Pilz Logic Controllers & Displays on Powermatic Associates
Pilz
Subcategories (2)
Pilz
Pilz PILZ-328061 is a communications unit designed for PROFINET communication with a Manufacturer ID of 092Fh and PNO certification. It features potential isolation for supply voltage for module supply and periphery supply, module supply, periphery supply, and between module supply and PROFINET, all with functional insulation and rated surge voltages of 2500V, except for PROFINET which has a rated surge voltage of 1500V. This unit is suitable for DIN rail mounting and operates within an ambient air temperature range of 0 to +60°C. It has a net height of 110.1 mm, incorporates a microSD device with code C007h, and is designed as a shared device standard/safety unit. The rated current is 8A for peripheral supply, and it utilizes an RJ45 connector plug-in/detachable spring-loaded terminal connections. Classified under the sub-range name "Communication module," it has an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc (24Vdc nominal; for both module and peripheral supply). The housing is made of PPE material, with a net width of 64.1 mm and a net depth of 94.7 mm. It supports the PROFINET IO PROFIsafe communication protocol and has a memory capacity of 1.44Byte for input and output devices. The unit can accommodate wire cross-sections of 0.15 to 1.5mm2 / 26AWG to 14AWG conductors. The ambient air temperature for storage ranges from -40 to +70°C. Rated power specifications include 28.8W for the output of the external power supply at supply voltage, 5W at no load, 22W for maximum output power, and 192W for the output of the external power supply with 0.5W at no load. It has a buffer time of 20ms / 0.02 s for supply voltage, a transmission rate of 100MBit/s with automatic selection, and processing times of 1-512 ms for cycle time RT and 1-16 ms for cycle time IRT.
Quick Quote
Pilz PILZ-772032 is a communications unit designed as an expansion/communication module with DeviceNet fieldbus interface, suitable for peripheral device types. It supports station addresses ranging from 0 to 63d and features potential isolation between the fieldbus and module voltage with functional insulation, rated at a surge voltage of 500V. This unit is designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 110 mm. Connection is facilitated through a 5-pin plug-in connector, offering plug-in/detachable screw or spring-loaded terminal connections, accommodating 2 points per spring-loaded connection with a 9mm stripping length. It falls under the communication module sub-range, with a degree of protection rated at IP20 and a supply voltage requirement of 19.2-30Vdc (24Vdc nominal). The housing is made of PC material. The communication protocol supported is DeviceNet, with wire cross-sections ranging from 0.25 to 2.5mm2 for various connection types. Power consumption is rated at 1.5 W for module supply and 0.75 W for DeviceNet. It can operate in ambient air temperatures for storage between -25 and +70°C. Protection functions include galvanic isolation and potential isolation, with a rated insulation voltage (Ui) of 30 V. The unit supports transmission rates of 125kBit/s, 250kBit/s, and 500kBit/s on DeviceNet, with a time delay of 20ms for supply interruption before de-energization.
Quick Quote
Pilz PILZ-772031 is a communications unit designed as an expansion/communication module with a PROFIBUS-DP fieldbus interface. It functions as a peripheral DPV0 device type with a station address range of 0-99d and features potential isolation between the fieldbus and module voltage, ensuring functional insulation with a rated surge voltage of 500V. This unit is suitable for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C. It has a net height of 100 mm and utilizes a 9-pin D-sub female connector plug-in/detachable screw or spring-loaded terminal connections, supporting 2 points per spring-loaded connection with a 9mm stripping length. Classified under the sub-range name of Communication module, it measures 27mm in width, has an IP20 degree of protection, and requires a supply voltage of 19.2-30Vdc (24Vdc nominal). The housing is made from PC material, and the unit's width is 22.5 mm. It communicates via the PROFIBUS DP protocol and accommodates wire cross-sections ranging from 0.25 to 2.5mm2 / 24AWG to 12AWG for 1-core flexible with screw connection, 0.2 to 1.5mm2 / 24AWG to 16AWG for 2-core with the same cross-section, flexible without crimp connectors or with TWIN crimp connectors; screw connection, and 0.2 to 2.5mm2 / 24AWG to 12AWG for spring connection. The power consumption of the module supply is 1.5 W, with a net depth of 115 mm. It can be stored in ambient air temperatures ranging from -25 to +70°C. The unit includes protection functions such as galvanic isolation and potential isolation, with a rated insulation voltage (Ui) of 30 V. It supports a speed range of 9.6kBit/s to 12MBit/s for transmission rates over PROFIBUS/DP and has a time delay of 20ms for supply interruption before de-energization.
