4080494 Festo Pneumatic Components

Product Details

• Electrical connection output, connection technology
  Spring-loaded terminal
• Power supply, connection pattern
  00995847
• Signal range
  -10 - 10 V 4 - 20 mA
• Channel parameters
  Signal range per channel Forcing channel x
• Power supply, type of connection
  2x terminal strip
• Permissible voltage fluctuations load
  ± 25 %
• Note on ambient temperature
  -5 - 60 °C for vertical installation
• Electrical connection output, connection type
  4x terminal strip
• Module parameters
  Parameterization error diagnostics Analog output data format
• Electrical connection for output 2, connection pattern
  00995842
• Electrical connection output 2, connection type
  Terminal strip
• Electrical connection for output, conductor cross section
  0.2 mm² ... 1.5 mm²
• Width dimension
  18.9 mm
• Repetition accuracy
  ±0.05 % at 25 °C
• Electrical isolation between channels
  no
• Protection against direct and indirect contact
  PELV
• Ambient temperature
  -5 °C ... 50 °C
• Max. cable length
  30 m Shielded
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Intrinsic current consumption at nominal operating voltage for electronics/sensors
  Typically 60 mA
Intrinsic current consumption at nominal operating voltage load
Typically 15 mA
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Diagnostics via LED
Faults per channel Faults per module
Electrical connection output 2, connection technology
Spring-loaded terminal
Electrical output connection 2, number of pins/wires
4
Electrical connection for output 2, conductor cross section
0.2 mm² ... 1.5 mm²
Measured variable
Voltage Current
Operating error limit related to the ambient temperature range
±0.3 %
Electrical isolation between channel and internal bus
yes
Relative air humidity
95 % Non-condensing
Product weight
96 g
Type of mounting
With H-rail
Diagnostics via bus
Actuator supply short circuit/overload General error
Power supply, information on conductor diameter
0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Power supply, connection technology
Spring-loaded terminal
KC characters
KC EMC
Electrical connection for output 2, Information on conductor cross section
0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Nominal operating voltage DC load
24 V
Power supply, conductor diameter
0.2 mm² ... 1.5 mm²
Max. residual current of outputs per module
2 A
Certificate issuing authority
UL E239998
Storage temperature
-20 °C ... 70 °C
Certification
RCM compliance mark c UL us - Listed (OL)
Dimensions W x L x H
18.9 mm x 76.6 mm x 124.3 mm
Electrical connection output, function
Analog output
Permissible voltage fluctuations for electronics/sensors
± 25 %
Electrical connection for output, information on conductor cross section
0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Electrical connection output 2, function
Functional ground
Power supply, number of pins/wires
4
Type code
CPX-E
Fuse protection (short circuit)
Internal electronic fuse per module
Power failure buffering
10 ms
Degree of protection
IP20
Data format
15 bit + sign Linear scaling
Housing material
PA
Electrical output connection, number of pins/wires
4
Nominal operating voltage DC for electronics/sensors
24 V
No. of outputs
4
Basic error limit at 25°C
±0.1 %
Corrosion resistance class (CRC)
0 - No corrosion stress
CE marking (see declaration of conformity)
As per EU EMC directive
Max. address capacity outputs
8 byte
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

4080494 Related Documents