I/O Systems - Pilz

Pilz PILZ-328206 is an I/O unit designed for backplane or rackmount installation, featuring digital input electronic modules with potential isolation between input and module supply, and functional insulation rated at a surge voltage of 2500V. It operates within an ambient air temperature range of 0 to +55 °C and has a net height of 110.8 mm. This unit is part of the Standard I/O module sub-range, with a degree of protection rated at IP20 and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). The housing is made from PPE material, and the unit has a net width of 12.5 mm and a net depth of 72.5 mm. It can be connected via plug-in/detachable cage-clamp terminal connections and has a power consumption of 0.11 W at input and 0.12 W for module supply. The PILZ-328206 supports 4 x digital inputs (24Vdc; 3-3.5mA; type 3 to IEC61131-2; -3...+5Vdc at "0"; +11...+30Vdc at "1"), with a maximum power dissipation/losses of 0.6 W. It features a processing time for input signals ranging from 0.005 to 0.3 ms, with a software filter time of 0 to 25.5 ms, and is designed for storage in ambient air temperatures of -40 to +70 °C.

Pilz PILZ-328092 is a Safety I/O unit designed for backplane or rackmount installation. It features a digital output electronic safety module with permitted load types including inductive, capacitive, and resistive. The unit provides potential isolation between the semiconductor output and module supply, as well as between the periphery supply and module supply, both with functional insulation and a rated surge voltage of 2500V. It operates within an ambient air temperature range of 0 to +55°C and has a net height of 110.8 mm. The design includes device code 4044h with 8 ST output bits plus 8 ST status bits. The rated current ranges from 0 to 0.625A for permitted output current, with a residual current of 0.02mA at a "0" signal and a maximum transient pulsed output current of 12A. Connection is facilitated through plug-in/detachable cage-clamp terminal connections. This Safe I/O module, with a degree of protection IP20, requires a supply voltage of 16.8-30Vdc (24Vdc nominal) and is housed in PPE material. The net width is 12.5 mm, and the net depth is 72.5 mm. It can be stored in ambient air temperatures ranging from -40 to +70°C. The module features 8 digital outputs (1-pole positive-switching semiconductor outputs; 24Vdc; 0.5A), includes short-circuit proof potential isolation, and has a current consumption of 55mA with no load. Power consumption is 0.65W for module supply, 1.65W for periphery supply module power consumption with no load, and 0.05W for semiconductor output. Power dissipation/losses can reach up to 2.7W. The processing time ranges from 0.1-12.7 ms for the maximum duration ON/OFF time during self-test, with an output processing time of max. 8 ms for "1" to "0" and "0" to "1" signal changes. The internal voltage drop is 0.08 V.

Pilz PILZ-772181 is a Safety I/O unit designed as a configurable safety small digital input expansion unit with a comprehensive range of monitoring functions. These include Safe Speed Monitoring (SSM), Safe Speed Range Monitoring (SSR-M), Safe Direction of Movement Monitoring (SDI-M), Safe Operating Stop Monitoring (SOS-M), Safe Stop 1 Monitoring (SS1-M), Safe Stop 2 Monitoring (SS2-M), Safely Limited Acceleration Monitoring (SLA-M), and Safely Limited Acceleration Range Monitoring (SAR-M). It features potential isolation between sensor and system voltage with functional insulation, rated insulation voltage at 30V, and rated surge voltage at 2500V. The same potential isolation specifications apply between sensor 1 and sensor 2. Designed for DIN rail mounting, it supports both 35mmx7.5mm top hat and 27mm recess width rails. The unit operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection in the control cabinet. It has a net height of 101.4 mm, a net width of 22.5 mm, and a net depth of 111 mm. Connection types include plug-in/detachable screw or spring-loaded terminals, and an 8-pin mini-IO female connector for incremental encoder input, accommodating a wide range of wire sizes. The module is IP20 rated, requires a 24Vdc supply voltage from the base unit, and supports a frequency range for input and monitoring without hysteresis. The housing is made from PC material. Power consumption is 3.5 W from the supply via the base module, with a maximum power dissipation/loss of 3.9 W. It has a storage ambient air temperature range of -25 to +70°C and includes protection functions such as short-circuit proof, overload proof, and potential isolation. The response time after a limit value is exceeded is calculated as 1/f_ist + 0.016 s. The unit has two digital inputs for proximity switches, with specific signal level requirements for "1" and "0" states, and a current consumption of 150mA from the supply via the base module.

Pilz PILZ-773310 is a Safety I/O unit designed as a digital input safety expansion module that supports short-term condensation during operation. It is suitable for DIN rail mounting, compatible with both 35mmx7.5mm top hat and 27mm recess width rails. The unit operates within an ambient air temperature range of -25 to +60°C and has a coated design for added durability. It features screw terminal connections and spring-loaded terminal connections, requiring a 7mm stripping length for screw connections and a 9mm stripping length for spring-loaded connections. As part of the Safe I/O module sub-range, it offers an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 4.9-5.1Vdc (5Vdc nominal; module supply via base unit). The bottom housing is made of PPO, and the front housing is ABS, supporting a maximum cable length of 1000m per input. The unit's dimensions are 94mm in height, 22.5mm in width, and 121mm in depth, with a cross-section range for connections from 0.25 to 1.5mm2 / 24AWG to 16AWG for various configurations. It consumes 2.5W of power from the supply via the base module and can be stored within an ambient air temperature range of -25 to +70°C. The response time specifications include a minimum pulse duration of 18ms, with a simultaneity channel 1 and 2 max of 3s and a 2-hand circuit of 0.5s. It features 8 x digital inputs (24Vdc; EN 61131-2 Type 1), with a time delay of up to 4ms for input delay, 5s for switch-on delay, and 20ms for supply interruption before de-energization. The processing time for pulse suppression is 0.6 ms, and the rated insulation voltage (Ui) is 30 V.