Powermatic Associates Logo

557236 Festo Pneumatic Actuators

557236 on Powermatic Associates
Festo

Part#:557236

Alt. Part#:ADNGF-11/4"-11/4"-P-A

Manufacturer:Festo

Category:Pneumatic Actuators

Product Lifecycle:Active

Product description

compact cylinder ADNGF-11/4"-11/4"-P-A According to ISO 21287, with plain-bearing guide, piston rod secured against rotation by means of guide rods and yoke plate. Stroke: 1,25 ", Piston diameter: 1 1/4", Based on the standard: ISO 21287, Cushioning: P: F

Product Details

  • Stroke
    31.75 mm
  • Operating pressure
    0.1 MPa ... 1 MPa
  • Information on operating and pilot media
    Operation with oil lubrication possible (required for further use)
  • Theoretical force at 6 bar, advancing
    483.001 N
  • Pneumatic connection
    1/8 NPT
  • Material of cylinder barrel
    Wrought aluminum alloy Smooth anodized
  • Impact energy in the end positions
    0.39997 J
  • Basic weight with 0 mm stroke
    328.18 g
  • Type of mounting
    Optionally: With accessories
  • Piston rod material
    High-alloy steel
  • Based on norm
    ISO 21287
  • Design
    Piston Profile barrel
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Ambient temperature
    -20 °C ... 80 °C
  • Theoretical force at 6 bar, retracting
    415.001 N
  • Moving mass at 0 mm stroke
    122.444 g
  • Flange screws material
    Steel
  • Material of dynamic seals
    TPE-U(PU)
  • Type code
    ADNGF
  • Mounting position
    Any
  • Position sensing
    For proximity sensor
  • Mode of operation
    Double-acting
  • Additional moving mass per 10 mm stroke
    38.131 g
  • Cover material
    Wrought aluminum alloy Anodized
  • Piston diameter
    1 1/4"
  • Cushioning
    Elastic cushioning rings/pads at both ends
  • Protection against torsion/guide
    Guide rod with yoke
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Additional weight per 10 mm stroke
    17.067 g
  • Seals material
    NBR

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

557236 Related Documents

557236 DataSheet.pdf

Similar products from: Festo Pneumatic Actuators

536287 on Powermatic Associates

536287

Festo

compact cylinder ADN-32-80-I-P-A Per ISO 21287, with position sensing and internal piston rod thread Stroke: 80 mm, Piston diameter: 32 mm, Piston rod thread: M8, Cushioning: P: Flexible cushioning rings/plates at both ends, Assembly position: Any

1 in stock
544034 on Powermatic Associates

544034

Festo

mini slide DGSL-25-50-PA With position sensing, highly accurate, durable ball-cage guide, flexible damping on both sides without metallic end position (P). Stroke: 50 mm, Adjustable endposition range/front length: 55 mm, Adjustable endposition range/rear

1 in stock
1804669 on Powermatic Associates

1804669

Festo

standards-based cylinder DSBC-125-250-PPSA-N3 with self-adjusting pneumatic end position cushioning Stroke: 250 mm, Piston diameter: 125 mm, Piston rod thread: M27x2, Cushioning: PPS: Self-adjusting pneumatic end-position cushioning, Assembly position: An

6 in stock
536248 on Powermatic Associates

536248

Festo

compact cylinder ADN-20-40-I-P-A Per ISO 21287, with position sensing and internal piston rod thread Stroke: 40 mm, Piston diameter: 20 mm, Piston rod thread: M6, Cushioning: P: Flexible cushioning rings/plates at both ends, Assembly position: Any

1 in stock
164043 on Powermatic Associates

164043

Festo

flat cylinder DZF-32-80-P-A Non-rotating, for position sensing, with elastic cushioning rings in end positions. Various mounting options, with or without additional mounting components. Stroke: 80 mm, Piston diameter: (* 32 mm, * Equivalent diameter), Max

1 in stock
1383341 on Powermatic Associates

1383341

Festo

standards-based cylinder DSBC-80-250-PPVA-N3 With adjustable cushioning at both ends. Stroke: 250 mm, Piston diameter: 80 mm, Piston rod thread: M20x1,5, Cushioning: PPV: Pneumatic cushioning adjustable at both ends, Assembly position: Any

1 in stock

Manufacturer warranty

557236 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 557236 with other Pneumatic Actuators products

Stroke

Operating pressure

Information on operating ...

Theoretical force at 6 ba...

Pneumatic connection

Material of cylinder barr...

Impact energy in the end ...

Basic weight with 0 mm st...

Type of mounting

Piston rod material

Selected product

557236
Backordered
557236
Festo

compact cylinder ADNGF-11/4"-11/4"-P-A According to ISO 21287, with plain-bearing guide, piston rod ...

Stroke31.75 mm

Operating pressure0.1 MPa ... 1 MPa

Information on operating and pilot mediaOperation with oil lubricati...

Theoretical force at 6 bar, advancing483.001 N

Pneumatic connection1/8 NPT

Material of cylinder barrelWrought aluminum alloy Smoot...

Impact energy in the end positions0.39997 J

Basic weight with 0 mm stroke328.18 g

Type of mountingOptionally: With accessories

Piston rod materialHigh-alloy steel

554226
1 in stock
554226
Festo

compact cylinder ADNGF-20-40-P-A According to ISO 21287, with plain-bearing guide, piston rod secure...

Stroke40 mm

Operating pressure0.15 MPa ... 1 MPa

Information on operating and pilot mediaOperation with oil lubricati...

Theoretical force at 6 bar, advancing-

Pneumatic connection-

Material of cylinder barrel-

Impact energy in the end positions-

Basic weight with 0 mm stroke-

Type of mounting-

Piston rod material-

164043
1 in stock
164043
Festo

flat cylinder DZF-32-80-P-A Non-rotating, for position sensing, with elastic cushioning rings in end...

Stroke80 mm

Operating pressure0.1 MPa ... 1 MPa

Information on operating and pilot mediaOperation with oil lubricati...

Theoretical force at 6 bar, advancing-

Pneumatic connection-

Material of cylinder barrel-

Impact energy in the end positions-

Basic weight with 0 mm stroke-

Type of mounting-

Piston rod material-

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

Recently viewed products

MDI4MRQ34B2-EQ on Powermatic Associates

MDI4MRQ34B2-EQ

Novanta IMS

Novanta IMS MDI4MRQ34B2-EQ is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase AC stepper motor design. It is equipped with an external single-end 512-line optical encoder and a double (2) motor stack, Plus 2 version for expanded features. The connection is facilitated through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a 240Vac supply voltage and is designed for mounting with an 85x85mm flange. It can operate in ambient air temperatures ranging from 0 to +85°C and has a degree of protection rated at IP65. The moment of inertia is specified at 1.6kg.cm2, with a stall torque of 353N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

compact cylinder ADNGF-11/4"-11/4"-P-A According to ISO 21287, with plain-bearing guide, piston rod secured against rotation by means of guide rods and yoke plate. Stroke: 1,25 ", Piston diameter: 1 1/4", Based on the standard: ISO 21287, Cushioning: P: F

Similar products from: Pneumatic Actuators

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock