Powermatic Associates Logo

T186E W/30 Banner Electronic Components

T186E W/30 on Powermatic Associates
Banner

Part#:T186E W/30

Manufacturer:Banner

Category:Electronic Components

Product Lifecycle:Active

Product description

Range: 20 m; Input: 10-30V dc

Product Details

  • IO Link
    No
  • DeviceNet
    No
  • Feature: Health/ Marginal Signal Output
    Yes
  • Feature: Chemical Resistant
    Yes
  • Feature: Audible
    No
  • Feature: Hazardous Area
    No
  • Feature: Encapsulated
    Yes
  • Feature: Ecolab Certified
    Yes
  • Feature: Timing (Hold/Delay)
    No
  • Feature: Washdown Rated
    Yes
  • Opposed Mode Emitter/Receiver
    Emitter
  • Indicator
    LEDs
  • Barrel Diameter (mm)
    18
  • Lens Material
    Polycarbonate
  • Adjustments
    N/A
  • Max Op. Relative Humidity [%]
    90% @ 50°C
  • Repeatability (µs)
    375
  • NEMA Rating
    NEMA 6P
  • IP Rating
    IP67, IP69
  • Number of Pins
    2
  • Special Feature: Water Detection
    No
  • Delay at Power-up (ms)
    100
  • Min Op. Temp. (°C)
    -40
  • Special Feature: Remote Teach
    No
  • Operation
    N/A
  • Output response time (ms)
    N/A
  • Power Supply/Supply Voltage
    10-30 V dc
  • Special Feature: Intrinsically Safe
    No
  • Max Op. Temp. (°C)
    70
  • Connection
    Cable
  • Quick Disconnect Type
    No QD
  • Power
    DC
  • Housing Style
    Barrel
  • Primary Housing Material
    Thermoplastic
  • Outputs
    N/A
  • Max Sensing Distance (mm)
    20000
  • Sensing Mode (Detailed)
    Emitter
  • Sensing Mode (General)
    Opposed
  • Sensing Beam
    Infrared LED
  • Cable Length (m)
    9

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

T186E W/30 Related Documents

T18 Series Sensors (DC Voltage) -- Datasheet-1630949521521.pdf

Similar products from: Banner Electronic Components

T18SP6R on Powermatic Associates

T18SP6R

Banner

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

4 in stock
FIC-M12M4 on Powermatic Associates

FIC-M12M4

Banner

Banner Engineering FIC-M12M4 is a field-wireable connector designed for automation applications, featuring a 4-pin Euro-style M12 male connection type.

2 in stock
WLAW360X180DQ on Powermatic Associates

WLAW360X180DQ

Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for 1-color Cool White (W) LED illumination. It operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc. The dimensions of this task light are L180mm x W360mm, featuring an acrylic diffused window and PBT housing. It comes pre-equipped with a 4-pin M12 Euro-style QD connector for connectivity. The rectangular-shaped light offers a degree of protection rated at IP67 and IP69K, suitable for surface or wall mounting. It can operate in ambient air temperatures ranging from -20°C to +50°C and includes 1 x digital input (12Vdc / 24Vdc) for color control.

4 in stock
T18SN6R W/30 on Powermatic Associates

T18SN6R W/30

Banner

Banner Engineering T18SN6R W/30 is a photo-electric sensor designed as part of the T18 series, featuring a through-beam system in an opposed mode configuration. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It comes pre-wired with a 30ft / 9m cable that terminates with bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. This model boasts an IP67, IP69K, and NEMA 6P degree of protection, ensuring durability in various environmental conditions. The T18SN6R W/30 has a cylindrical M18 threaded/barrel shape, includes 1 x digital output (NPN transistor), and offers a sensing distance of up to 20m. It utilizes infrared light with a wavelength of 950 nm and has a response time of 3ms. The operating modes available are Light-ON and Dark-ON, catering to diverse application needs.

1 in stock

Manufacturer warranty

T186E W/30 Banner

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare T186E W/30 with other Electronic Components products

IO Link

DeviceNet

Feature: Health/ Marginal...

Feature: Chemical Resista...

Feature: Audible

Feature: Hazardous Area

Feature: Encapsulated

Feature: Ecolab Certified

Feature: Timing (Hold/Del...

Feature: Washdown Rated

Selected product

T186E W/30
Backordered
T186E W/30
Banner

Range: 20 m; Input: 10-30V dc

IO LinkNo

DeviceNetNo

Feature: Health/ Marginal Signal OutputYes

Feature: Chemical ResistantYes

Feature: AudibleNo

Feature: Hazardous AreaNo

Feature: EncapsulatedYes

Feature: Ecolab CertifiedYes

Feature: Timing (Hold/Delay)No

Feature: Washdown RatedYes

T18SN6R W/30
1 in stock
T18SN6R W/30
Banner

Banner Engineering T18SN6R W/30 is a photo-electric sensor designed as part of the T18 series, featu...

IO Link-

DeviceNet-

Feature: Health/ Marginal Signal Output-

Feature: Chemical Resistant-

Feature: Audible-

Feature: Hazardous Area-

Feature: Encapsulated-

Feature: Ecolab Certified-

Feature: Timing (Hold/Delay)-

Feature: Washdown Rated-

T18SP6R
4 in stock
T18SP6R
Banner

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications,...

IO Link-

DeviceNet-

Feature: Health/ Marginal Signal Output-

Feature: Chemical Resistant-

Feature: Audible-

Feature: Hazardous Area-

Feature: Encapsulated-

Feature: Ecolab Certified-

Feature: Timing (Hold/Delay)-

Feature: Washdown Rated-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

MDI4MRQ34B2-EQ on Powermatic Associates

MDI4MRQ34B2-EQ

Novanta IMS

Novanta IMS MDI4MRQ34B2-EQ is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase AC stepper motor design. It is equipped with an external single-end 512-line optical encoder and a double (2) motor stack, Plus 2 version for expanded features. The connection is facilitated through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a 240Vac supply voltage and is designed for mounting with an 85x85mm flange. It can operate in ambient air temperatures ranging from 0 to +85°C and has a degree of protection rated at IP65. The moment of inertia is specified at 1.6kg.cm2, with a stall torque of 353N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

T186EQ on Powermatic Associates

T186EQ

Verified stock: 0

Banner Engineering T186EQ is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as an emitter alone, housed in a thermoplastic body with a polycarbonate lens. It features a pre-equipped 4-pin Euro-style M12 connector for connectivity. The T186EQ operates on a supply voltage range of 10Vdc to 30Vdc, with nominal voltages of 12Vdc and 24Vdc. It is designed to function within an ambient air temperature range of -40 to +70°C. This sensor offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The T186EQ has a sensing distance of 20 meters and utilizes infrared light with a wavelength of 950 nm for detection. The thread size for mounting is M18.

Banner

FAQ

Out if stock but available for backorder.

Range: 20 m; Input: 10-30V dc

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock
T186E W/30 Banner - Electronic Components | Powermatic Associates