4080498 Festo Pneumatic Components

Product Details

• Fieldbus interface, connection type
  2x socket
• Power supply, connection pattern
  00995847
• System parameter
  Diagnostic memory System start
• Diagnostics via LED
  EtherCAT error Connection status
• Fieldbus interface, number of poles/wires
  8
• Max. number of modules
  10
• Max. power supply
  8 A
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Max. address capacity outputs
  64 byte
• Fieldbus interface, galvanic isolation
  yes
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Power supply, type of connection
  Terminal strip
• Diagnostics via bus
  Wire break Undervoltage
• Fieldbus interface, protocol
  EtherCAT
• Nominal operating voltage DC for electronics/sensors
  24 V
• Width dimension
  18.9 mm
• CE marking (see declaration of conformity)
  As per EU EMC directive
• Protection against direct and indirect contact
  PELV
• Degree of protection
  IP20
• Fieldbus interface, transmission rate
  100 Mbit/s
Power supply, function
Electronics and sensors
Fieldbus interface, connection technology
RJ45
KC characters
KC EMC
Power supply, conductor diameter
0.2 mm² ... 1.5 mm²
Certificate issuing authority
UL E239998
Ambient temperature
-5 °C ... 50 °C
Information on inputs
62 bytes with I/O diagnostic interface 64 bytes without diagnostics
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Note on ambient temperature
-5 - 60 °C for vertical installation
Fieldbus interface, connection pattern
00995789
Power supply, information on conductor diameter
0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Power supply, connection technology
Spring-loaded terminal
Power supply, number of pins/wires
4
Fieldbus interface, max. address volume for outputs
64 byte
Type code
CPX-E
Storage temperature
-20 °C ... 70 °C
Product weight
145 g
Max. address capacity inputs
64 byte
Type of mounting
With H-rail
Dimensions W x L x H
42.2 mm x 125.8 mm x 76.5 mm
Intrinsic current consumption at nominal operating voltage for electronics/sensors
Typically 64 mA
Fieldbus interface, function
Bus connection, incoming/forwarding
Permissible voltage fluctuations for electronics/sensors
± 25 %
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Module parameters
Channel alarm bundling Channel alarms for undervoltage
Fieldbus interface, max. address volume for inputs
64 byte
Configuration support
ESI file
Power failure buffering
20 ms
Relative air humidity
95 % Non-condensing
Certification
RCM compliance mark c UL us - Listed (OL)
Note on outputs
62 bytes with I/O diagnostic interface 64 bytes without diagnostics
Fieldbus interface, type
EtherCAT
Housing material
PA

4080498 Related Documents