Powermatic logo

S186ELD

Banner

Product Lifecycle: Active

Banner Engineering S186ELD is a Class 1 laser photo-electric sensor designed for through-beam system applications, part of the S186ELD series. It features a thermoplastic housing with a polycarbonate lens and is equipped with a pre-wired 6.5ft / 2m cable that terminates with bare end flying leads. This sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal voltages of 12Vdc and 24Vdc. It is designed to function within an ambient air temperature range of -40 to +70°C. The S186ELD offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor emits a visible red light with a wavelength of 650 nm and has an M18 thread size for mounting.

S186ELD

Banner Engineering S186ELD is a Class 1 laser photo-electric sensor designed for through-beam system applications, part of the S186ELD series. It features a thermoplastic housing with a polycarbonate lens and is equipped with a pre-wired 6.5ft / 2m cable that terminates with bare end flying leads. This sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal voltages of 12Vdc and 24Vdc. It is designed to function within an ambient air temperature range of -40 to +70°C. The S186ELD offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor emits a visible red light with a wavelength of 650 nm and has an M18 thread size for mounting.

S18 Series Sensors (DC Voltage) Install Guide.pdf
S18 Series Laser Emitters.pdf
S186ELD CABLE/PIGTAIL.stp
S186ELD CABLE/PIGTAIL.pdf

Product details

S18 Series Sensors (DC Voltage) Install Guide.pdf
S18 Series Laser Emitters.pdf
S186ELD CABLE/PIGTAIL.stp
S186ELD CABLE/PIGTAIL.pdf
  • IO LinkNo
  • DeviceNetNo
  • Feature: AudibleNo
  • Feature: Hazardous AreaNo
  • Feature: Ecolab CertifiedYes
  • Feature: Timing (Hold/Delay)No
  • Opposed Mode Emitter/ReceiverEmitter
  • Feature: Washdown RatedYes
  • Feature: EncapsulatedNo
  • Feature: Chemical ResistantNo
  • IndicatorLEDs
  • AdjustmentsN/A
  • Barrel Diameter (mm)18
  • Max Op. Relative Humidity [%]90% @ 50°C
  • NEMA RatingNEMA 6P
  • IP RatingIP67, IP69
  • Number of Pins2
  • Special Feature: Water DetectionNo
  • Repeatability (µs)375
  • Lens MaterialPolycarbonate
  • Special Feature: Remote TeachNo
  • Delay at Power-up (ms)100
  • Special Feature: Intrinsically SafeNo
  • Min Op. Temp. (°C)-40
  • Max Op. Temp. (°C)70
  • Output response time (ms)N/A
  • Power Supply/Supply Voltage10-30 V dc
  • OutputsN/A
  • Max Sensing Distance (mm)15000
  • ConnectionCable
  • OperationN/A
  • Quick Disconnect TypeNo QD
  • Housing StyleBarrel
  • Primary Housing MaterialThermoplastic
  • PowerDC
  • Cable Length (m)2
  • Sensing Mode (Detailed)Laser Emitter
  • Sensing Mode (General)Opposed
  • Laser ClassificationClass 1
  • Sensing BeamVisible Red Laser
  • Small Visible SpotLaser

Get a quick quote

Select Qty:

Average response time:

11 minutes

This part can ship within 24h!

Fast worldwide Shipping and Delivery

Shipping cost will be calculated during checkout

Payments methods

Secure Payment Processing
with money back guarantee

1 year warranty on all parts

Responsive Customer Support
with personalized assistance

Need more details?

Feel free to chat with us.

Relevant products

This item can ship within 24h!

S18SP6FF100Q

S18SP6FF100Q

Banner Engineering S18SP6FF100Q is a fixed-field photo-electric sensor from the S18 DC series, designed with a background suppression system. This sensor features a thermoplastic housing with an acrylic lens and is pre-equipped with a 4-pin Euro-style M12 connector for connectivity. It operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc, and can function within an ambient air temperature range of -40 to +70°C. The S18SP6FF100Q offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (PNP transistor; complementary NO/NC) and has a sensing distance of 100mm. It utilizes infrared light with a wavelength of 880 nm and boasts a quick response time of 3ms (0.003 s). The operating modes available are Light-ON and Dark-ON, catering to diverse application needs.

BannerSTOCK: 16

This item can ship within 24h!

S18SN6LPQ

S18SN6LPQ

Banner Engineering S18SN6LPQ is a polarized photo-electric sensor from the S18 DC series, designed in a retro-reflective mode. This sensor features a thermoplastic housing with an acrylic lens and is pre-equipped with a 4-pin Euro-style M12 connector. It operates on a supply voltage of 10Vdc-30Vdc, with nominal values of 12Vdc and 24Vdc, and can function within an ambient air temperature range of -40 to +70°C. The S18SN6LPQ offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (NPN transistor; complementary NO/NC) and has a sensing distance of 2m. It emits visible red light with a wavelength of 680 nm and features a quick response time of 3ms. Additionally, it supports both Light-ON and Dark-ON operating modes.

BannerSTOCK: 2

This item can ship within 24h!

S183E

S183E

Banner Engineering S183E is a photo-electric sensor from the S18 AC series, designed as an emitter in a through-beam system or opposed mode configuration. This sensor features a thermoplastic housing with a polycarbonate lens and is pre-wired with a 6.5ft / 2m cable that terminates with bare end flying leads. It operates on a supply voltage ranging from 20Vac to 250Vac, with nominal voltages of 200Vac, 220Vac, and 240Vac. The S183E can function within an ambient air temperature range of -40 to +70°C and offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation, and it has a sensing distance of 20m. The sensor utilizes infrared light with a wavelength of 950 nm for detection, and it has an M18 thread size for mounting.

BannerSTOCK: 2

This item can ship within 24h!

S18RW3R

S18RW3R

Banner Engineering S18RW3R is a photo-electric sensor designed for through-beam system applications, part of the S18 AC series. This sensor functions as a receiver alone, housed in a thermoplastic body with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 20Vac-250Vac, with nominal values at 200Vac, 220Vac, and 240Vac. It is designed to work within an ambient air temperature range of -40 to +70°C. The S18RW3R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (Solid-state AC output; SPST contact type) and has a sensing distance of up to 20m. It operates with infrared light at a wavelength of 950 nm and has a response time of 16ms (0.016 s). The operating mode is Dark-ON, making it suitable for applications where detection is required in the absence of the light beam.

BannerSTOCK: 1
Friendly Powermatic robot

What can I help you find today?