Quick Quote
Pilz PILZ-773711 is a communications unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. This expansion and communication module features an EtherCAT fieldbus interface, enabling it to serve as a peripheral device with capabilities for logging CANopen over EtherCAT. It is equipped with a test voltage of 500Vac for the EtherCAT fieldbus interface. The unit operates within an ambient air temperature range of 0 to +60°C and has a net height of 94 mm. It is designed for connection to a base unit and utilizes an RJ45 connector for its connection type. As part of the Communication module sub-range, it measures 27mm in width, offers an IP20 degree of protection, and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 4.9-5.1Vdc (5Vdc nominal; module supply via base unit). The housing is made of PPO for the bottom and ABS for the front, ensuring compatibility with the rated voltage of 500Vac (EtherCAT test voltage). The unit's width is 22.5 mm, and it supports the EtherCAT communication protocol with a power consumption of 1.6 W (from supply via base unit). The depth is 114 mm, and it can be stored in temperatures ranging from -25 to +70°C. It features galvanic isolation for protection, with a rated insulation voltage (Ui) of 30 V, a transmission rate speed of 100MBit/s for EtherCAT, and a time delay of 20ms for supply interruption before de-energization.
Quick Quote
Pilz PILZ-772034 is a communications unit designed as an expansion/communication module with a CC-Link V1.10 fieldbus interface. It functions as a peripheral device type with a station address range of 1-63d and supports up to 2 assigned stations. The unit is tested for a voltage of 500Vac, ensuring functional insulation with a rated surge voltage of 500V for potential isolation between the fieldbus and module voltage. It is suitable for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates efficiently within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection in the control cabinet. The unit has a net height of 100 mm and employs a 5-pin plug-in connector for plug-in/detachable screw or spring-loaded terminal connections, accommodating 2 points per spring-loaded connection with a 9mm stripping length. As part of the communication module sub-range, it measures 27mm in width, offers an IP20 degree of protection, and requires a supply voltage of 19.2-30Vdc (24Vdc nominal). The housing is made of PC material, and the unit's width is 22.5 mm. It supports the CC-Link communication protocol and allows for a variety of wire cross-sections and connection types, including flexible and rigid cores. The power consumption of the module supply is 1.5 W, with a net depth of 110 mm. It can be stored in ambient air temperatures ranging from -25 to +70°C and features protection functions such as galvanic isolation and potential isolation. The rated insulation voltage (Ui) is 30 V, and it supports transmission rates of 156kBit/s, 625kBit/s, 10MBit/s, 2.5MBit/s, and 5MBit/s (CC-Link), with a time delay of 20ms for supply interruption before de-energization.
Quick Quote
Pilz PILZ-772181 is a Safety I/O unit designed as a configurable safety small digital input expansion unit with a comprehensive range of monitoring functions. These include Safe Speed Monitoring (SSM), Safe Speed Range Monitoring (SSR-M), Safe Direction of Movement Monitoring (SDI-M), Safe Operating Stop Monitoring (SOS-M), Safe Stop 1 Monitoring (SS1-M), Safe Stop 2 Monitoring (SS2-M), Safely Limited Acceleration Monitoring (SLA-M), and Safely Limited Acceleration Range Monitoring (SAR-M). It features potential isolation between sensor and system voltage with functional insulation, rated insulation voltage at 30V, and rated surge voltage at 2500V. The same potential isolation specifications apply between sensor 1 and sensor 2. Designed for DIN rail mounting, it supports both 35mmx7.5mm top hat and 27mm recess width rails. The unit operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection in the control cabinet. It has a net height of 101.4 mm, a net width of 22.5 mm, and a net depth of 111 mm. Connection types include plug-in/detachable screw or spring-loaded terminals, and an 8-pin mini-IO female connector for incremental encoder input, accommodating a wide range of wire sizes. The module is IP20 rated, requires a 24Vdc supply voltage from the base unit, and supports a frequency range for input and monitoring without hysteresis. The housing is made from PC material. Power consumption is 3.5 W from the supply via the base module, with a maximum power dissipation/loss of 3.9 W. It has a storage ambient air temperature range of -25 to +70°C and includes protection functions such as short-circuit proof, overload proof, and potential isolation. The response time after a limit value is exceeded is calculated as 1/f_ist + 0.016 s. The unit has two digital inputs for proximity switches, with specific signal level requirements for "1" and "0" states, and a current consumption of 150mA from the supply via the base module.
