status indication
Logic interface, connecti...
Characteristics of logic ...
Logic input specification
Permissible voltage fluct...
Relative air humidity
Selected product

8083577
Festo
toothed belt axis unit ELGS-TB-KF-60-1500-ST-M-H1-PLK-AA Effective diameter of drive pinion: 24,83 m...
Drive pinion effective diameter24.83 mm
Insulation protection classB
HomingFixed stop block positive Fi...
Rotor position sensor measuring principleMagnetic
Ready status indicationLED
Logic interface, connection typePlug
Characteristics of logic inputConfigurable Not galvanicall...
Logic input specificationBased on IEC 61131-2, type 1
Permissible voltage fluctuations+/- 15 %
Relative air humidity0 - 90 %
About the manufacturer
Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...
Recently viewed products
Relevant products
FAQ
Out if stock but available for backorder.
toothed belt axis unit ELGS-TB-KF-60-1500-ST-M-H1-PLK-AA Effective diameter of drive pinion: 24,83 mm, Working stroke: 1500 mm, Size: 60, Stroke reserve: 0 mm, Toothed-belt stretch: 0,124 %
Similar products from: Electric Actuators
What can I help you find today?