T30AW3R

Banner

Product Lifecycle: Active

Banner Engineering T30AW3R is a photo-electric sensor designed for through-beam system applications, part of the T30 series. This sensor functions as a receiver alone, housed in a thermoplastic material. It features a pre-wired connection with a 6.5ft / 2m cable terminated with bare end flying leads. The T30AW3R operates on a supply voltage ranging from 20Vac to 250Vac, with nominal voltages at 200Vac, 220Vac, and 240Vac. It is designed to work within an ambient air temperature range of -40 to +70°C and offers a high degree of protection rated at IP69K NEMA 6P. The sensor's shape is an M30 cylindrical threaded/barrel, equipped with 1 x digital output (Solid-state AC output; SPST contact type). It boasts a sensing distance of up to 60m and utilizes infrared light with a wavelength of 950 nm. The response time of the sensor is 16ms / 0.016 s, operating in Light-ON mode, and it features an M30 thread size.

T30AW3R

Banner Engineering T30AW3R is a photo-electric sensor designed for through-beam system applications, part of the T30 series. This sensor functions as a receiver alone, housed in a thermoplastic material. It features a pre-wired connection with a 6.5ft / 2m cable terminated with bare end flying leads. The T30AW3R operates on a supply voltage ranging from 20Vac to 250Vac, with nominal voltages at 200Vac, 220Vac, and 240Vac. It is designed to work within an ambient air temperature range of -40 to +70°C and offers a high degree of protection rated at IP69K NEMA 6P. The sensor's shape is an M30 cylindrical threaded/barrel, equipped with 1 x digital output (Solid-state AC output; SPST contact type). It boasts a sensing distance of up to 60m and utilizes infrared light with a wavelength of 950 nm. The response time of the sensor is 16ms / 0.016 s, operating in Light-ON mode, and it features an M30 thread size.

T30 3R/6R CABLE/PIGTAIL.pdf

T30 3R/6R CABLE/PIGTAIL.stp

Product details

T30 3R/6R CABLE/PIGTAIL.pdf

T30 3R/6R CABLE/PIGTAIL.stp

Feature: EncapsulatedYes
DeviceNetNo
Feature: AudibleNo
IO LinkNo
Feature: Chemical ResistantNo
Feature: Hazardous AreaNo

Feature: Ecolab CertifiedYes

Feature: Timing (Hold/Delay)No

Feature: Washdown RatedYes

Opposed Mode Emitter/ReceiverReceiver

Barrel Diameter (mm)30

IndicatorLEDs

AdjustmentsN/A

IP RatingIP69

Number of Pins3

Repeatability (µs)2000

Lens MaterialAcrylic

NEMA RatingNEMA 6P

Max Op. Relative Humidity [%]90% @ 50°C

Delay at Power-up (ms)100

Special Feature: Water DetectionNo

Special Feature: Remote TeachNo

Special Feature: Intrinsically SafeNo

Output response time (ms)16 ON/8 OFF

Quick Disconnect TypeNo QD

Max Op. Temp. (°C)70

OperationLight Operate

Min Op. Temp. (°C)-40

ConnectionCable

Power Supply/Supply Voltage20-250 V ac

OutputsSolid-State AC Switch

Max Sensing Distance (mm)60000

Sensing Mode (Detailed)Receiver

Input/OutputSolid-State AC Switch

Primary Housing MaterialThermoplastic

Sensing Mode (General)Opposed

Housing StyleBarrel

PowerAC

Sensing BeamInfrared LED

Cable Length (m)2

Get a quick quote

Select Qty:

Average response time:

11 minutes

This part can ship within 24h!

Fast worldwide Shipping and Delivery

Shipping cost will be calculated during checkout

Payments methods

Secure Payment Processing
with money back guarantee

1 year warranty on all parts

Responsive Customer Support
with personalized assistance

Need more details?

Feel free to chat with us.

Relevant products

DX80DR9M-H5

Banner Engineering DX80DR9M-H5 is a Gateway designed for surface mounting with a polycarbonate housing, polycarbonate rotary dial cover, polyester labels, EDPM rubber cover gasket, and nitrile rubber. It operates within an ambient air temperature range of -40 to +85°C and offers a degree of protection rated at IP67 NEMA 6. The dimensions of this rectangular-shaped gateway are H44.5mm x W103.3mm x D80.1mm. It features 2 digital outputs (30Vdc; NMOS; 1A), 4 analog inputs (0-20mA), and 4 digital inputs (30Vdc 3mA; NPN). The DX80DR9M-H5 utilizes MultiHop flexpower data radio technology within the MultiHop Modbus IO data radios sub-range and includes design elements such as 2 buttons, 2 bi-color LEDs, and employs FHSS (Frequency Hopping Spread Spectrum) technology. Connection options include a wiring chamber with screw-clamp connections, 4 x Pg7 cable accesses, a gld. 1/2" NPT threaded cable access, a 5-pin M12 male connector, and an RP-SMA connector. It requires a supply voltage of 10-30Vdc (12Vdc-24Vdc nom.), supports RS-485 Modbus RTU communication protocol, operates on a 900MHz ISM band with 1W power, and can achieve a maximum transmission distance of 9.6km at nominal emission power.

