3929312 Festo Positioners

3929312 on Powermatic Associates
Festo

Part#:3929312

Manufacturer:Festo

Alt. Part#:CMSX-P-S-C-U-F1-D-130-A

Product Lifecycle:Active

Get a quick Quote!

positioner CMSX-P-S-C-U-F1-D-130-A electropneumatic, for double-acting pneumatic quarter turn actuators, standard nominal flow rate 130 l/min, opening/closing regulating action safety function, 4-wire, power supply 24 VDC, setpoint input 0/4-20 mA, 0-10 V

About the manufacturer: Festo is one of the manufacturers that offers Positioners that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 3929312 Festo price in the box on the right side or send a quick quote.

Product Details

  • Analog inputs, overload protection
    yes
  • Approved cable diameter
    7-13 mm for electrical connection 1
  • Quick-coupling material
    High-alloy stainless steel
  • Mode of operation
    Double-acting
  • Analog outputs, reverse polarity protection
    yes
  • Max. cable length
    30 m for electrical connection 1
  • Digital outputs, reverse polarity protection
    yes
  • Digital inputs, reverse polarity protection
    yes
  • Input characteristics
    As per IEC 61131-2, type 3
  • Analog outputs, max. load resistance
    ≤ 600 Ohm
  • Storage temperature
    -20 °C ... 60 °C
  • Material of screws
    High-alloy stainless steel
  • Analog inputs, resolution
    16 bit
  • Vibration resistance
    Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 as per EN 60068-2-6
  • Analog outputs, galvanic isolation
    no
  • Relative air humidity
    93 %
  • Electrical connection 1, connection technology
    Screw terminal
  • Inspection window material
    PC
  • Analog outputs, overload protection
    yes
  • Design
    digital, electropneumatic positioner
  • Analog outputs, signal range
    4 - 20 mA
  • Electrical connection 1, tightening torque
    0.6 Nm
  • Electrical connection 1, conductor cross section
    < 1.5 mm²
  • Setting options
    Via display and pushbuttons
  • Certification
    RCM compliance mark
  • Ambient temperature
    -5 °C ... 60 °C
  • CE marking (see declaration of conformity)
    As per EU EMC directive As per EU RoHS directive
  • Note on materials
    RoHS-compliant
  • Shaft material
    High-alloy stainless steel
  • Analog inputs, galvanic isolation
    no
  • Digital outputs, output current
    100 mA
  • Display
    7-segment With backlighting
  • Blanking plug material
    PA
  • Digital outputs, short circuit current rating
    yes
  • Analog inputs, linearity error at 25°C
    0.5%
  • Electrical connection 1, function
    2x digital input Load power supply
  • Digital outputs, overload protection
    yes
  • Analog outputs, temperature coefficient
    < 0.02 %FS/K
  • Type code
    CMSX
  • Measuring principle of linear potentiometer
    Potentiometer
  • DC operating voltage range
    21.6 V ... 26.4 V
  • Information on operating and pilot media
    Operation with oil lubrication not possible
  • Type of mounting
    With accessories
  • Pneumatic connection
    G1/8
  • Switching input
    PNP NPN
  • Electrical connection 1, connection type
    Terminal strip
  • Switching output
    3 x PNP or 3 x NPN switchable
  • Analog outputs, short-circuit protection
    yes
  • Dimensions W x L x H
    190 mm x 105 mm x 130 mm
  • Shock resistance
    Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 as per EN 60068-2-29
  • Analog inputs, temperature coefficient
    < 0.02 %FS/K
  • Nominal operating voltage DC
    24 V
  • Operating pressure
    3 bar ... 8 bar
  • Size of dead space
    0.5 % ... 10 %
  • Degree of protection
    IP65
  • Product weight
    970 g
  • Housing material
    PC-reinforced
  • Material for cable connector
    PA
  • Analog outputs, resolution
    12 bit
  • Digital inputs, electrical isolation
    Yes, optocoupler
  • Contamination level
    3
  • Mounting position
    Any
  • Analog inputs, signal range
    0 - 10 V 4 - 20 mA
  • Digital outputs, potential separation
    Yes, optocoupler
  • Analog outputs, linearity error at 25°C
    0.5%
  • Base plate material
    Wrought aluminum alloy Anodized
  • Design features
    Safety position – pneumatic outlet 4 exhausted Safety position – pneumatic outlet 2 exhausted
  • Max. current consumption
    600 mA
  • Electrical connection 1, number of pins/wires
    14
  • Reverse polarity protection
    for operating voltage connections
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Cable fitting
    M20 x 1.5 for electrical connection 1
  • Standard nominal flow rate
    130 l/min
  • Seals material
    NBR

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.



Related documents 3929312 Specs

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery


Secure Payment Processing


Warranty


Responsive Customer Support

Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Relevant products

What can I help you find today?

Recommended parts