3929314 Festo Positioners
Part#:3929314
Manufacturer:Festo
Category:Positioners
Alt. Part#:CMSX-P-S-C-U-F1-D-130-C
Product Lifecycle:Active
Get a quick Quote!
positioner CMSX-P-S-C-U-F1-D-130-C electropneumatic, for double-acting pneumatic quarter turn actuators, standard nominal flow rate 130 l/min, holding regulating action safety function, 4-wire, power supply 24 VDC, setpoint input 0/4-20 mA, 0-10 V, positi
About the manufacturer: Festo is one of the manufacturers that offers Positioners that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 3929314 Festo price in the box on the right side or send a quick quote.
Product Details
- Contamination level 3
- Display 7-segment With backlighting
- Analog inputs, overload protection yes
- Approved cable diameter 7-13 mm for electrical connection 1
- Relative air humidity 93 %
- Analog outputs, resolution 12 bit
- Digital inputs, electrical isolation Yes, optocoupler
- Material of screws High-alloy stainless steel
- Analog inputs, resolution 16 bit
- Digital outputs, output current 100 mA
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 as per EN 60068-2-6
- Electrical connection 1, connection type Terminal strip
- Digital outputs, potential separation Yes, optocoupler
- Analog outputs, short-circuit protection yes
- Electrical connection 1, function 2x digital input Load power supply
- Base plate material Wrought aluminum alloy Anodized
- Analog outputs, max. load resistance ≤ 600 Ohm
- Electrical connection 1, conductor cross section < 1.5 mm²
- DC operating voltage range 21.6 V ... 26.4 V
- Information on operating and pilot media Operation with oil lubrication not possible
- Product weight 970 g
- Seals material NBR
- Switching input PNP NPN
- Mode of operation Double-acting
- Analog inputs, signal range 0 - 10 V 4 - 20 mA
- Max. cable length 30 m for electrical connection 1
- Digital outputs, reverse polarity protection yes
- Digital inputs, reverse polarity protection yes
- Input characteristics As per IEC 61131-2, type 3
- Max. current consumption 600 mA
- Type code CMSX
- Size of dead space 0.5 % ... 10 %
- Degree of protection IP65
- Housing material PC-reinforced
- Storage temperature -20 °C ... 60 °C
- Shaft material High-alloy stainless steel
- Analog inputs, galvanic isolation no
- Quick-coupling material High-alloy stainless steel
- Analog outputs, galvanic isolation no
- Mounting position Any
- Analog outputs, reverse polarity protection yes
- Analog outputs, overload protection yes
- Dimensions W x L x H 190 mm x 105 mm x 130 mm
- Analog outputs, signal range 4 - 20 mA
- Design features Safety position - pneumatic outlets closed
- Nominal operating voltage DC 24 V
- Measuring principle of linear potentiometer Potentiometer
- Certification RCM compliance mark
- Ambient temperature -5 °C ... 60 °C
- Standard nominal flow rate 130 l/min
- Material for cable connector PA
- Blanking plug material PA
- Switching output 3 x PNP or 3 x NPN switchable
- Inspection window material PC
- Analog inputs, linearity error at 25°C 0.5%
- Design digital, electropneumatic positioner
- Digital outputs, overload protection yes
- Electrical connection 1, tightening torque 0.6 Nm
- Reverse polarity protection for operating voltage connections
- Setting options Via display and pushbuttons
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Type of mounting With accessories
- Note on materials RoHS-compliant
- Digital outputs, short circuit current rating yes
- Electrical connection 1, connection technology Screw terminal
- Analog outputs, linearity error at 25°C 0.5%
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 as per EN 60068-2-29
- Analog outputs, temperature coefficient < 0.02 %FS/K
- Analog inputs, temperature coefficient < 0.02 %FS/K
- Electrical connection 1, number of pins/wires 14
- Operating pressure 3 bar ... 8 bar
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Cable fitting M20 x 1.5 for electrical connection 1
- Pneumatic connection G1/8
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 3929314 Specs
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Relevant products
What can I help you find today?