LE250UQ

Banner Engineering LE250UQ is a Class 2 laser displacement sensor/transmitter designed for precise distance measurement. It operates on a triangulation system and features an LCD display for easy setup through TEACH mode. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection within a range of 100 to 400mm. It is housed in a durable die-cast zinc alloy with an acrylic window, ensuring robustness in challenging environments. The LE250UQ is equipped with a 5-pin Euro-style M12 connector for straightforward connectivity. It offers both overload and short-circuit protection, enhancing its operational safety. This sensor operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55 °C. It boasts an IP67 and NEMA 6 rating for high degrees of protection against dust and water ingress. The LE250UQ provides one analog output (0-10Vdc) and one digital output (PNP/NPN transistor), accommodating versatile application needs.

Q45VR3FQ

Banner Engineering Q45VR3FQ is a photo-electric fiber optic sensor designed for versatile applications, featuring an M30 threaded mount for secure installation. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a potentiometer for easy adjustment. The sensor comes pre-equipped with a 5-pin 7/8" mini connector for straightforward connectivity. It supports a wide supply voltage range, accepting 24Vac-250Vac (with 200Vac, 220Vac, and 240Vac as nominal values) and 12Vdc-250Vdc (with 24Vdc, 48Vdc, and 120Vdc as nominal values), catering to diverse power supply requirements. Part of the Q45VR3 series, this sensor boasts an IP67 NEMA 6P degree of protection, ensuring durability in harsh environments. Its rectangular shape is constructed from a thermoplastic housing with glass fiber, designed for longevity. The sensor emits an infrared light with a wavelength of 880 nm and features a single digital output (SPDT relay contact) with a response time of 15ms (0.015 seconds), facilitating rapid detection tasks.

This item can ship within 24h!

T30AW3FF600Q1

Banner Engineering T30AW3FF600Q1 is a fixed-field photo-electric sensor from the T30 series, designed with a background suppression system. This sensor features a thermoplastic housing and is pre-equipped with a 4-pin 1/2" micro connector for connectivity. It operates on a supply voltage range of 20Vac-250Vac (with nominal voltages of 200Vac, 220Vac, and 240Vac) and can function within an ambient air temperature range of -40 to +70°C. The T30AW3FF600Q1 offers a degree of protection rated at IP69K NEMA 6P, making it suitable for demanding environments. Its M30 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (Solid-state AC output; SPST contact type) and has a sensing distance of 600mm. It utilizes infrared light with a wavelength of 880 nm and has a response time of 16ms (0.016 s). The operating mode for this sensor is Light-ON.

BWA-QD5.5

Banner Engineering BWA-QD5.5 is a single-ended cable/cordset designed for automation applications, featuring a 5-pin M12 connector on one end and 1/2"-14 NBSM bare end flying leads on the other.

73122

Banner - 73122

WLF12PXRGB1200SQP

Banner - WLF12PXRGB1200SQP

DX80DR9M-H5

Banner Engineering DX80DR9M-H5 is a Gateway designed for surface mounting with a polycarbonate housing, polycarbonate rotary dial cover, polyester labels, EDPM rubber cover gasket, and nitrile rubber. It operates within an ambient air temperature range of -40 to +85°C and offers a degree of protection rated at IP67 NEMA 6. The dimensions of this rectangular-shaped gateway are H44.5mm x W103.3mm x D80.1mm. It features 2 digital outputs (30Vdc; NMOS; 1A), 4 analog inputs (0-20mA), and 4 digital inputs (30Vdc 3mA; NPN). The DX80DR9M-H5 utilizes MultiHop flexpower data radio technology within the MultiHop Modbus IO data radios sub-range and includes design elements such as 2 buttons, 2 bi-color LEDs, and employs FHSS (Frequency Hopping Spread Spectrum) technology. Connection options include a wiring chamber with screw-clamp connections, 4 x Pg7 cable accesses, a gld. 1/2" NPT threaded cable access, a 5-pin M12 male connector, and an RP-SMA connector. It requires a supply voltage of 10-30Vdc (12Vdc-24Vdc nom.), supports RS-485 Modbus RTU communication protocol, operates on a 900MHz ISM band with 1W power, and can achieve a maximum transmission distance of 9.6km at nominal emission power.

LE250UQ

Banner Engineering LE250UQ is a Class 2 laser displacement sensor/transmitter designed for precise distance measurement. It operates on a triangulation system and features an LCD display for easy setup through TEACH mode. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection within a range of 100 to 400mm. It is housed in a durable die-cast zinc alloy with an acrylic window, ensuring robustness in challenging environments. The LE250UQ is equipped with a 5-pin Euro-style M12 connector for straightforward connectivity. It offers both overload and short-circuit protection, enhancing its operational safety. This sensor operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55 °C. It boasts an IP67 and NEMA 6 rating for high degrees of protection against dust and water ingress. The LE250UQ provides one analog output (0-10Vdc) and one digital output (PNP/NPN transistor), accommodating versatile application needs.