Quick Quote
Pilz PILZ-772036 is a safety controller that functions as a configurable safety base unit or safe small controller. It supports various loads including inductive, capacitive, and resistive with potential isolation between SC output and system voltage featuring basic insulation and a rated insulation voltage of 30V, as well as a rated surge voltage of 2500V. Designed for DIN rail mounting, it accommodates rails of 35mmx7.5mm (top hat) and 27mm (recess width). The unit operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C. It has a net height of 101.4 mm and is expandable (device code 0060h). The rated current specifications include 1.6A for maximum external system supply continuous current, 3A for external supply inrush current, and 8A for maximum external output supply continuous current, with input and output current ranges specified. Connection types include plug-in/detachable screw or spring-loaded terminals. The base unit has an IP20 degree of protection and requires a supply voltage of 19.2-30Vdc. It is housed in PC material, supports up to 1000m cable length per input and 2000m overall cable for test pulse output, and measures 45 mm in width. The cross-section compatibility ranges for wiring, and it has a power consumption of 0.8 W with a net depth of 120 mm. Suitable for storage in temperatures ranging from -25 to +70°C, it features 8 digital outputs for configurable auxiliary outputs, 4 for test pulse outputs, and 4 for 1-pole positive-switching semiconductor outputs. It includes protection functions against short-circuit and potential isolation, with a response time of 0.5 s for simultaneity in the 2-hand circuit. The unit also offers 8 digital inputs for configurable inputs and 12 for standard inputs, with a current consumption of 32mA from the supply. Time delays for input pulse suppression, maximum input delay, and switch-off semiconductor output delay are specified, alongside power dissipation/losses, processing times, and a voltage drop for the semiconductor output.
Quick Quote
Pilz PILZ-772030 is a communications unit designed for expansion and communication purposes, featuring a single serial interface. It is intended for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 120 mm. Connection is facilitated through plug-in/detachable screw or spring-loaded terminals, supporting 2 points per spring-loaded connection with a 9mm stripping length. As part of the Communication module sub-range, it offers an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 3.23-3.37Vdc (3.3Vdc nominal) supplied via the base unit. The housing is made from PC material. The communication protocol supported is RS-232. It accommodates a wire cross-section of 0.25 to 2.5mm2 / 24AWG to 12AWG for 1-core flexible with screw connection, 0.2 to 1.5mm2 / 24AWG to 16AWG for 2-core with the same cross-section, flexible without crimp connectors or with TWIN crimp connectors for screw connection, and 0.2 to 2.5mm2 / 24AWG to 12AWG for spring connection. The power consumption from the supply via the base unit is 0.03 W. The unit is designed for storage in ambient air temperatures ranging from -25 to +70°C and has a rated insulation voltage (Ui) of 30 V.
Quick Quote
Pilz PILZ-266815 is a connector designed for supp. voltage connection, featuring a 3-pin connector configuration. This part is specifically manufactured by Pilz to facilitate electrical connections in automation systems.
Quick Quote
Pilz PILZ-266707 is an HMI diagnostic and operating panel designed for industrial applications. It operates within an ambient air temperature range of 0 to +50 °C and features a net height of 193.8 mm, a net width of 143.8 mm, and a net depth of 54.3 mm. This unit runs on Windows 10 IOT and supports multiple connection types, including 2 x RJ45 connectors for 1GBit/s Ethernet, 1 x USB host 3.0, 2 x USB hosts 2.0, 1 x HDMI port, and 1 x VGA port. It requires a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and has a power consumption of 23 W. The communication protocol is Ethernet, and it comes with a memory capacity of 4GB RAM and a 32GB SSD.
Quick Quote
| Item | Manufacturer | Price | Stock | Delivery | |
|---|---|---|---|---|---|
| PILZ-328061 Pilz PILZ-328061 is a communications unit designed for PROFINET communication with a Manufacturer ID of 092Fh and PNO certification. It features potential isolation for supply voltage for module supply and periphery supply, module supply, periphery supply, and between module supply and PROFINET, all with functional insulation and rated surge voltages of 2500V, except for PROFINET which has a rated surge voltage of 1500V. This unit is suitable for DIN rail mounting and operates within an ambient air temperature range of 0 to +60°C. It has a net height of 110.1 mm, incorporates a microSD device with code C007h, and is designed as a shared device standard/safety unit. The rated current is 8A for peripheral supply, and it utilizes an RJ45 connector plug-in/detachable spring-loaded terminal connections. Classified under the sub-range name "Communication module," it has an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc (24Vdc nominal; for both module and peripheral supply). The housing is made of PPE material, with a net width of 64.1 mm and a net depth of 94.7 mm. It supports the PROFINET IO PROFIsafe communication protocol and has a memory capacity of 1.44Byte for input and output devices. The unit can accommodate wire cross-sections of 0.15 to 1.5mm2 / 26AWG to 14AWG conductors. The ambient air temperature for storage ranges from -40 to +70°C. Rated power specifications include 28.8W for the output of the external power supply at supply voltage, 5W at no load, 22W for maximum output power, and 192W for the output of the external power supply with 0.5W at no load. It has a buffer time of 20ms / 0.02 s for supply voltage, a transmission rate of 100MBit/s with automatic selection, and processing times of 1-512 ms for cycle time RT and 1-16 ms for cycle time IRT. | Pilz | Quick Quote | ||
| PILZ-772032 Pilz PILZ-772032 is a communications unit designed as an expansion/communication module with DeviceNet fieldbus interface, suitable for peripheral device types. It supports station addresses ranging from 0 to 63d and features potential isolation between the fieldbus and module voltage with functional insulation, rated at a surge voltage of 500V. This unit is designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 110 mm. Connection is facilitated through a 5-pin plug-in connector, offering plug-in/detachable screw or spring-loaded terminal connections, accommodating 2 points per spring-loaded connection with a 9mm stripping length. It falls under the communication module sub-range, with a degree of protection rated at IP20 and a supply voltage requirement of 19.2-30Vdc (24Vdc nominal). The housing is made of PC material. The communication protocol supported is DeviceNet, with wire cross-sections ranging from 0.25 to 2.5mm2 for various connection types. Power consumption is rated at 1.5 W for module supply and 0.75 W for DeviceNet. It can operate in ambient air temperatures for storage between -25 and +70°C. Protection functions include galvanic isolation and potential isolation, with a rated insulation voltage (Ui) of 30 V. The unit supports transmission rates of 125kBit/s, 250kBit/s, and 500kBit/s on DeviceNet, with a time delay of 20ms for supply interruption before de-energization. | Pilz | Quick Quote | ||
| PILZ-772031 Pilz PILZ-772031 is a communications unit designed as an expansion/communication module with a PROFIBUS-DP fieldbus interface. It functions as a peripheral DPV0 device type with a station address range of 0-99d and features potential isolation between the fieldbus and module voltage, ensuring functional insulation with a rated surge voltage of 500V. This unit is suitable for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C. It has a net height of 100 mm and utilizes a 9-pin D-sub female connector plug-in/detachable screw or spring-loaded terminal connections, supporting 2 points per spring-loaded connection with a 9mm stripping length. Classified under the sub-range name of Communication module, it measures 27mm in width, has an IP20 degree of protection, and requires a supply voltage of 19.2-30Vdc (24Vdc nominal). The housing is made from PC material, and the unit's width is 22.5 mm. It communicates via the PROFIBUS DP protocol and accommodates wire cross-sections ranging from 0.25 to 2.5mm2 / 24AWG to 12AWG for 1-core flexible with screw connection, 0.2 to 1.5mm2 / 24AWG to 16AWG for 2-core with the same cross-section, flexible without crimp connectors or with TWIN crimp connectors; screw connection, and 0.2 to 2.5mm2 / 24AWG to 12AWG for spring connection. The power consumption of the module supply is 1.5 W, with a net depth of 115 mm. It can be stored in ambient air temperatures ranging from -25 to +70°C. The unit includes protection functions such as galvanic isolation and potential isolation, with a rated insulation voltage (Ui) of 30 V. It supports a speed range of 9.6kBit/s to 12MBit/s for transmission rates over PROFIBUS/DP and has a time delay of 20ms for supply interruption before de-energization. | Pilz | Quick Quote | ||
