All categories
I/O Systems
All categories
I/O Systems
Pilz PILZ-773410 is a safety I/O unit designed for DIN rail mounting, compatible with both 35mmx7.5mm top hat and 27mm recess width DIN rails. It operates within an ambient air temperature range of -25 to +60°C and offers potential isolation between SC output and system voltage, along with protective separation. The unit is rated for a surge voltage of 2500V and can handle short-term condensation during operation. Its design is coated, with a net height of 94 mm, a width of 22.5 mm, and a depth of 121 mm. The rated current is 0.5mA for residual current at "0" signal and 2A for signal level at "1", with a supply voltage requirement of 20.4-28.8Vdc (24Vdc nominal) or 4.9-5.1Vdc (5Vdc nominal; module supply via base unit). Connection types include screw and spring-loaded terminals, accommodating wire cross-sections ranging from 0.25 to 1.5mm2 for various configurations. The unit's power consumption is 192 W when powered externally and 2.5 W when supplied via the base module. It features 4 digital outputs, short-circuit proof protection, and a rated insulation voltage of 30 V. The device has a processing time of 0.3 ms, with a switch-off delay of 30ms, a switch-on delay of 5s, and can tolerate a supply interruption of 20ms before de-energization. The housing is made of PPO for the bottom and ABS for the front, ensuring compatibility with a wide range of industrial environments.
Quick Quote
Pilz PILZ-773700 is a safety relay designed for contact expansion, including both instantaneous and delayed contact expansion functionalities. It is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. This part has a net height of 94 mm and is designed with control inputs from the PNOZpower bus. The safety output contacts are rated at 4A for various voltages and conditions: 24Vdc (DC-1), 240Vac (AC-1), 24Vdc (DC-13), and 230Vac (AC-15). Connection is facilitated through plug-in/detachable screw terminal connections. As part of the PNOZ po3p sub-range, it measures 22.5mm in width and 121mm in depth, with a degree of protection rated at IP40. The supply voltage is 24Vdc, and the material composition includes an ABS top housing and PPO bottom housing. The rated voltage for AC operation is 240Vac. It features 3 x instantaneous safety outputs (3NO / 3xSPST-NO each made of 2 N.O. contacts in series; 4A 24Vdc DC-1 or 240Vac AC-1 resistive load) and 1 x instantaneous auxiliary output (1NC / SPST-NC made of 2 N.C. contacts in parallel).
Quick Quote
Pilz PILZ-328520 is an I/O unit designed for backplane or rackmount installation, featuring digital I/O-Link electronic module with potential isolation between the module supply and the IO-Link ports. It operates within an ambient air temperature range of 0 to +55°C and has a net height of 110.8 mm, adhering to device code 006B. This standard I/O module supports a rated current of 1A for actuator/sensor supply at L+ and offers plug-in/detachable cage-clamp terminal connections depending on the base module. It is protected to IP20, requires a supply voltage of 16.8-30Vdc (24Vdc nominal), and is constructed with a PPE housing. The module accommodates a maximum cable length of 20m for the IO-Link module and has a net width of 12.5 mm. It features a memory capacity of 32Byte per port and 128Byte per module, with a power consumption of 0.25 W (module supply) and 0.2 W with no load. The net depth is 72.5 mm, and it can be stored in temperatures ranging from -40 to +70°C. It includes 4 digital outputs (IO-Link class A-B; 0.2A) and 4 digital inputs (IO-Link port class A-B; 2.5mA; 5.5mA switchable), with short-circuit proof potential isolation. The response time is 2ms / 0.002 s, supporting COM1/COM2/COM3 speeds, and the power dissipation/losses can reach up to 1.9 W.
