3929313 Festo Positioners
Part#:3929313
Manufacturer:Festo
Alt. Part#:CMSX-P-S-C-U-F1-D-50-A
Product Lifecycle:Active
Get a quick Quote!
positioner CMSX-P-S-C-U-F1-D-50-A electropneumatic, for double-acting pneumatic quarter turn actuators, standard nominal flow rate 50 l/min, opening/closing regulating action safety function, 4-wire, power supply 24 VDC, setpoint input 0/4-20 mA, 0-10 V,
About the manufacturer: Festo is one of the manufacturers that offers Positioners that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 3929313 Festo price in the box on the right side or send a quick quote.
Product Details
- Switching input PNP NPN
- Blanking plug material PA
- Switching output 3 x PNP or 3 x NPN switchable
- Digital outputs, short circuit current rating yes
- Analog inputs, linearity error at 25°C 0.5%
- Electrical connection 1, function 2x digital input Load power supply
- Analog outputs, signal range 4 - 20 mA
- Analog outputs, temperature coefficient < 0.02 %FS/K
- Type code CMSX
- Setting options Via display and pushbuttons
- Certification RCM compliance mark
- Shaft material High-alloy stainless steel
- Analog inputs, resolution 16 bit
- Approved cable diameter 7-13 mm for electrical connection 1
- Relative air humidity 93 %
- Mode of operation Double-acting
- Electrical connection 1, connection technology Screw terminal
- Material of screws High-alloy stainless steel
- Analog inputs, overload protection yes
- Digital outputs, output current 100 mA
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 as per EN 60068-2-6
- Analog inputs, signal range 0 - 10 V 4 - 20 mA
- Max. cable length 30 m for electrical connection 1
- Analog outputs, linearity error at 25°C 0.5%
- Design features Safety position – pneumatic outlet 4 exhausted Safety position – pneumatic outlet 2 exhausted
- Analog outputs, max. load resistance ≤ 600 Ohm
- Max. current consumption 600 mA
- Reverse polarity protection for operating voltage connections
- Information on operating and pilot media Operation with oil lubrication not possible
- Cable fitting M20 x 1.5 for electrical connection 1
- Note on materials RoHS-compliant
- Seals material NBR
- Analog outputs, resolution 12 bit
- Digital inputs, electrical isolation Yes, optocoupler
- Contamination level 3
- Analog outputs, galvanic isolation no
- Electrical connection 1, connection type Terminal strip
- Digital outputs, potential separation Yes, optocoupler
- Analog outputs, short-circuit protection yes
- Dimensions W x L x H 190 mm x 105 mm x 130 mm
- Input characteristics As per IEC 61131-2, type 3
- Analog inputs, temperature coefficient < 0.02 %FS/K
- Electrical connection 1, conductor cross section < 1.5 mm²
- Measuring principle of linear potentiometer Potentiometer
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Degree of protection IP65
- Standard nominal flow rate 50 l/min
- Storage temperature -20 °C ... 60 °C
- Operating pressure 3 bar ... 8 bar
- Analog inputs, galvanic isolation no
- Quick-coupling material High-alloy stainless steel
- Display 7-segment With backlighting
- Mounting position Any
- Analog outputs, reverse polarity protection yes
- Inspection window material PC
- Analog outputs, overload protection yes
- Design digital, electropneumatic positioner
- Digital inputs, reverse polarity protection yes
- Base plate material Wrought aluminum alloy Anodized
- Nominal operating voltage DC 24 V
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Type of mounting With accessories
- Housing material PC-reinforced
- Digital outputs, reverse polarity protection yes
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 as per EN 60068-2-29
- Digital outputs, overload protection yes
- Electrical connection 1, tightening torque 0.6 Nm
- Electrical connection 1, number of pins/wires 14
- DC operating voltage range 21.6 V ... 26.4 V
- Size of dead space 0.5 % ... 10 %
- Pneumatic connection G1/8
- Material for cable connector PA
- Ambient temperature -5 °C ... 60 °C
- Product weight 970 g
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 3929313 Specs
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Relevant products
What can I help you find today?
