4080495 Festo Electrical Peripheral Devices

Product Details

• Note on ambient temperature
  -5 - 50 °C for horizontal installation
• Permissible voltage fluctuations for electronics/sensors
  ± 25 %
• Channel parameters
  Forcing channel x Cycle time
• IO-Link® electrical connection, information on conductor cross section
  0.2 - 2.5 mm² for flexible conductors without cable end sleeves
• Nominal operating voltage DC load
  24 V
• Fuse protection (short circuit)
  Internal electronic fuse, load per channel Internal electronic fuse, sensor per module
• Degree of protection
  IP20
• Certification
  RCM compliance mark c UL us - Listed (OL)
• Housing material
  PA
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Intrinsic current consumption at nominal operating voltage load
  Typically 15 mA
• Power supply, connection technology
  Spring-loaded terminal
• Module parameters
  Actuator supply short circuit diagnostics Deactivate sensor supply
• KC characters
  KC EMC
• Nominal operating voltage DC for electronics/sensors
  24 V
• Electrical isolation between channel and internal bus
  no
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Relative air humidity
  95 % Non-condensing
• Protocol
  IO-Link®
• IO-Link®, number of ports
  4
Type of mounting
With H-rail
Permissible voltage fluctuations load
± 25 %
Intrinsic current consumption at nominal operating voltage for electronics/sensors
Typically 50 mA
Diagnostics via LED
Faults per module Status per channel
IO-Link®, communication
C/Q LED green
Power supply, conductor diameter
0.2 mm² ... 1.5 mm²
IO-Link® electrical connection, conductor cross section
0.2 mm² ... 1.5 mm²
CE marking (see declaration of conformity)
As per EU EMC directive
Storage temperature
-20 °C ... 70 °C
Product weight
96 g
IO-Link®, communication mode
Configurable via software SIO, COM1 (4.8 kBd), COM2 (38.4 kBd), COM3 (230.4 kBd)
IO-Link®, port class
B
IO-Link®, minimum cycle time
Depends on minimally supported cycle time of connected IO-Link® device
Power supply, type of connection
Terminal strip
Power supply, information on conductor diameter
0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Electric IO-Link® connection, connection pattern
00995843
Electrical IO-Link® connection, connection type
4x terminal strip
Width dimension
18.9 mm
Certificate issuing authority
UL E239998
Protection against direct and indirect contact
PELV
IO-Link®, protocol version
Master V 1.1
IO-Link®, process data width OUT
8–32 bytes parameterizable
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Dimensions W x L x H
18.9 mm x 76.6 mm x 124.3 mm
Diagnostics via bus
Device missing/failed General error
Power supply, connection pattern
00995847
Electrical connection, IO-Link®, connection technology
Spring-loaded terminal
Power supply, number of pins/wires
4
Electrical IO-Link® connection, number of pins/wires
6
Type code
CPX-E
Electrical isolation between channels
no
Ambient temperature
-5 °C ... 50 °C
IO-Link®, process data width IN
8–32 bytes parameterizable

4080495 Related Documents