561690 Festo Pneumatic Actuators

Product Details

• Adjustment range of swivel angle
  0 deg ... 270 deg
• Type code
  DSMI
• Position sensing
  For proximity sensor With integrated angle measurement system
• Min. travel speed
  50 deg/s
• Max. short-time slider current
  10000 µA
• Operating medium
  Compressed air as per ISO 8573-1:2010 [6:4:4]
• Continuous shock resistance to DIN/IEC 68 Part 2-82
  Tested as per severity level 2
• Vibration resistance to DIN/IEC 68 Part 2-6
  Tested as per severity level 2
• Max. axial force
  50 N
• Piston diameter
  25 mm
• Measuring principle of linear potentiometer
  Analog
• Typical positioning time, long stroke, horizontal
  0.35/0.60 s
• Typical positioning time, short-stroke, horizontal
  0.15/0.25 s
• Nominal operating voltage DC
  10 V
• CE marking (see declaration of conformity)
  As per EU EMC directive
• Impact energy in the end positions
  0.05 J
• Max. radial force
  120 N
• Min. mass moment of inertia, vertical
  0.0015 kgm²
• Output signal
  Analog
• Soft Stop end position repetition accuracy
  < 0.2 deg
Pneumatic connection
M5
Note on materials
Free of copper and PTFE
Vane material
PET-reinforced
Stroke reduction in the end positions
5 °
Cushioning
Elastic cushioning rings/pads at both ends
Design
Drive shaft on ball bearings Rotary vane
Max. swivel frequency at 6 bar
2 Hz
Recommended contact current
< 1 µA
Connection resistance tolerance
20 %
Stop lever material
Wrought aluminum alloy Anodized
Feather key material
Steel
Swivel angle
0 deg ... 272 deg
Mounting position, positioning
Any
Max. travel speed
2000 deg/s
Mode of operation
Double-acting
Permissible voltage fluctuations
< 1 %
Information on operating and pilot media
Operation with oil lubrication not possible
Degree of protection
IP65 as per IEC 60529
Max. mass moment of inertia, horizontal
0.03 kgm²
Theoretical torque at 6 bar
5 Nm
Angular resolution
≤ 0.1 deg
Cable length
30 m
(Fixed) stop material
Steel
Material of cylinder barrel
Wrought aluminum alloy
Shortest positioning stroke
5° when positioning 15° for Soft Stop
Mounting position, Soft Stop
Horizontal
Operating pressure for positioning/soft stop
4 bar ... 8 bar
Connection resistance
5 kOhm
Max. operating voltage DC
42 V
Max. current consumption
4 mA
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-10 °C ... 60 °C
Max. mass moment of inertia, vertical
0.03 kgm²
Min. mass moment of inertia, horizontal
0.0015 kgm²
Repetition accuracy, Soft Stop intermediate position
+/- 2 deg
Independent linearity
0.0025
Type of mounting
With internal thread
Measuring system coupling material
TPE-U(PU)
Housing material
Wrought aluminum alloy Anodized
Product weight
1080 g
Positioning repetition accuracy
+/- 0.3 deg
Linear potentiometer electrical connection
4-pin
Material of measuring system housing
Wrought aluminum alloy Anodized
Drive shaft material
Steel Nickel-plated
Material of plug housing
PA-reinforced

Related documents 561690 Specs