Quick Quote
Pilz PILZ-328401 is an I/O unit designed for backplane or rackmount installation, featuring a digital input electronic module with potential isolation between input and module supply, offering reinforced insulation with a rated surge voltage of 4000V. It also provides potential isolation between periphery supply and module supply with functional insulation rated at 2500V, and between input and periphery supply with reinforced insulation rated at 4000V. This standard I/O module operates within an ambient air temperature range of 0 to +55°C and has a net height of 110.8 mm, a width of 12.5 mm, and a depth of 72.5 mm. It supports plug-in/detachable cage-clamp terminal connections and is housed in PPE material, ensuring a degree of protection of IP20. The supply voltage requirement is 16.8-30Vdc (24Vdc nominal) with a module supply power consumption of 0.16 W and a maximum power dissipation/loss of 0.86 W. It features 6 x digital inputs (120Vac; 5-10mA; type 1/3 to IEC61131-2; 0-20Vac at "0"; 74-120Vac at "1") and has a processing time (software filter time) of 5-25.5 ms. The ambient air temperature for storage is rated at -40 to +70°C.
Quick Quote
Pilz PILZ-328206 is an I/O unit designed for backplane or rackmount installation, featuring digital input electronic modules with potential isolation between input and module supply, and functional insulation rated at a surge voltage of 2500V. It operates within an ambient air temperature range of 0 to +55 °C and has a net height of 110.8 mm. This unit is part of the Standard I/O module sub-range, with a degree of protection rated at IP20 and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). The housing is made from PPE material, and the unit has a net width of 12.5 mm and a net depth of 72.5 mm. It can be connected via plug-in/detachable cage-clamp terminal connections and has a power consumption of 0.11 W at input and 0.12 W for module supply. The PILZ-328206 supports 4 x digital inputs (24Vdc; 3-3.5mA; type 3 to IEC61131-2; -3...+5Vdc at "0"; +11...+30Vdc at "1"), with a maximum power dissipation/losses of 0.6 W. It features a processing time for input signals ranging from 0.005 to 0.3 ms, with a software filter time of 0 to 25.5 ms, and is designed for storage in ambient air temperatures of -40 to +70 °C.
Quick Quote
Pilz PILZ-328421 is an I/O unit designed as an analog input electronic module featuring deviations from the measuring range limit value with a linearity error of 0.05%, output variable error at 25°C of 0.3%, and a temperature coefficient of 0.003%/K. It offers repetition accuracy at 25°C of 0.05% and supports voltage measurement with values of least significant bit (LSB) at 195.3125μV, 390.625μV, and 97.65625μV across different voltage ranges. The input resistance is 1MΩ, and it can handle a maximum continuous voltage of 30V. This module utilizes a successive approximation conversion method and ensures potential isolation between analog input and module supply, analog input and periphery supply, as well as periphery supply and module supply, all with functional insulation rated at 2500V surge voltage. It is designed for backplane or rackmount installation, operates within an ambient air temperature range of 0 to +55 °C, and has a net height of 110.8 mm. The device code is 0021h, featuring 64 ST output bits and 56 ST status bits, and it uses plug-in/detachable cage-clamp terminal connections. Classified under the Standard I/O module sub-range, it has an IP20 degree of protection, requires a supply voltage of 16.8-30Vdc (24Vdc nominal), and operates at a maximum cutoff frequency of 700Hz. The housing is made of PPE material, with a net width of 12.5 mm, and it consumes 0.21 W (module supply) and 0.2 W (periphery supply module power consumption with no load). The net depth is 72.5 mm, and it can be stored in ambient air temperatures ranging from -40 to +70 °C. It features 4 x analog inputs for various voltage ranges, with a maximum power dissipation/loss of 0.4 W and a processing time that includes input filter plus an average software filter time ranging from 0.1ms to 20 ms.