Q45VR3FQ

Banner Engineering Q45VR3FQ is a photo-electric fiber optic sensor designed for versatile applications, featuring an M30 threaded mount for secure installation. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a potentiometer for easy adjustment. The sensor comes pre-equipped with a 5-pin 7/8" mini connector for straightforward connectivity. It supports a wide supply voltage range, accepting 24Vac-250Vac (with 200Vac, 220Vac, and 240Vac as nominal values) and 12Vdc-250Vdc (with 24Vdc, 48Vdc, and 120Vdc as nominal values), catering to diverse power supply requirements. Part of the Q45VR3 series, this sensor boasts an IP67 NEMA 6P degree of protection, ensuring durability in harsh environments. Its rectangular shape is constructed from a thermoplastic housing with glass fiber, designed for longevity. The sensor emits an infrared light with a wavelength of 880 nm and features a single digital output (SPDT relay contact) with a response time of 15ms (0.015 seconds), facilitating rapid detection tasks.

This item can ship within 24h!

T30AW3FF600Q1

Banner Engineering T30AW3FF600Q1 is a fixed-field photo-electric sensor from the T30 series, designed with a background suppression system. This sensor features a thermoplastic housing and is pre-equipped with a 4-pin 1/2" micro connector for connectivity. It operates on a supply voltage range of 20Vac-250Vac (with nominal voltages of 200Vac, 220Vac, and 240Vac) and can function within an ambient air temperature range of -40 to +70°C. The T30AW3FF600Q1 offers a degree of protection rated at IP69K NEMA 6P, making it suitable for demanding environments. Its M30 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (Solid-state AC output; SPST contact type) and has a sensing distance of 600mm. It utilizes infrared light with a wavelength of 880 nm and has a response time of 16ms (0.016 s). The operating mode for this sensor is Light-ON.

DX80DR9M-H5

Banner Engineering DX80DR9M-H5 is a Gateway designed for surface mounting with a polycarbonate housing, polycarbonate rotary dial cover, polyester labels, EDPM rubber cover gasket, and nitrile rubber. It operates within an ambient air temperature range of -40 to +85°C and offers a degree of protection rated at IP67 NEMA 6. The dimensions of this rectangular-shaped gateway are H44.5mm x W103.3mm x D80.1mm. It features 2 digital outputs (30Vdc; NMOS; 1A), 4 analog inputs (0-20mA), and 4 digital inputs (30Vdc 3mA; NPN). The DX80DR9M-H5 utilizes MultiHop flexpower data radio technology within the MultiHop Modbus IO data radios sub-range and includes design elements such as 2 buttons, 2 bi-color LEDs, and employs FHSS (Frequency Hopping Spread Spectrum) technology. Connection options include a wiring chamber with screw-clamp connections, 4 x Pg7 cable accesses, a gld. 1/2" NPT threaded cable access, a 5-pin M12 male connector, and an RP-SMA connector. It requires a supply voltage of 10-30Vdc (12Vdc-24Vdc nom.), supports RS-485 Modbus RTU communication protocol, operates on a 900MHz ISM band with 1W power, and can achieve a maximum transmission distance of 9.6km at nominal emission power.

LE250UQ

Banner Engineering LE250UQ is a Class 2 laser displacement sensor/transmitter designed for precise distance measurement. It operates on a triangulation system and features an LCD display for easy setup through TEACH mode. This sensor emits a visible class 2 red laser with a wavelength of 650 nm for displacement detection within a range of 100 to 400mm. It is housed in a durable die-cast zinc alloy with an acrylic window, ensuring robustness in challenging environments. The LE250UQ is equipped with a 5-pin Euro-style M12 connector for straightforward connectivity. It offers both overload and short-circuit protection, enhancing its operational safety. This sensor operates on a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and can function within an ambient air temperature range of -20 to +55 °C. It boasts an IP67 and NEMA 6 rating for high degrees of protection against dust and water ingress. The LE250UQ provides one analog output (0-10Vdc) and one digital output (PNP/NPN transistor), accommodating versatile application needs.

Q45VR3FQ

Banner Engineering Q45VR3FQ is a photo-electric fiber optic sensor designed for versatile applications, featuring an M30 threaded mount for secure installation. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a potentiometer for easy adjustment. The sensor comes pre-equipped with a 5-pin 7/8" mini connector for straightforward connectivity. It supports a wide supply voltage range, accepting 24Vac-250Vac (with 200Vac, 220Vac, and 240Vac as nominal values) and 12Vdc-250Vdc (with 24Vdc, 48Vdc, and 120Vdc as nominal values), catering to diverse power supply requirements. Part of the Q45VR3 series, this sensor boasts an IP67 NEMA 6P degree of protection, ensuring durability in harsh environments. Its rectangular shape is constructed from a thermoplastic housing with glass fiber, designed for longevity. The sensor emits an infrared light with a wavelength of 880 nm and features a single digital output (SPDT relay contact) with a response time of 15ms (0.015 seconds), facilitating rapid detection tasks.

Friendly Powermatic robot

What can I help you find today?