Powermatic Associates Logo

T186UE Banner Ultrasonic Sensors

T186UE on Powermatic Associates
Banner

Part#:T186UE

Manufacturer:Banner

Alt. Part#:38269

Product Lifecycle:Active

Get a quick Quote!

T18U Series: Emitter; Range: 300-600 mm; Input: 12-30 V dc; Output: Not Applicable; 2 m (6.5 ft) Cable

About the manufacturer: Banner is one of the manufacturers that offers Ultrasonic Sensors that you can order at Powermatic Associates site. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the T186UE Banner price in the box on the right side or send a quick quote.

Product Details

  • Weight
    154.22128 g
  • Country Of Origin
    MX
  • SSI
    No
  • RS-422
    No
  • PROFINET
    No
  • Common Ethernet Protocol
    No
  • Ultrasonic Frequency (kHz)
    230
  • Feature: Clear Object Detection
    Yes
  • Wireless
    No
  • Profibus
    No
  • 1-wire Serial Interface
    No
  • RS-485
    No
  • RS-232
    No
  • IO Link
    No
  • Application: Ultrasonic
    Yes
  • Supply Protection Circuitry
    Protected against reverse polarity and transient overvoltages
  • Feature: Chemical Resistant
    No
  • Feature: Timing (Hold/Delay)
    No
  • Barrel Diameter (mm)
    18
  • Power/Current Consumption (exclusive of load)
    50 mA
  • Rep Rate (ms)
    Normal Resolution Mode: 8; High Resolution Mode: 5
  • Min Operating Temperature (°C)
    -40
  • Minimum Response Time (ms)
    1
  • Max Operating Temperature (°C)
    70
  • NEMA Rating
    NEMA 6P
  • Mechanical Shock (Additional Comments)
    MIL-STD-202G, Meth. 213B, conditions H&I (Shock: 75G with unit operation: 100G for non-operation).
  • IP Rating
    IP67
  • Mechanical Shock
    IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
  • Vibration
    MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
  • Power Supply
    12-30 V dc
  • Number of Pins
    2
  • Delay at Power-up (ms)
    100
  • Connection
    Flying Leads
  • Minimum Sensing Distance (mm)
    300
  • Indicator
    LED(s)
  • Primary Housing Material
    PBT
  • Max Sensing Distance (mm)
    600
  • Quick Disconnect Type
    No QD
  • Device Type
    Sensor
  • PC Configurable
    No
  • Cable Length (m)
    2
  • Housing Style
    Rectangular w/M18 Mount
  • Sensing Mode (Detailed)
    Emitter
  • Sensing Mode (General)
    Opposed
  • Power
    DC
  • Sensing Beam
    Ultrasonic
  • Max Measurement Range
    >500 mm - <=1000 mm
  • Sub-range name
    T18U series
  • Connection type
    Pre-wired with 6.5ft / 2m cable terminated with bare end flying leads
  • Design
    through-beam system / opposed mode
  • Mounting mode
    Threaded mount
  • Ambient air temperature for operation
    -40...+70 °C
  • Product series / family name
    U-GAGE series
  • Functions
    Ultrasonic emitter green LED (power ON) yellow LED (signal)
  • Thread size
    M18
  • Material
    thermoplastic housing
  • Order code / Manufacturer SKU
    38269
  • Main function
    Sensor (Ultrasonic)
  • Supply voltage (DC)
    12Vdc-30Vdc (24Vdc nom.)
  • Shape
    Rectangular
  • Degree of protection
    IP67 IP69K NEMA 6P
  • Emission frequency
    230kHz
  • Primary brand
    Banner Engineering

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

T186UE Description

Banner Engineering T186UE is an ultrasonic sensor belonging to the T18U series, designed with a through-beam system or opposed mode. This sensor functions as an emitter alone and is housed in a thermoplastic material. It comes pre-wired with a 6.5ft / 2m cable that terminates with bare end flying leads. The T186UE operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc. It features an M18 threaded mount for installation and can operate within an ambient air temperature range of -40 to +70°C. This sensor is rated with a degree of protection of IP67 NEMA 6P, ensuring its durability in various environmental conditions. It has a rectangular shape and offers a sensing distance between 300mm and 600mm, with a transmission frequency of 230kHz.

Related documents T186UE Specs

T186UE 40124.pdf

Manufacturer warranty

$234.00

Request a quote, and we will send availability within minutes.

Select Qty:

$234.00

$234.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

T18SP6R on Powermatic Associates

T18SP6R

Verified stock: 4

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

Banner

T18SP6RQP on Powermatic Associates

T18SP6RQP

Verified stock: 2

Banner Engineering T18SP6RQP is a photo-electric sensor from the T18 series, designed with a through-beam system or opposed mode. This sensor functions as a receiver alone, housed in a thermoplastic material with a polycarbonate lens. It features a pre-wired connection with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. The sensor operates on a supply voltage of 10Vdc-30Vdc, with nominal values of 12Vdc / 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6RQP offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor) for signaling. The sensing distance of this sensor is 20m, utilizing infrared (IR) light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes. The thread size for mounting is M18.

Banner

T18SN6R W/30 on Powermatic Associates

T18SN6R W/30

Verified stock: 1

Banner Engineering T18SN6R W/30 is a photo-electric sensor designed as part of the T18 series, featuring a through-beam system in an opposed mode configuration. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It comes pre-wired with a 30ft / 9m cable that terminates with bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. This model boasts an IP67, IP69K, and NEMA 6P degree of protection, ensuring durability in various environmental conditions. The T18SN6R W/30 has a cylindrical M18 threaded/barrel shape, includes 1 x digital output (NPN transistor), and offers a sensing distance of up to 20m. It utilizes infrared light with a wavelength of 950 nm and has a response time of 3ms. The operating modes available are Light-ON and Dark-ON, catering to diverse application needs.

Banner

What can I help you find today?

Recommended parts

G10S0000 on Powermatic Associates

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

1

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1