8083424 Festo Electric Actuators

8083424 on Powermatic Associates
Festo

Part#:8083424

Alt. Part#:ELGS-BS-KF-32-100-8P-ST-M-H1-PLK-AA

Manufacturer:Festo

Category:Electric Actuators

Product Lifecycle:Active

Product description

spindle axis unit ELGS-BS-KF-32-100-8P-ST-M-H1-PLK-AA Working stroke: 100 mm, Size: 32, Stroke reserve: 0 mm, Spindle diameter: 8 mm, Spindle pitch: 8 mm/U

Product Details

  • Insulation protection class
    B
  • Permissible voltage fluctuations
    +/- 15 %
  • Rotor position sensor
    Absolute encoder, single-turn
  • Ready status indication
    LED
  • Logic interface, connection type
    Plug
  • Power supply, connection pattern
    00995989
  • Number of digital logic outputs 24 V DC
    2
  • DC nominal voltage
    24 V
  • IO-Link®, process data width IN
    2 Byte
  • IO-Link®, process data content OUT
    1 bit (move in) 1 bit (quit error)
  • Protection class
    III
  • Working stroke
    100 mm
  • Size
    32
  • Shock resistance
    Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
  • Relative air humidity
    0 - 90 %
  • Vibration resistance
    Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
  • Logic interface, connection technology
    M12x1, A-coded as per EN 61076-2-101
  • Power supply, type of connection
    Plug
  • Power supply, number of pins/wires
    4
  • Max. current consumption
    3000 mA
  • IO-Link®, process data content IN
    1 bit (state device) 1 bit (state out)
  • IO-Link®, number of ports
    1
  • IO-Link®, data memory required
    500 byte
  • Spindle pitch
    8 mm/U
  • Mounting position
    Any
  • Max. acceleration
    5 m/s²
  • Fz with theoretical service life of 100 km (from a guide perspective only)
    1104 N
  • Max. torque Mx
    1.3 Nm
  • Product weight
    1069 g
  • Feed constant
    8 mm/U
  • Cover strip material
    High-alloy stainless steel
  • Slide material
    Die-cast aluminum
  • Spindle material
    Steel
  • Max. cable length
    15 m outputs 20 m for IO-Link® operation
  • Note on ambient temperature
    Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
  • Rotor position sensor measuring principle
    Magnetic
  • Characteristics of logic input
    Configurable Not galvanically isolated
  • Power supply, connection technology
    M12x1, T-coded as per EN 61076-2-111
  • Max. current of digital logic outputs
    100 mA
  • Logic interface, number of poles/wires
    8
  • IO-Link®, minimum cycle time
    1 ms
  • IO-Link®, service data contents IN
    32 bit force 32 bit speed
  • IO-Link®, protocol version
    Device V 1.1
  • Type code
    ELGS
  • Motor type
    Stepper motor
  • Additional functions
    User interface Integrated end-position sensing
  • Degree of protection
    IP40
  • Fy with theoretical service life of 100 km (from a guide perspective only)
    552 N
  • Mx with theoretical service life of 100 km (from a guide perspective only)
    5 Nm
  • Mz with theoretical service life of 100 km (from a guide perspective only)
    4 Nm
  • Material of end caps
    Die cast aluminum, painted
  • Drive cover material
    Die cast aluminum, painted
  • KC characters
    KC EMC
  • Parameterization interface
    IO-Link® User interface
  • Input switching logic
    PNP (positive switching)
  • Position sensing
    Motor encoder For proximity sensor
  • Characteristics of digital logic outputs
    Configurable Not galvanically isolated
  • Number of digital logic inputs
    2
  • Guide value for payload, horizontal
    2 kg
  • Storage temperature
    -20 °C ... 60 °C
  • Rotor position sensor resolution
    16 bit
  • IO-Link®, communication mode
    COM3 (230.4 kBd)
  • IO-Link®, Connection technology
    Plug
  • Screw diameter
    8 mm
  • Design
    Electromechanical linear axis With integrated drive
  • Temperature monitoring
    Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
  • Duty cycle
    100%
  • Ambient temperature
    0 °C ... 50 °C
  • 2nd moment of area Iy
    38000 mm⁴
  • Max. torque My
    1.1 Nm
  • Max. feed force Fx
    40 N
  • Static deflection (load at standstill)
    0.1 % of axis length
  • Note on materials
    Contains paint-wetting impairment substances RoHS-compliant
  • Spindle nut material
    Steel
  • Logic input specification
    Based on IEC 61131-2, type 1
  • Homing
    Fixed stop block positive Fixed stop block, negative
  • Display
    LED
  • Switching logic at outputs
    PNP (positive switching)
  • Logic interface, connection pattern
    00992264
  • Guide value for payload, vertical
    2 kg
  • Work range of logic input
    24 V
  • Nominal current
    3 A
  • IO-Link®, SIO mode support
    Yes
  • IO-Link®, process data width OUT
    2 Byte
  • IO-Link®, port class
    A
  • Stroke reserve
    0 mm
  • Guide
    Recirculating ball bearing guide
  • Spindle type
    Ball screw drive
  • Max. speed
    0.18 m/s
  • Repetition accuracy
    ±0.015 mm
  • 2nd moment of area Iz
    45000 mm⁴
  • Max. force Fy
    150 N
  • My with theoretical service life of 100 km (from a guide perspective only)
    4 Nm
  • Dynamic deflection (load moved)
    0.05% of axis length, maximum 0.5 mm
  • Profile material
    Wrought aluminum alloy, anodized
  • Slide carriage material
    Steel
  • Symbol
    00997292
  • CE marking (see declaration of conformity)
    As per EU EMC directive As per EU RoHS directive
  • Certification
    RCM compliance mark
  • Max. force Fz
    300 N
  • Max. torque Mz
    1.1 Nm
  • Torsion moment of inertia It
    1700 mm⁴
  • Moving mass
    83.4 g
  • Guide rail material
    Steel

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.



8083424 Related Documents

Manufacturer warranty

8083424 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery


Secure Payment Processing


Warranty


Responsive Customer Support

Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 8083424 with other Electric Actuators products

Insulation protection cla...

Permissible voltage fluct...

Rotor position sensor

Ready status indication

Logic interface, connecti...

Power supply, connection ...

Number of digital logic o...

DC nominal voltage

IO-Link®, process data wi...

IO-Link®, process data co...

Selected product

8083424
Backordered
8083424
Festo

spindle axis unit ELGS-BS-KF-32-100-8P-ST-M-H1-PLK-AA Working stroke: 100 mm, Size: 32, Stroke reser...

Insulation protection classB

Permissible voltage fluctuations+/- 15 %

Rotor position sensorAbsolute encoder, single-tur...

Ready status indicationLED

Logic interface, connection typePlug

Power supply, connection pattern00995989

Number of digital logic outputs 24 V DC2

DC nominal voltage24 V

IO-Link®, process data width IN2 Byte

IO-Link®, process data content OUT1 bit (move in) 1 bit (quit ...

574093
7 in stock
574093
Festo

electric cylinder ESBF-BS-63-100-5P With ball screw, electrically actuated spindle that converts the...

Insulation protection class-

Permissible voltage fluctuations-

Rotor position sensor-

Ready status indication-

Logic interface, connection type-

Power supply, connection pattern-

Number of digital logic outputs 24 V DC-

DC nominal voltage-

IO-Link®, process data width IN-

IO-Link®, process data content OUT-

2215385
1 in stock
2215385
Festo

electric cylinder ESBF-BS-40-200-5P With ball screw, electrically actuated spindle that converts the...

Insulation protection class-

Permissible voltage fluctuations-

Rotor position sensor-

Ready status indication-

Logic interface, connection type-

Power supply, connection pattern-

Number of digital logic outputs 24 V DC-

DC nominal voltage-

IO-Link®, process data width IN-

IO-Link®, process data content OUT-

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

Recently viewed products

Relevant products

FAQ

Out if stock but available for backorder.

spindle axis unit ELGS-BS-KF-32-100-8P-ST-M-H1-PLK-AA Working stroke: 100 mm, Size: 32, Stroke reserve: 0 mm, Spindle diameter: 8 mm, Spindle pitch: 8 mm/U

What can I help you find today?

Recommended parts