Quick Quote
Pilz PILZ-328310 is an I/O unit designed for backplane or rackmount installation, featuring a digital output electronic module. It supports a maximum rated current of 2A with one output under load and 1.5A with two outputs under load, within a permitted output current range of 0-0.625A. The unit offers potential isolation between semiconductor output and module supply with functional insulation, rated for a surge voltage of 2500V. It operates within an ambient air temperature range of 0 to +55°C and has a net height of 110.8 mm. The design includes device code 001Ah with 4 ST output bits plus 4 ST status bits. Connection is facilitated through plug-in/detachable cage-clamp terminal connections. As a standard I/O module, it features an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). The housing is made of PPE material, with a net width of 12.5 mm and a net depth of 72.5 mm. Power consumption is minimal, with 0.15 W for module supply and up to 0.6 W for maximum power consumption of a positive-switching 1-pole semiconductor output. It can store within an ambient air temperature range of -40 to +70°C. The unit includes 4 x digital outputs (1-pole positive switching semiconductor outputs; 24Vdc; 0.5A), ensuring short-circuit proof operation and potential isolation. Power dissipation/losses are capped at a maximum of 0.9 W, with processing times for output signals ranging from a maximum of 0.35 ms for "1" to "0" signal and 0.22 ms for "0" to "1". The internal voltage drop is noted at 0.06 V.
Quick Quote
Pilz PILZ-328402 is an I/O unit designed as a digital output electronic module featuring four digital outputs with normally open (NO) relay contacts, capable of handling both inductive and resistive loads. It offers potential isolation with protective separation between the relay output, periphery supply, and module supply, all rated at a surge voltage of 6000V, as well as between the periphery supply and module supply with functional insulation rated at a surge voltage of 2500V. This unit is suitable for backplane or rackmount installation and operates within an ambient air temperature range of 0 to +55 °C. The device, with a net height of 110.8 mm, width of 25 mm, and depth of 75.3 mm, is designed under device code 001Eh with 4 ST output bits and utilizes plug-in/detachable cage-clamp terminal connections. Classified under the Standard I/O module sub-range, it has an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). Constructed with a PPE housing and AgSnO2 contacts, it has a module supply power consumption of 0.2 W and a periphery supply module power consumption with no load of 1.2 W. The unit can be stored in temperatures ranging from -40 to +70 °C, has a mechanical durability of 50,000,000 operations at no load, a current consumption of 40mA with no load on the periphery supply, maximum power dissipation/losses of 1.4 W, and an output processing time of maximum 50 ms for signal changes from "1" to "0" and "0" to "1".
Quick Quote
Pilz PILZ-328092 is a Safety I/O unit designed for backplane or rackmount installation. It features a digital output electronic safety module with permitted load types including inductive, capacitive, and resistive. The unit provides potential isolation between the semiconductor output and module supply, as well as between the periphery supply and module supply, both with functional insulation and a rated surge voltage of 2500V. It operates within an ambient air temperature range of 0 to +55°C and has a net height of 110.8 mm. The design includes device code 4044h with 8 ST output bits plus 8 ST status bits. The rated current ranges from 0 to 0.625A for permitted output current, with a residual current of 0.02mA at a "0" signal and a maximum transient pulsed output current of 12A. Connection is facilitated through plug-in/detachable cage-clamp terminal connections. This Safe I/O module, with a degree of protection IP20, requires a supply voltage of 16.8-30Vdc (24Vdc nominal) and is housed in PPE material. The net width is 12.5 mm, and the net depth is 72.5 mm. It can be stored in ambient air temperatures ranging from -40 to +70°C. The module features 8 digital outputs (1-pole positive-switching semiconductor outputs; 24Vdc; 0.5A), includes short-circuit proof potential isolation, and has a current consumption of 55mA with no load. Power consumption is 0.65W for module supply, 1.65W for periphery supply module power consumption with no load, and 0.05W for semiconductor output. Power dissipation/losses can reach up to 2.7W. The processing time ranges from 0.1-12.7 ms for the maximum duration ON/OFF time during self-test, with an output processing time of max. 8 ms for "1" to "0" and "0" to "1" signal changes. The internal voltage drop is 0.08 V.
Quick Quote
| Item | Manufacturer | Price | Stock | Delivery | |
|---|---|---|---|---|---|
| PILZ-328770 Pilz PILZ-328770 | Pilz | Quick Quote | ||
| PILZ-773410 Pilz PILZ-773410 is a safety I/O unit designed for DIN rail mounting, compatible with both 35mmx7.5mm top hat and 27mm recess width DIN rails. It operates within an ambient air temperature range of -25 to +60°C and offers potential isolation between SC output and system voltage, along with protective separation. The unit is rated for a surge voltage of 2500V and can handle short-term condensation during operation. Its design is coated, with a net height of 94 mm, a width of 22.5 mm, and a depth of 121 mm. The rated current is 0.5mA for residual current at "0" signal and 2A for signal level at "1", with a supply voltage requirement of 20.4-28.8Vdc (24Vdc nominal) or 4.9-5.1Vdc (5Vdc nominal; module supply via base unit). Connection types include screw and spring-loaded terminals, accommodating wire cross-sections ranging from 0.25 to 1.5mm2 for various configurations. The unit's power consumption is 192 W when powered externally and 2.5 W when supplied via the base module. It features 4 digital outputs, short-circuit proof protection, and a rated insulation voltage of 30 V. The device has a processing time of 0.3 ms, with a switch-off delay of 30ms, a switch-on delay of 5s, and can tolerate a supply interruption of 20ms before de-energization. The housing is made of PPO for the bottom and ABS for the front, ensuring compatibility with a wide range of industrial environments. | Pilz | Quick Quote | ||
| PILZ-773700 Pilz PILZ-773700 is a safety relay designed for contact expansion, including both instantaneous and delayed contact expansion functionalities. It is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. This part has a net height of 94 mm and is designed with control inputs from the PNOZpower bus. The safety output contacts are rated at 4A for various voltages and conditions: 24Vdc (DC-1), 240Vac (AC-1), 24Vdc (DC-13), and 230Vac (AC-15). Connection is facilitated through plug-in/detachable screw terminal connections. As part of the PNOZ po3p sub-range, it measures 22.5mm in width and 121mm in depth, with a degree of protection rated at IP40. The supply voltage is 24Vdc, and the material composition includes an ABS top housing and PPO bottom housing. The rated voltage for AC operation is 240Vac. It features 3 x instantaneous safety outputs (3NO / 3xSPST-NO each made of 2 N.O. contacts in series; 4A 24Vdc DC-1 or 240Vac AC-1 resistive load) and 1 x instantaneous auxiliary output (1NC / SPST-NC made of 2 N.C. contacts in parallel). | Pilz | Quick Quote | ||
| PILZ-328520 Pilz PILZ-328520 is an I/O unit designed for backplane or rackmount installation, featuring digital I/O-Link electronic module with potential isolation between the module supply and the IO-Link ports. It operates within an ambient air temperature range of 0 to +55°C and has a net height of 110.8 mm, adhering to device code 006B. This standard I/O module supports a rated current of 1A for actuator/sensor supply at L+ and offers plug-in/detachable cage-clamp terminal connections depending on the base module. It is protected to IP20, requires a supply voltage of 16.8-30Vdc (24Vdc nominal), and is constructed with a PPE housing. The module accommodates a maximum cable length of 20m for the IO-Link module and has a net width of 12.5 mm. It features a memory capacity of 32Byte per port and 128Byte per module, with a power consumption of 0.25 W (module supply) and 0.2 W with no load. The net depth is 72.5 mm, and it can be stored in temperatures ranging from -40 to +70°C. It includes 4 digital outputs (IO-Link class A-B; 0.2A) and 4 digital inputs (IO-Link port class A-B; 2.5mA; 5.5mA switchable), with short-circuit proof potential isolation. The response time is 2ms / 0.002 s, supporting COM1/COM2/COM3 speeds, and the power dissipation/losses can reach up to 1.9 W. | Pilz | Quick Quote | ||
| PILZ-328401 Pilz PILZ-328401 is an I/O unit designed for backplane or rackmount installation, featuring a digital input electronic module with potential isolation between input and module supply, offering reinforced insulation with a rated surge voltage of 4000V. It also provides potential isolation between periphery supply and module supply with functional insulation rated at 2500V, and between input and periphery supply with reinforced insulation rated at 4000V. This standard I/O module operates within an ambient air temperature range of 0 to +55°C and has a net height of 110.8 mm, a width of 12.5 mm, and a depth of 72.5 mm. It supports plug-in/detachable cage-clamp terminal connections and is housed in PPE material, ensuring a degree of protection of IP20. The supply voltage requirement is 16.8-30Vdc (24Vdc nominal) with a module supply power consumption of 0.16 W and a maximum power dissipation/loss of 0.86 W. It features 6 x digital inputs (120Vac; 5-10mA; type 1/3 to IEC61131-2; 0-20Vac at "0"; 74-120Vac at "1") and has a processing time (software filter time) of 5-25.5 ms. The ambient air temperature for storage is rated at -40 to +70°C. | Pilz | Quick Quote | ||
| PILZ-328206 Pilz PILZ-328206 is an I/O unit designed for backplane or rackmount installation, featuring digital input electronic modules with potential isolation between input and module supply, and functional insulation rated at a surge voltage of 2500V. It operates within an ambient air temperature range of 0 to +55 °C and has a net height of 110.8 mm. This unit is part of the Standard I/O module sub-range, with a degree of protection rated at IP20 and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). The housing is made from PPE material, and the unit has a net width of 12.5 mm and a net depth of 72.5 mm. It can be connected via plug-in/detachable cage-clamp terminal connections and has a power consumption of 0.11 W at input and 0.12 W for module supply. The PILZ-328206 supports 4 x digital inputs (24Vdc; 3-3.5mA; type 3 to IEC61131-2; -3...+5Vdc at "0"; +11...+30Vdc at "1"), with a maximum power dissipation/losses of 0.6 W. It features a processing time for input signals ranging from 0.005 to 0.3 ms, with a software filter time of 0 to 25.5 ms, and is designed for storage in ambient air temperatures of -40 to +70 °C. | Pilz | Quick Quote | ||
| PILZ-328421 Pilz PILZ-328421 is an I/O unit designed as an analog input electronic module featuring deviations from the measuring range limit value with a linearity error of 0.05%, output variable error at 25°C of 0.3%, and a temperature coefficient of 0.003%/K. It offers repetition accuracy at 25°C of 0.05% and supports voltage measurement with values of least significant bit (LSB) at 195.3125μV, 390.625μV, and 97.65625μV across different voltage ranges. The input resistance is 1MΩ, and it can handle a maximum continuous voltage of 30V. This module utilizes a successive approximation conversion method and ensures potential isolation between analog input and module supply, analog input and periphery supply, as well as periphery supply and module supply, all with functional insulation rated at 2500V surge voltage. It is designed for backplane or rackmount installation, operates within an ambient air temperature range of 0 to +55 °C, and has a net height of 110.8 mm. The device code is 0021h, featuring 64 ST output bits and 56 ST status bits, and it uses plug-in/detachable cage-clamp terminal connections. Classified under the Standard I/O module sub-range, it has an IP20 degree of protection, requires a supply voltage of 16.8-30Vdc (24Vdc nominal), and operates at a maximum cutoff frequency of 700Hz. The housing is made of PPE material, with a net width of 12.5 mm, and it consumes 0.21 W (module supply) and 0.2 W (periphery supply module power consumption with no load). The net depth is 72.5 mm, and it can be stored in ambient air temperatures ranging from -40 to +70 °C. It features 4 x analog inputs for various voltage ranges, with a maximum power dissipation/loss of 0.4 W and a processing time that includes input filter plus an average software filter time ranging from 0.1ms to 20 ms. | Pilz | Quick Quote | ||
| PILZ-328310 Pilz PILZ-328310 is an I/O unit designed for backplane or rackmount installation, featuring a digital output electronic module. It supports a maximum rated current of 2A with one output under load and 1.5A with two outputs under load, within a permitted output current range of 0-0.625A. The unit offers potential isolation between semiconductor output and module supply with functional insulation, rated for a surge voltage of 2500V. It operates within an ambient air temperature range of 0 to +55°C and has a net height of 110.8 mm. The design includes device code 001Ah with 4 ST output bits plus 4 ST status bits. Connection is facilitated through plug-in/detachable cage-clamp terminal connections. As a standard I/O module, it features an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). The housing is made of PPE material, with a net width of 12.5 mm and a net depth of 72.5 mm. Power consumption is minimal, with 0.15 W for module supply and up to 0.6 W for maximum power consumption of a positive-switching 1-pole semiconductor output. It can store within an ambient air temperature range of -40 to +70°C. The unit includes 4 x digital outputs (1-pole positive switching semiconductor outputs; 24Vdc; 0.5A), ensuring short-circuit proof operation and potential isolation. Power dissipation/losses are capped at a maximum of 0.9 W, with processing times for output signals ranging from a maximum of 0.35 ms for "1" to "0" signal and 0.22 ms for "0" to "1". The internal voltage drop is noted at 0.06 V. | Pilz | Quick Quote | ||
| PILZ-328402 Pilz PILZ-328402 is an I/O unit designed as a digital output electronic module featuring four digital outputs with normally open (NO) relay contacts, capable of handling both inductive and resistive loads. It offers potential isolation with protective separation between the relay output, periphery supply, and module supply, all rated at a surge voltage of 6000V, as well as between the periphery supply and module supply with functional insulation rated at a surge voltage of 2500V. This unit is suitable for backplane or rackmount installation and operates within an ambient air temperature range of 0 to +55 °C. The device, with a net height of 110.8 mm, width of 25 mm, and depth of 75.3 mm, is designed under device code 001Eh with 4 ST output bits and utilizes plug-in/detachable cage-clamp terminal connections. Classified under the Standard I/O module sub-range, it has an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). Constructed with a PPE housing and AgSnO2 contacts, it has a module supply power consumption of 0.2 W and a periphery supply module power consumption with no load of 1.2 W. The unit can be stored in temperatures ranging from -40 to +70 °C, has a mechanical durability of 50,000,000 operations at no load, a current consumption of 40mA with no load on the periphery supply, maximum power dissipation/losses of 1.4 W, and an output processing time of maximum 50 ms for signal changes from "1" to "0" and "0" to "1". | Pilz | Quick Quote | ||
| PILZ-328092 Pilz PILZ-328092 is a Safety I/O unit designed for backplane or rackmount installation. It features a digital output electronic safety module with permitted load types including inductive, capacitive, and resistive. The unit provides potential isolation between the semiconductor output and module supply, as well as between the periphery supply and module supply, both with functional insulation and a rated surge voltage of 2500V. It operates within an ambient air temperature range of 0 to +55°C and has a net height of 110.8 mm. The design includes device code 4044h with 8 ST output bits plus 8 ST status bits. The rated current ranges from 0 to 0.625A for permitted output current, with a residual current of 0.02mA at a "0" signal and a maximum transient pulsed output current of 12A. Connection is facilitated through plug-in/detachable cage-clamp terminal connections. This Safe I/O module, with a degree of protection IP20, requires a supply voltage of 16.8-30Vdc (24Vdc nominal) and is housed in PPE material. The net width is 12.5 mm, and the net depth is 72.5 mm. It can be stored in ambient air temperatures ranging from -40 to +70°C. The module features 8 digital outputs (1-pole positive-switching semiconductor outputs; 24Vdc; 0.5A), includes short-circuit proof potential isolation, and has a current consumption of 55mA with no load. Power consumption is 0.65W for module supply, 1.65W for periphery supply module power consumption with no load, and 0.05W for semiconductor output. Power dissipation/losses can reach up to 2.7W. The processing time ranges from 0.1-12.7 ms for the maximum duration ON/OFF time during self-test, with an output processing time of max. 8 ms for "1" to "0" and "0" to "1" signal changes. The internal voltage drop is 0.08 V. | Pilz | Quick Quote | ||
