PILZ-773410 Pilz I/O Modules

Pilz PILZ-773410 is a safety I/O unit designed for DIN rail mounting, compatible with both 35mmx7.5mm top hat and 27mm recess width DIN rails. It operates within an ambient air temperature range of -25 to +60°C and offers potential isolation between SC output and system voltage, along with protective separation. The unit is rated for a surge voltage of 2500V and can handle short-term condensation during operation. Its design is coated, with a net height of 94 mm, a width of 22.5 mm, and a depth of 121 mm. The rated current is 0.5mA for residual current at "0" signal and 2A for signal level at "1", with a supply voltage requirement of 20.4-28.8Vdc (24Vdc nominal) or 4.9-5.1Vdc (5Vdc nominal; module supply via base unit). Connection types include screw and spring-loaded terminals, accommodating wire cross-sections ranging from 0.25 to 1.5mm2 for various configurations. The unit's power consumption is 192 W when powered externally and 2.5 W when supplied via the base module. It features 4 digital outputs, short-circuit proof protection, and a rated insulation voltage of 30 V. The device has a processing time of 0.3 ms, with a switch-off delay of 30ms, a switch-on delay of 5s, and can tolerate a supply interruption of 20ms before de-energization. The housing is made of PPO for the bottom and ABS for the front, ensuring compatibility with a wide range of industrial environments.

About the manufacturer: Pilz is one of the manufacturers that offers I/O Modules that you can order at Powermatic Associates site. We are at the forefront of driving the evolution of industrial automation. Our company ethos is built on dedication and principles, placing a high priority on safety. Over the years, we have been devoted to creating cutting-edge products and solutions tailored to our customers' requirements.

Check out the PILZ-773410 Pilz price in the box on the right side or send a quick quote.