8083672 Festo Electric Actuators

Product Details

• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Parameterization interface
  IO-Link® User interface
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Drive pinion effective diameter
  19.1 mm
• Permissible voltage fluctuations
  +/- 15 %
• Input switching logic
  PNP (positive switching)
• Display
  LED
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Homing
  Fixed stop block positive Fixed stop block, negative
• Switching logic at outputs
  PNP (positive switching)
• Characteristics of logic input
  Configurable Not galvanically isolated
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Max. current of digital logic outputs
  100 mA
• Logic input specification
  Based on IEC 61131-2, type 1
• Relative air humidity
  0 - 90 %
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• KC characters
  KC EMC
• Insulation protection class
  B
• Rotor position sensor
  Absolute encoder, single-turn
• Rotor position sensor measuring principle
  Magnetic
Position sensing
Motor encoder For proximity sensor
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Power supply, number of pins/wires
4
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Logic interface, connection pattern
00992264
Number of digital logic inputs
2
Work range of logic input
24 V
Max. current consumption
5300 mA
IO-Link®, communication mode
COM3 (230.4 kBd)
Protection class
III
IO-Link®, port class
A
Size
45
Symbol
00997293
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
2nd moment of area Iy
140000 mm⁴
Max. torque Mz
4.7 Nm
Ready status indication
LED
Power supply, connection pattern
00995989
Number of digital logic outputs 24 V DC
2
Guide value for payload, horizontal
2.5 kg
DC nominal voltage
24 V
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, process data width OUT
2 Byte
Logic interface, connection type
Plug
Power supply, type of connection
Plug
Storage temperature
-20 °C ... 60 °C
Rotor position sensor resolution
16 bit
IO-Link®, SIO mode support
Yes
Logic interface, number of poles/wires
8
IO-Link®, minimum cycle time
1 ms
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, number of ports
1
Toothed belt elongation
0.187 %
Guide
Recirculating ball bearing guide
Nominal current
5.3 A
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Working stroke
1500 mm
Stroke reserve
0 mm
Mounting position
Horizontal
Motor type
Stepper motor
Duty cycle
100%
Degree of protection
IP40
2nd moment of area Iz
170000 mm⁴
Max. torque Mx
5.5 Nm
Torsion moment of inertia It
8500 mm⁴
Profile material
Wrought aluminum alloy, anodized
Guide rail material
Tempered steel
IO-Link®, protocol version
Device V 1.1
IO-Link®, data memory required
500 byte
Type code
ELGS
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Repetition accuracy
±0.1 mm
IO-Link®, Connection technology
Plug
Toothed belt pitch
2 mm
Design
Electromechanical linear axis With integrated drive
Max. acceleration
6 m/s²
Ambient temperature
0 °C ... 50 °C
Max. force Fy
300 N
Moving mass
169 g
Additional functions
User interface Integrated end-position sensing
Max. speed
1.2 m/s
Max. feed force Fx
75 N
Product weight
5240 g
Slide material
Die-cast aluminum
Certification
RCM compliance mark
Max. force Fz
600 N
Max. torque My
4.7 Nm
Moving mass at 0 mm stroke
169 g
Slide weight
55 g
Cover strip material
Stainless steel strip
Slide carriage material
Tempered steel
Feed constant
60 mm/U
Material of end caps
Die cast aluminum, painted
Drive cover material
Die cast aluminum, painted
Toothed belt material
Polychloroprene with glass fiber
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Belt pulley material
High-alloy stainless steel

8083672 Related Documents