Powermatic Associates Logo

MQD9-415RA Banner Cordsets

MQD9-415RA on Powermatic Associates
Banner

Part#:MQD9-415RA

Manufacturer:Banner

Alt. Part#:35618

Product Lifecycle:Active

Get a quick Quote!

Cordset: Single Ended M12; 4-pin Right-Angle Female; 5 m (16.4 ft) 2x20 PVC Blue; Nickel-Plated Brass Coupling Nut

About the manufacturer: Banner is one of the manufacturers that offers Cordsets that you can order at Powermatic Associates site. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the MQD9-415RA Banner price in the box on the right side or send a quick quote.

Product Details

  • Weight
    182.343984 g
  • Country Of Origin
    US
  • Feature: Hazardous Area
    Yes
  • Oil/Grease Resistant
    No
  • Primary Orientation
    Right Angle
  • Primary Number of Conductors
    2
  • Primary Gender
    Female
  • Secondary Connector Type
    Flying Leads
  • Primary AWG
    20
  • Primary Coupling Method
    M12 Single Key
  • Primary Connector Type
    EURO
  • IP Rating
    IP67
  • Voltage Rating (V)
    250 V ac/dc
  • Minimum Temp. (°C)
    -40
  • Maximum Temp. (°C)
    105
  • Current Rating (A)
    4.0
  • Cable Jacket Color
    Blue
  • Cordset Length (m)
    4.57
  • Connector Body Material/Color
    PUR Black
  • Outside Cable Diameter (mm)
    5.2
  • Shield/No Shield
    No Shield
  • Trunk Length (m)
    No Trunk
  • Number of Connectors
    1
  • Coupling Material/Color
    Nickel Plated Brass
  • Number of Contacts
    5
  • Cable Jacket Material
    PVC

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

MQD9-415RA Description

Banner Engineering MQD9-415RA is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 5.2mm diameter PVC cable and a 5-pin Euro-style M12 female angled connector with bare end flying leads. The connection is secured with a chrome-plated brass coupling nut. This cable operates effectively within an ambient air temperature range of -40 to +105°C and offers a degree of protection rated at IP67, making it suitable for challenging environments. The blue sheathing enhances visibility and identification in complex setups. With a length of 15ft (5m) and a rated voltage of 250Vac, this cable is tailored for reliable connectivity in a wide range of industrial applications.

Manufacturer warranty

$60.00

Request a quote, and we will send availability within minutes.

Select Qty:

$60.00

$60.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17