1470706 Festo Electric Actuators

Product Details

• Max. angle of rotation of the piston rod +/-
  1.5 deg
• Spindle type
  Ball screw drive
• Rotor position sensor
  Incremental encoder
• Max. acceleration
  10 m/s²
• CE marking (see declaration of conformity)
  As per EU EMC directive
• Degree of protection
  IP40
• Relative air humidity
  0 - 85 % Non-condensing
• Guide value for payload, horizontal
  60 kg
• Basic weight with 0 mm stroke
  1125 g
• Cover material
  Wrought aluminum alloy Smooth anodized
• Size
  25
• Step angle with full step
  1.8 deg
• Piston rod thread
  M8
• Spindle pitch
  3 mm/U
• Type code
  EPCO
• Protection against torsion/guide
  With plain-bearing guide
• Repetition accuracy
  ±0.02 mm
• Nominal operating voltage DC
  24 V
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Max. torque Mx
  0 Nm
Mass moment of inertia JO
0.0933 kgcm²
Stroke reserve
0 mm
Reversing backlash
100 µm
Mounting position
Any
Rotor position sensor interface
RS422 TTL A/B channels + zero index
Insulation protection class
B
Ambient temperature
0 °C ... 50 °C
Max. torque Mz
1 Nm
Guide value for payload, vertical
30 kg
Housing material
Wrought aluminum alloy Smooth anodized
Spindle material
Roller bearing steel
Stroke
300 mm
Step angle tolerance
±5%
Motor type
Stepper motor
Max. speed
0.15 m/s
Corrosion resistance class (CRC)
1 - Low corrosion stress
Impact energy in the end positions
2.0E-4 J
Max. feed force Fx
350 N
Mass moment of inertia JL per kg of payload
0.0023 kgcm²
Electrical connection technology
Plug
Piston rod material
High-alloy stainless steel
Spindle nut material
Steel
Screw diameter
10 mm
Piston rod end
External thread
Design
Electric actuator with ball screw drive
Rotor position sensor measuring principle
Optical
Duty cycle
100%
Motor nominal current
3 A
Storage temperature
-20 °C ... 60 °C
Max. torque My
1 Nm
Mass moment of inertia JH per meter of stroke
0.0487 kgcm²
Moving mass at 0 mm stroke
145 g
Additional weight per 10 mm stroke
34 g
Material of cylinder barrel
Wrought aluminum alloy Smooth anodized
Additional moving mass per 10 mm stroke
2.6 g
Type of mounting
With internal thread With accessories
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

1470706 Related Documents