T186UEQP Banner Ultrasonic Sensors

Name: T186UEQP
Brand: Banner
Price: 266 USD
Availability: BackOrder

Part#:T186UEQP

Manufacturer:Banner

Alt. Part#:13148

Product Lifecycle:Active

Get a quick Quote!

T18U Series: Emitter; Range: 300-600 mm; Input: 12-30 V dc; Output: Not Applicable; 15cm (6 in) 4-PIN M12 Pigtail QD

About the manufacturer: Banner is one of the manufacturers that offers Ultrasonic Sensors that you can order at Powermatic Associates site. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the T186UEQP Banner price in the box on the right side or send a quick quote.

Product Details

Weight
68.0388 g
Country Of Origin
MX
Profibus
No
1-wire Serial Interface
No
Wireless
No
SSI
No
RS-485
No
RS-422
No
RS-232
No
PROFINET
No
IO Link
No
Common Ethernet Protocol
No
Application: Ultrasonic
Yes
Feature: Chemical Resistant
No
Feature: Timing (Hold/Delay)
No
Feature: Clear Object Detection
Yes
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Power/Current Consumption (exclusive of load)
50 mA
Ultrasonic Frequency (kHz)
230
Barrel Diameter (mm)
18

Rep Rate (ms)

Normal Resolution Mode: 8; High Resolution Mode: 5

Minimum Response Time (ms)

Min Operating Temperature (°C)

-40

Mechanical Shock (Additional Comments)

MIL-STD-202G, Meth. 213B, conditions H&I (Shock: 75G with unit operation: 100G for non-operation).

IP Rating

IP67

Mechanical Shock

IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave

Max Operating Temperature (°C)

NEMA Rating

NEMA 6P

Vibration

MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).

Max Sensing Distance (mm)

600

Quick Disconnect Type

M12 (Euro)

Number of Pins

Delay at Power-up (ms)

100

Power Supply

12-30 V dc

Minimum Sensing Distance (mm)

300

Primary Housing Material

PBT

Connection

Pigtail QD

Indicator

LED(s)

Device Type

Sensor

Housing Style

Rectangular w/M18 Mount

Sensing Mode (General)

Opposed

Sensing Mode (Detailed)

Emitter

PC Configurable

Cable Length (m)

0.15

Power

Max Measurement Range

>500 mm - <=1000 mm

Sensing Beam

Ultrasonic

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

T186UEQP Description

Banner Engineering T186UEQP is an ultrasonic sensor belonging to the T18U series, designed specifically for emitting purposes. This sensor features a thermoplastic housing and is equipped with a pre-wired 6-inch (150mm) pigtail that terminates with a 4-pin Euro-style M12 connector. It operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc. The T186UEQP is designed for M18 threaded mount installation and can function within an ambient air temperature range of -40 to +70 degrees Celsius. It offers a degree of protection rated at IP67 NEMA 6P, ensuring its durability in various environmental conditions. The sensor has a rectangular shape and provides a sensing distance between 300mm and 600mm, with a transmission frequency of 230kHz.

$266.00

Request a quote, and we will send availability within minutes.

Select Qty:

$266.00

$266.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

T18SP6RQP

Verified stock: 2

Banner Engineering T18SP6RQP is a photo-electric sensor from the T18 series, designed with a through-beam system or opposed mode. This sensor functions as a receiver alone, housed in a thermoplastic material with a polycarbonate lens. It features a pre-wired connection with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. The sensor operates on a supply voltage of 10Vdc-30Vdc, with nominal values of 12Vdc / 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6RQP offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor) for signaling. The sensing distance of this sensor is 20m, utilizing infrared (IR) light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes. The thread size for mounting is M18.

Banner

T18SN6R W/30

Verified stock: 1

Banner Engineering T18SN6R W/30 is a photo-electric sensor designed as part of the T18 series, featuring a through-beam system in an opposed mode configuration. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It comes pre-wired with a 30ft / 9m cable that terminates with bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. This model boasts an IP67, IP69K, and NEMA 6P degree of protection, ensuring durability in various environmental conditions. The T18SN6R W/30 has a cylindrical M18 threaded/barrel shape, includes 1 x digital output (NPN transistor), and offers a sensing distance of up to 20m. It utilizes infrared light with a wavelength of 950 nm and has a response time of 3ms. The operating modes available are Light-ON and Dark-ON, catering to diverse application needs.

Banner

T18-2VPLP-2M

Verified stock: 5

T18-2 Series: Polarized Retroreflective; Range: 6 m; Input: 10-30 V dc; Outputs: complementary PNP; 2 m 4-conductor PVC Cable

Banner

T18SP6R

Verified stock: 4

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

Banner

T186EQP

Verified stock: 2

Banner Engineering T186EQP is a photo-electric sensor from the T18 series, designed as an emitter in a through-beam system or opposed mode. This sensor features a thermoplastic housing with a polycarbonate lens and is pre-wired with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. It operates on a supply voltage of 10Vdc-30Vdc, with nominal voltages of 12Vdc and 24Vdc. The T186EQP can function within an ambient air temperature range of -40 to +70°C and offers a degree of protection rated at IP67, IP69K, and NEMA 6P. Its M18 cylindrical threaded/barrel shape facilitates easy installation, and it has a sensing distance of up to 20 meters. The sensor utilizes infrared light with a wavelength of 950 nm for detection.

Banner