PILZ-328061 Pilz Logic Controllers & Displays

Out if stock but available for backorder.

Pilz PILZ-328061 is a communications unit designed for PROFINET communication with a Manufacturer ID of 092Fh and PNO certification. It features potential isolation for supply voltage for module supply and periphery supply, module supply, periphery supply, and between module supply and PROFINET, all with functional insulation and rated surge voltages of 2500V, except for PROFINET which has a rated surge voltage of 1500V. This unit is suitable for DIN rail mounting and operates within an ambient air temperature range of 0 to +60°C. It has a net height of 110.1 mm, incorporates a microSD device with code C007h, and is designed as a shared device standard/safety unit. The rated current is 8A for peripheral supply, and it utilizes an RJ45 connector plug-in/detachable spring-loaded terminal connections. Classified under the sub-range name "Communication module," it has an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc (24Vdc nominal; for both module and peripheral supply). The housing is made of PPE material, with a net width of 64.1 mm and a net depth of 94.7 mm. It supports the PROFINET IO PROFIsafe communication protocol and has a memory capacity of 1.44Byte for input and output devices. The unit can accommodate wire cross-sections of 0.15 to 1.5mm2 / 26AWG to 14AWG conductors. The ambient air temperature for storage ranges from -40 to +70°C. Rated power specifications include 28.8W for the output of the external power supply at supply voltage, 5W at no load, 22W for maximum output power, and 192W for the output of the external power supply with 0.5W at no load. It has a buffer time of 20ms / 0.02 s for supply voltage, a transmission rate of 100MBit/s with automatic selection, and processing times of 1-512 ms for cycle time RT and 1-16 ms for cycle time IRT.