3929369 Festo Positioners
Part#:3929369
Manufacturer:Festo
Category:Positioners
Alt. Part#:CMSX-P-S-C-U-F1-S-130-A
Product Lifecycle:Active
Get a quick Quote!
positioner CMSX-P-S-C-U-F1-S-130-A electropneumatic, for single-acting pneumatic quarter turn actuators, standard nominal flow rate 130 l/min, opening/closing regulation action safety function, 4-wire, power supply 24 VDC, setpoint input 0/4-20 mA, 0-10 V
About the manufacturer: Festo is one of the manufacturers that offers Positioners that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 3929369 Festo price in the box on the right side or send a quick quote.
Product Details
- Analog inputs, galvanic isolation no
- Switching input PNP NPN
- Display 7-segment With backlighting
- Analog inputs, signal range 0 - 10 V 4 - 20 mA
- Analog inputs, linearity error at 25°C 0.5%
- Electrical connection 1, function 2x digital input Load power supply
- Digital outputs, overload protection yes
- Electrical connection 1, tightening torque 0.6 Nm
- Analog outputs, max. load resistance ≤ 600 Ohm
- Setting options Via display and pushbuttons
- Reverse polarity protection for operating voltage connections
- Information on operating and pilot media Operation with oil lubrication not possible
- Pneumatic connection G1/8
- Product weight 970 g
- Note on materials RoHS-compliant
- Material of screws High-alloy stainless steel
- Digital inputs, electrical isolation Yes, optocoupler
- Contamination level 3
- Relative air humidity 93 %
- Electrical connection 1, connection type Terminal strip
- Digital outputs, short circuit current rating yes
- Digital outputs, potential separation Yes, optocoupler
- Analog outputs, overload protection yes
- Storage temperature -20 °C ... 60 °C
- Analog outputs, resolution 12 bit
- Approved cable diameter 7-13 mm for electrical connection 1
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 as per EN 60068-2-6
- Mode of operation Single-acting
- Electrical connection 1, connection technology Screw terminal
- Analog outputs, short-circuit protection yes
- Dimensions W x L x H 190 mm x 105 mm x 130 mm
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 as per EN 60068-2-29
- Analog outputs, signal range 4 - 20 mA
- Analog inputs, temperature coefficient < 0.02 %FS/K
- Max. current consumption 600 mA
- Type code CMSX
- DC operating voltage range 21.6 V ... 26.4 V
- Size of dead space 0.5 % ... 10 %
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Cable fitting M20 x 1.5 for electrical connection 1
- Material for cable connector PA
- Shaft material High-alloy stainless steel
- Analog inputs, resolution 16 bit
- Quick-coupling material High-alloy stainless steel
- Analog outputs, galvanic isolation no
- Mounting position Any
- Analog outputs, reverse polarity protection yes
- Max. cable length 30 m for electrical connection 1
- Analog outputs, linearity error at 25°C 0.5%
- Design digital, electropneumatic positioner
- Input characteristics As per IEC 61131-2, type 3
- Analog outputs, temperature coefficient < 0.02 %FS/K
- Electrical connection 1, conductor cross section < 1.5 mm²
- Electrical connection 1, number of pins/wires 14
- Measuring principle of linear potentiometer Potentiometer
- Certification RCM compliance mark
- Ambient temperature -5 °C ... 60 °C
- Type of mounting With accessories
- Housing material PC-reinforced
- Analog inputs, overload protection yes
- Digital outputs, output current 100 mA
- Blanking plug material PA
- Switching output 3 x PNP or 3 x NPN switchable
- Inspection window material PC
- Digital outputs, reverse polarity protection yes
- Digital inputs, reverse polarity protection yes
- Base plate material Wrought aluminum alloy Anodized
- Design features Safety position – pneumatic outlet 4 exhausted
- Sensing range 0 deg ... 100 deg
- Nominal operating voltage DC 24 V
- Operating pressure 3 bar ... 8 bar
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Degree of protection IP65
- Standard nominal flow rate 130 l/min
- Seals material NBR
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 3929369 Specs
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Relevant products
What can I help you find today?
