Logic Controllers & Displays - Pilz

Pilz PILZ-773700 is a safety relay designed for contact expansion, including both instantaneous and delayed contact expansion functionalities. It is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. This part has a net height of 94 mm and is designed with control inputs from the PNOZpower bus. The safety output contacts are rated at 4A for various voltages and conditions: 24Vdc (DC-1), 240Vac (AC-1), 24Vdc (DC-13), and 230Vac (AC-15). Connection is facilitated through plug-in/detachable screw terminal connections. As part of the PNOZ po3p sub-range, it measures 22.5mm in width and 121mm in depth, with a degree of protection rated at IP40. The supply voltage is 24Vdc, and the material composition includes an ABS top housing and PPO bottom housing. The rated voltage for AC operation is 240Vac. It features 3 x instantaneous safety outputs (3NO / 3xSPST-NO each made of 2 N.O. contacts in series; 4A 24Vdc DC-1 or 240Vac AC-1 resistive load) and 1 x instantaneous auxiliary output (1NC / SPST-NC made of 2 N.C. contacts in parallel).

Pilz PILZ-540137 is a communications unit designed for PROFIBUS networks, supporting the DP-V0 protocol. It functions as a peripheral device with a station address range of 1-125d and features galvanic isolation for potential separation between PROFIBUS and system voltage, ensuring functional insulation with a rated surge voltage of 2500V. This unit is designed for DIN rail mounting, compatible with a 35mmx7.5mm rail, and operates within an ambient air temperature range of 0 to +55°C. It measures 45mm in width, 115mm in height, and 95mm in depth, with a degree of protection rated at IP20. Connection is facilitated through a 9-pin D-Sub male connector, with options for plug-in/detachable screw or spring-loaded terminal connections. The housing is made from PC material, and it supports a supply voltage of 24Vdc. The communication protocol used is PROFIBUS, with a cross-section range for wiring of 0.25 to 2.5mm2 / 24AWG to 12AWG (1-core flexible; screw connection). Power consumption is rated at 2W. For storage, the unit can withstand ambient temperatures from -25 to +70°C. It includes 6 digital outputs (semiconductor output; 24Vdc; 0.04A; 1W) and 6 digital inputs, with protection functions including short-circuit proofing and galvanic isolation. The response time in case of supply interruption before de-energization is 20ms / 0.02s. Transmission rates supported range from 9.6kBit/s to 12MBit/s, accommodating various speeds for PROFIBUS communication.

Pilz PILZ-540130 is a communications unit designed for Ethernet/IP applications, featuring a communication module that supports Ethernet/IP log and adapter functions with a maximum data length for the fieldbus interface input/output combined at 512 Byte. It offers galvanic isolation for potential separation between Ethernet/IP and system voltage with functional insulation rated at a surge voltage of 2500V. This unit is suitable for DIN rail mounting, specifically on a 35mmx7.5mm rail, and operates within an ambient air temperature range of 0 to +55°C. The device dimensions are W45mm x H115mm x L95mm, with a degree of protection rated at IP20. It requires a 24Vdc supply voltage and is housed in a PC material. The net dimensions include a width of 45mm and a depth of 95mm. For connectivity, it uses an RJ45 connector and supports plug-in/detachable screw or spring-loaded terminal connections accommodating a cross-section of 0.25 to 2.5mm2 / 24AWG to 12AWG (1-core flexible; screw connection). The power consumption is rated at 2W. It is designed for storage in ambient air temperatures ranging from -25 to +70°C. The unit includes 6 digital outputs (semiconductor output; 24Vdc; 0.04A; 1W) and 6 digital inputs, with protection functions including short-circuit proof and galvanic isolation. The response time in case of supply interruption before de-energization is 20ms / 0.02 s, and it supports a transmission rate of 10MBit/s / 100MBit/s for Ethernet/IP communication.

Pilz PILZ-328062 is an analog timer designed for remote control operations, featuring time setting adjustments via a rotary knob. It is engineered for front panel mounting, specifically within a panel mount housing of 22.5mm, falling under the sub-range name FB/F11. This device offers a time delay range from 0 seconds to 10 seconds and is protected by an IP66 degree of protection, ensuring its safeguarding against dust and high-pressure water jets.

Pilz PILZ-772033 is a communications unit designed as an expansion/communication module with a CANopen fieldbus interface. It supports a peripheral device type and adheres to the CiA 301 V4.2.0 log for CANopen. The unit allows for a station address range of 0-99d and features potential isolation between the fieldbus and module voltage with functional insulation rated at a surge voltage of 500V. It is designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. The unit has a net height of 100 mm and utilizes a 9-pin D-sub male connector plug-in/detachable screw or spring-loaded terminal connections, supporting 2 points per spring-loaded connection with a 9mm stripping length. Classified under the sub-range name of Communication module, it measures 27mm in width, has an IP20 degree of protection, and requires a supply voltage of 19.2-30Vdc (24Vdc nominal). The housing is made of PC material, and the unit's net width is 22.5 mm. It communicates via the CANopen protocol and accommodates a cross-section range of 0.25...2.5mm2 / 24AWG...12AWG for various connection types. The power consumption of the module supply is 1.5 W, with a net depth of 115 mm. It can be stored in ambient air temperatures ranging from -25 to +70°C and features protection functions including galvanic isolation and potential isolation. The rated insulation voltage (Ui) is 30 V, and it supports transmission rates from 10kBit/s up to 1MBit/s (CANopen), with a time delay of 20ms for supply interruption before de-energization.

