Powermatic Associates Logo

159884 Festo Pneumatic Actuators

159884 on Powermatic Associates
Festo

Part#:159884

Alt. Part#:DPZ-25-50-P-A-S2

Manufacturer:Festo

Category:Pneumatic Actuators

Product Lifecycle:Active

Product description

twin-piston cylinder DPZ-25-50-P-A-S2 With two parallel piston rods, for proximity sensing, with elastic cushioning rings in end positions. Stroke: 50 mm, Adjustable end-position range/length: 10 mm, Piston diameter: 25 mm, Operating mode of drive unit: Y

Product Details

  • Variants
    Through piston rod
  • Ambient temperature
    -20 °C ... 80 °C
  • Alternative connections
    See product drawing
  • Housing material
    Wrought aluminum alloy
  • Stroke
    50 mm
  • Cushioning
    Elastic cushioning rings/pads at both ends
  • Mounting position
    Any
  • Mode of operation
    Double-acting
  • Theoretical force at 6 bar, retracting
    452 N
  • Piston rod material
    High-alloy stainless steel
  • Type code
    DPZ
  • Position sensing
    For proximity sensor
  • Information on operating and pilot media
    Operation with oil lubrication possible (required for further use)
  • Pneumatic connection
    M5
  • Piston diameter
    25 mm
  • Guide
    Sliding guide
  • Symbol
    00991915
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Seals material
    NBR
  • Adjustable end position range/length
    10 mm
  • Drive unit operating mode
    Yoke
  • Design
    Guide
  • Operating pressure
    0.1 MPa ... 1 MPa
  • Impact energy in the end positions
    0.3 J
  • Theoretical force at 6 bar, advancing
    452 N
  • Cover material
    Wrought aluminum alloy

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

159884 Related Documents

159884 DataSheet.pdf

Similar products from: Festo Pneumatic Actuators

536287 on Powermatic Associates

536287

Festo

compact cylinder ADN-32-80-I-P-A Per ISO 21287, with position sensing and internal piston rod thread Stroke: 80 mm, Piston diameter: 32 mm, Piston rod thread: M8, Cushioning: P: Flexible cushioning rings/plates at both ends, Assembly position: Any

1 in stock
544034 on Powermatic Associates

544034

Festo

mini slide DGSL-25-50-PA With position sensing, highly accurate, durable ball-cage guide, flexible damping on both sides without metallic end position (P). Stroke: 50 mm, Adjustable endposition range/front length: 55 mm, Adjustable endposition range/rear

1 in stock
1804669 on Powermatic Associates

1804669

Festo

standards-based cylinder DSBC-125-250-PPSA-N3 with self-adjusting pneumatic end position cushioning Stroke: 250 mm, Piston diameter: 125 mm, Piston rod thread: M27x2, Cushioning: PPS: Self-adjusting pneumatic end-position cushioning, Assembly position: An

6 in stock
164043 on Powermatic Associates

164043

Festo

flat cylinder DZF-32-80-P-A Non-rotating, for position sensing, with elastic cushioning rings in end positions. Various mounting options, with or without additional mounting components. Stroke: 80 mm, Piston diameter: (* 32 mm, * Equivalent diameter), Max

1 in stock
536248 on Powermatic Associates

536248

Festo

compact cylinder ADN-20-40-I-P-A Per ISO 21287, with position sensing and internal piston rod thread Stroke: 40 mm, Piston diameter: 20 mm, Piston rod thread: M6, Cushioning: P: Flexible cushioning rings/plates at both ends, Assembly position: Any

1 in stock
170860 on Powermatic Associates

170860

Festo

guided drive DFM-32-100-P-A-GF With integrated guide. Centre of gravity distance from working load to yoke plate: 50 mm, Stroke: 100 mm, Piston diameter: 32 mm, Operating mode of drive unit: Yoke, Cushioning: P: Flexible cushioning rings/plates at both en

2 in stock

Manufacturer warranty

159884 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 159884 with other Pneumatic Actuators products

Variants

Ambient temperature

Alternative connections

Housing material

Stroke

Cushioning

Mounting position

Mode of operation

Theoretical force at 6 ba...

Piston rod material

Selected product

159884
Backordered
159884
Festo

twin-piston cylinder DPZ-25-50-P-A-S2 With two parallel piston rods, for proximity sensing, with ela...

VariantsThrough piston rod

Ambient temperature-20 °C ... 80 °C

Alternative connectionsSee product drawing

Housing materialWrought aluminum alloy

Stroke50 mm

CushioningElastic cushioning rings/pad...

Mounting positionAny

Mode of operationDouble-acting

Theoretical force at 6 bar, retracting452 N

Piston rod materialHigh-alloy stainless steel

170824
1 in stock
170824
Festo

guided drive DFM-12-10-P-A-GF With integrated guide. Centre of gravity distance from working load to...

Variants-

Ambient temperature-

Alternative connections-

Housing material-

Stroke10 mm

CushioningElastic cushioning rings/pad...

Mounting positionAny

Mode of operation-

Theoretical force at 6 bar, retracting-

Piston rod material-

170860
2 in stock
170860
Festo

guided drive DFM-32-100-P-A-GF With integrated guide. Centre of gravity distance from working load t...

Variants-

Ambient temperature-

Alternative connections-

Housing material-

Stroke100 mm

CushioningElastic cushioning rings/pad...

Mounting positionAny

Mode of operation-

Theoretical force at 6 bar, retracting-

Piston rod material-

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

twin-piston cylinder DPZ-25-50-P-A-S2 With two parallel piston rods, for proximity sensing, with elastic cushioning rings in end positions. Stroke: 50 mm, Adjustable end-position range/length: 10 mm, Piston diameter: 25 mm, Operating mode of drive unit: Y

Similar products from: Pneumatic Actuators

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock