1470700 Festo Electric Actuators

Name: 1470700
Brand: Festo

Part#:1470700

Manufacturer:Festo

Alt. Part#:EPCO-25-100-3P-ST-E

Product Lifecycle:Active

Get a quick Quote!

electric cylinder EPCO-25-100-3P-ST-E Mechanical linear drive with piston rod and fixed stepper motor. Size: 25, Stroke: 100 mm, Stroke reserve: 0 mm, Piston rod thread: M8, Reversing backlash: 0,1 mm

About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 1470700 Festo price in the box on the right side or send a quick quote.

Product Details

Stroke reserve
0 mm
Spindle pitch
3 mm/U
Rotor position sensor interface
RS422 TTL A/B channels + zero index
Repetition accuracy
±0.02 mm
Degree of protection
IP40
Max. torque Mx
0 Nm
Size
25
Piston rod thread
M8
Step angle tolerance
±5%
Stroke
100 mm
Reversing backlash
100 µm
Piston rod end
External thread
Motor type
Stepper motor
Type code
EPCO
Protection against torsion/guide
With plain-bearing guide
Max. speed
0.15 m/s
Step angle with full step
1.8 deg
Screw diameter
10 mm
Mounting position
Any
Spindle type
Ball screw drive

Rotor position sensor

Incremental encoder

Nominal operating voltage DC

24 V

Storage temperature

-20 °C ... 60 °C

Certification

RCM compliance mark c UL us - Recognized (OL)

Max. angle of rotation of the piston rod +/-

1.5 deg

Design

Electric actuator with ball screw drive

Rotor position sensor measuring principle

Optical

Duty cycle

100%

Corrosion resistance class (CRC)

1 - Low corrosion stress

Ambient temperature

0 °C ... 50 °C

Max. torque Mz

1 Nm

Mass moment of inertia JH per meter of stroke

0.0487 kgcm²

Moving mass at 0 mm stroke

145 g

Housing material

Wrought aluminum alloy Smooth anodized

Spindle nut material

Steel

Max. acceleration

10 m/s²

Insulation protection class

Motor nominal current

3 A

Impact energy in the end positions

2.0E-4 J

Guide value for payload, horizontal

60 kg

Mass moment of inertia JO

0.0933 kgcm²

Electrical connection technology

Plug

Piston rod material

High-alloy stainless steel

CE marking (see declaration of conformity)

As per EU EMC directive

Relative air humidity

0 - 85 % Non-condensing

Max. feed force Fx

350 N

Mass moment of inertia JL per kg of payload

0.0023 kgcm²

Note on materials

Contains paint-wetting impairment substances RoHS-compliant

Cover material

Wrought aluminum alloy Smooth anodized

Material of cylinder barrel

Wrought aluminum alloy Smooth anodized

Max. torque My

1 Nm

Additional weight per 10 mm stroke

34 g

Additional moving mass per 10 mm stroke

2.6 g

Spindle material

Roller bearing steel

Guide value for payload, vertical

30 kg

Basic weight with 0 mm stroke

1125 g

Type of mounting

With internal thread With accessories

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric