1470773 Festo Electric Actuators

Product Details

• Size
  25
• Reversing backlash
  100 µm
• Type code
  EPCO
• Motor type
  Stepper motor
• Spindle pitch
  10 mm/U
• Mounting position
  Any
• Spindle type
  Ball screw drive
• Max. acceleration
  10 m/s²
• Motor nominal current
  3 A
• Storage temperature
  -20 °C ... 60 °C
• Piston rod thread
  M8
• Max. angle of rotation of the piston rod +/-
  1.5 deg
• Rotor position sensor
  Incremental encoder
• Max. speed
  0.5 m/s
• Insulation protection class
  B
• Ambient temperature
  0 °C ... 50 °C
• Max. torque My
  1 Nm
• Max. feed force Fx
  105 N
• Basic weight with 0 mm stroke
  1125 g
• Stroke reserve
  0 mm
Screw diameter
10 mm
Piston rod end
External thread
Rotor position sensor interface
RS422 TTL A/B channels + zero index
Repetition accuracy
±0.02 mm
Nominal operating voltage DC
24 V
Stroke
150 mm
Step angle with full step
1.8 deg
Step angle tolerance
±5%
Design
Electric actuator with ball screw drive
Rotor position sensor measuring principle
Optical
Duty cycle
100%
Corrosion resistance class (CRC)
1 - Low corrosion stress
Relative air humidity
0 - 85 % Non-condensing
Guide value for payload, horizontal
20 kg
Mass moment of inertia JO
0.094 kgcm²
Protection against torsion/guide
With plain-bearing guide
CE marking (see declaration of conformity)
As per EU EMC directive
Certification
RCM compliance mark c UL us - Recognized (OL)
Max. torque Mz
1 Nm
Mass moment of inertia JL per kg of payload
0.0254 kgcm²
Additional moving mass per 10 mm stroke
2.6 g
Cover material
Wrought aluminum alloy Smooth anodized
Piston rod material
High-alloy stainless steel
Degree of protection
IP40
Max. torque Mx
0 Nm
Mass moment of inertia JH per meter of stroke
0.0578 kgcm²
Additional weight per 10 mm stroke
34 g
Type of mounting
With internal thread With accessories
Material of cylinder barrel
Wrought aluminum alloy Smooth anodized
Spindle nut material
Steel
Impact energy in the end positions
2.0E-4 J
Guide value for payload, vertical
10 kg
Moving mass at 0 mm stroke
145 g
Housing material
Wrought aluminum alloy Smooth anodized
Electrical connection technology
Plug
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle material
Roller bearing steel

1470773 Related Documents