| PILZ-773711 Pilz PILZ-773711 is a communications unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. This expansion and communication module features an EtherCAT fieldbus interface, enabling it to serve as a peripheral device with capabilities for logging CANopen over EtherCAT. It is equipped with a test voltage of 500Vac for the EtherCAT fieldbus interface. The unit operates within an ambient air temperature range of 0 to +60°C and has a net height of 94 mm. It is designed for connection to a base unit and utilizes an RJ45 connector for its connection type. As part of the Communication module sub-range, it measures 27mm in width, offers an IP20 degree of protection, and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 4.9-5.1Vdc (5Vdc nominal; module supply via base unit). The housing is made of PPO for the bottom and ABS for the front, ensuring compatibility with the rated voltage of 500Vac (EtherCAT test voltage). The unit's width is 22.5 mm, and it supports the EtherCAT communication protocol with a power consumption of 1.6 W (from supply via base unit). The depth is 114 mm, and it can be stored in temperatures ranging from -25 to +70°C. It features galvanic isolation for protection, with a rated insulation voltage (Ui) of 30 V, a transmission rate speed of 100MBit/s for EtherCAT, and a time delay of 20ms for supply interruption before de-energization. | Pilz | Quick Quote | ||
| PILZ-772034 Pilz PILZ-772034 is a communications unit designed as an expansion/communication module with a CC-Link V1.10 fieldbus interface. It functions as a peripheral device type with a station address range of 1-63d and supports up to 2 assigned stations. The unit is tested for a voltage of 500Vac, ensuring functional insulation with a rated surge voltage of 500V for potential isolation between the fieldbus and module voltage. It is suitable for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates efficiently within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection in the control cabinet. The unit has a net height of 100 mm and employs a 5-pin plug-in connector for plug-in/detachable screw or spring-loaded terminal connections, accommodating 2 points per spring-loaded connection with a 9mm stripping length. As part of the communication module sub-range, it measures 27mm in width, offers an IP20 degree of protection, and requires a supply voltage of 19.2-30Vdc (24Vdc nominal). The housing is made of PC material, and the unit's width is 22.5 mm. It supports the CC-Link communication protocol and allows for a variety of wire cross-sections and connection types, including flexible and rigid cores. The power consumption of the module supply is 1.5 W, with a net depth of 110 mm. It can be stored in ambient air temperatures ranging from -25 to +70°C and features protection functions such as galvanic isolation and potential isolation. The rated insulation voltage (Ui) is 30 V, and it supports transmission rates of 156kBit/s, 625kBit/s, 10MBit/s, 2.5MBit/s, and 5MBit/s (CC-Link), with a time delay of 20ms for supply interruption before de-energization. | Pilz | Quick Quote | ||
| PILZ-772181 Pilz PILZ-772181 is a Safety I/O unit designed as a configurable safety small digital input expansion unit with a comprehensive range of monitoring functions. These include Safe Speed Monitoring (SSM), Safe Speed Range Monitoring (SSR-M), Safe Direction of Movement Monitoring (SDI-M), Safe Operating Stop Monitoring (SOS-M), Safe Stop 1 Monitoring (SS1-M), Safe Stop 2 Monitoring (SS2-M), Safely Limited Acceleration Monitoring (SLA-M), and Safely Limited Acceleration Range Monitoring (SAR-M). It features potential isolation between sensor and system voltage with functional insulation, rated insulation voltage at 30V, and rated surge voltage at 2500V. The same potential isolation specifications apply between sensor 1 and sensor 2. Designed for DIN rail mounting, it supports both 35mmx7.5mm top hat and 27mm recess width rails. The unit operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection in the control cabinet. It has a net height of 101.4 mm, a net width of 22.5 mm, and a net depth of 111 mm. Connection types include plug-in/detachable screw or spring-loaded terminals, and an 8-pin mini-IO female connector for incremental encoder input, accommodating a wide range of wire sizes. The module is IP20 rated, requires a 24Vdc supply voltage from the base unit, and supports a frequency range for input and monitoring without hysteresis. The housing is made from PC material. Power consumption is 3.5 W from the supply via the base module, with a maximum power dissipation/loss of 3.9 W. It has a storage ambient air temperature range of -25 to +70°C and includes protection functions such as short-circuit proof, overload proof, and potential isolation. The response time after a limit value is exceeded is calculated as 1/f_ist + 0.016 s. The unit has two digital inputs for proximity switches, with specific signal level requirements for "1" and "0" states, and a current consumption of 150mA from the supply via the base module. | Pilz | Quick Quote | ||