Pilz PILZ-772019 is a Safety I/O unit designed for virtual I/O expansion module applications. It features DIN rail mounting options for both 35mmx7.5mm top hat and 27mm recess width rails. This unit operates within an ambient air temperature range of 0 to +60°C and has a net height of 100 mm. It is specifically designed for safe coupling between PNOZmulti controllers and offers plug-in/detachable screw or spring-loaded terminal connections, accommodating 2 points per spring-loaded connection with a 9mm stripping length. As part of the Safe I/O module sub-range, it has an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc, with 24Vdc nominal. The housing is made of PC material, and it supports a maximum cable length of 1000m per input. The net width of the unit is 22.5 mm, and it can handle wire cross-sections ranging from 0.25 to 2.5mm2 for screw connections and 0.2 to 2.5mm2 for spring connections. The power consumption is rated at 5 W for module supply, and the net depth is 120 mm. It is designed for storage in ambient air temperatures ranging from -25 to +70°C. The unit features 32 digital outputs and 32 digital inputs, both virtual, with a rated impulse voltage of 2.5 kV and a rated insulation voltage of 30 V. The time delay includes a 5s switch-on delay and a 20ms supply interruption before de-energization, with a maximum data transmission time processing time of 35 ms.

Pilz PILZ-773719 is a power supply unit designed for DIN rail mounting, specifically for use with PNOZ mc5p or PNOZ mc5.1p. It features potential and functional insulation with a rated surge voltage of 500V, ensuring potential isolation between module and system voltage. The unit operates within an ambient air temperature range of 0 to +55°C and offers a degree of protection of IP20. It is equipped with both screw terminal and spring-loaded terminal connections, accommodating a wire cross-section of 0.25 to 1.5mm2 for 1-core flexible wires with screw terminals, and similarly for spring-loaded terminals, with specific stripping lengths for each type of connection. The supply voltage requirement is 20.4-28.8Vdc, with a nominal voltage of 24Vdc, and it has a rated power of 5W. The unit's dimensions are 94mm in height, 22.5mm in width, and 121mm in depth, and it is constructed from PPO for the bottom housing and ABS for the front housing. It also features protection functions including galvanic isolation and potential isolation, with a response time of 20ms for supply interruption before de-energization. The ambient air temperature for storage is rated at -25 to +70°C.

Pilz PILZ-772138 is a communications unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. It functions as a communication module with Ethernet/IP fieldbus interfaces, serving as an adapter with galvanic isolation for potential isolation between the fieldbus and module voltage, ensuring functional insulation with a rated surge voltage of 500V. The unit operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with it. It has a net height of 101.4 mm, a width of 22.5 mm, and a depth of 110.4 mm, encased in a green PC housing. The unit requires a supply voltage of 19.2-30Vdc, with a nominal 24Vdc and an additional 3.3Vdc for module supply via the base unit. It features two RJ45 connectors for interface connections, accommodating screw or spring-loaded terminal connections with a cross-section range for wiring. The communication protocol supported is Ethernet/IP, with a transmission rate of 10MBit/s or 100MBit/s. The unit's power consumption is 1.2 W from an external power supply and 0.2 W from the supply via the base unit, with a maximum power dissipation/loss of 1.5 W. It is designed with a degree of protection of IP20 and can be stored in temperatures ranging from -25 to +70°C.

Pilz PILZ-772136 is a communications unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. This communication module features a PROFINET fieldbus interface, acting as an IO-Device with galvanic isolation for potential isolation between the fieldbus and module voltage, ensuring functional insulation with a rated insulation voltage of 30V and a rated surge voltage of 500V. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. The unit has a net height of 101.4 mm, a width of 22.5 mm, and a depth of 110.4 mm, and it requires a supply voltage of 19.2-30Vdc (24Vdc nominal) and an additional 3.3Vdc for module supply via the base unit. It is equipped with 2 x RJ45 connectors for interface connections and supports screw or spring-loaded terminal connections, accommodating a wire cross-section of 0.25...2.5mm2 for 1-core flexible wires with screw connection, 0.2...1.5mm2 for 2-cores flexible with crimp/TWIN crimp connector, and 0.25...2.5mm2 for spring connection. The unit's housing is made of PC material in green color, offering an IP20 degree of protection. It follows the PROFINET communication protocol with a transmission rate of 100MBit/s, has a rated current of 60mA for the maximum external power supply continuous current, and consumes 1.4 W power from the external power supply or 0.2 W from the supply via the base unit, with a maximum power dissipation/loss of 1.5 W. The unit is designed for storage in ambient air temperatures ranging from -25 to +70°C and features galvanic isolation for enhanced protection.

Pilz PILZ-772122 is a communications unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. It operates as a communication module with a single serial interface, supporting an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with it. The unit has a net height of 101.4 mm and offers plug-in/detachable screw or spring-loaded terminal connections, accommodating 2 points per spring-loaded connection with a 9mm stripping length. It falls under the sub-range of communication modules, with dimensions of W27mm and a degree of protection rated at IP20. The supply voltage required is 24Vdc and 3.3Vdc, which is provided via the base unit. Constructed with a PC housing in green, it supports a maximum cable length of 22m per input and has a net width of 22.5 mm. The communication protocol utilized is RS-232, and it can handle a cross-section range of 0.25 to 2.5mm2 for various types of connections. Power consumption from the supply via the base unit is minimal at 0.03 W, with a net depth of 120 mm. It is designed for storage in environments with temperatures ranging from -25 to +70°C. The rated insulation voltage for potential isolation is 30 V, with a current consumption of 9mA from the supply via the base module and maximum power dissipation/losses capped at 0.3 W.