| PILZ-772036 Pilz PILZ-772036 is a safety controller that functions as a configurable safety base unit or safe small controller. It supports various loads including inductive, capacitive, and resistive with potential isolation between SC output and system voltage featuring basic insulation and a rated insulation voltage of 30V, as well as a rated surge voltage of 2500V. Designed for DIN rail mounting, it accommodates rails of 35mmx7.5mm (top hat) and 27mm (recess width). The unit operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C. It has a net height of 101.4 mm and is expandable (device code 0060h). The rated current specifications include 1.6A for maximum external system supply continuous current, 3A for external supply inrush current, and 8A for maximum external output supply continuous current, with input and output current ranges specified. Connection types include plug-in/detachable screw or spring-loaded terminals. The base unit has an IP20 degree of protection and requires a supply voltage of 19.2-30Vdc. It is housed in PC material, supports up to 1000m cable length per input and 2000m overall cable for test pulse output, and measures 45 mm in width. The cross-section compatibility ranges for wiring, and it has a power consumption of 0.8 W with a net depth of 120 mm. Suitable for storage in temperatures ranging from -25 to +70°C, it features 8 digital outputs for configurable auxiliary outputs, 4 for test pulse outputs, and 4 for 1-pole positive-switching semiconductor outputs. It includes protection functions against short-circuit and potential isolation, with a response time of 0.5 s for simultaneity in the 2-hand circuit. The unit also offers 8 digital inputs for configurable inputs and 12 for standard inputs, with a current consumption of 32mA from the supply. Time delays for input pulse suppression, maximum input delay, and switch-off semiconductor output delay are specified, alongside power dissipation/losses, processing times, and a voltage drop for the semiconductor output. | Pilz | Quick Quote | ||
| PILZ-772030 Pilz PILZ-772030 is a communications unit designed for expansion and communication purposes, featuring a single serial interface. It is intended for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 120 mm. Connection is facilitated through plug-in/detachable screw or spring-loaded terminals, supporting 2 points per spring-loaded connection with a 9mm stripping length. As part of the Communication module sub-range, it offers an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 3.23-3.37Vdc (3.3Vdc nominal) supplied via the base unit. The housing is made from PC material. The communication protocol supported is RS-232. It accommodates a wire cross-section of 0.25 to 2.5mm2 / 24AWG to 12AWG for 1-core flexible with screw connection, 0.2 to 1.5mm2 / 24AWG to 16AWG for 2-core with the same cross-section, flexible without crimp connectors or with TWIN crimp connectors for screw connection, and 0.2 to 2.5mm2 / 24AWG to 12AWG for spring connection. The power consumption from the supply via the base unit is 0.03 W. The unit is designed for storage in ambient air temperatures ranging from -25 to +70°C and has a rated insulation voltage (Ui) of 30 V. | Pilz | Quick Quote | ||
| PILZ-266815 Pilz PILZ-266815 is a connector designed for supp. voltage connection, featuring a 3-pin connector configuration. This part is specifically manufactured by Pilz to facilitate electrical connections in automation systems. | Pilz | Quick Quote | ||
| PILZ-266707 Pilz PILZ-266707 is an HMI diagnostic and operating panel designed for industrial applications. It operates within an ambient air temperature range of 0 to +50 °C and features a net height of 193.8 mm, a net width of 143.8 mm, and a net depth of 54.3 mm. This unit runs on Windows 10 IOT and supports multiple connection types, including 2 x RJ45 connectors for 1GBit/s Ethernet, 1 x USB host 3.0, 2 x USB hosts 2.0, 1 x HDMI port, and 1 x VGA port. It requires a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and has a power consumption of 23 W. The communication protocol is Ethernet, and it comes with a memory capacity of 4GB RAM and a 32GB SSD. | Pilz | Quick Quote | ||