804-309 WAGO Industrial Automation Components

WAGO 804-309 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal and rated voltages of 320V for overvoltage category III/2 and 630V for category II/2, with a rated impulse voltage of 4kV across both categories. The rated current is 24A according to IEC/EN standards, and under UL 1059, it has a rated voltage of 300V and a rated current of 10A for both Use Groups B and D. CSA approvals mirror the UL ratings with a 300V rated voltage and 10A rated current for Use Groups B and D. This connector has 9 connection points and supports a single connection type with a push-in CAGE CLAMP technology and push-button actuation. It accommodates solid and fine-stranded conductors ranging from 0.25 to 2.5mm2 (20 to 12 AWG), with specific allowances for fine-stranded conductors with insulated or uninsulated ferrules. The strip length for connections is specified as 10 to 11mm, and the conductor connection direction to PCB is 0°. Physically, the connector has a pin spacing of 7.5mm, dimensions of 66.5mm in width, 18.1mm in height, 15mm in depth, and a solder pin length of 3.6mm. It is designed for THT PCB contact with a staggered solder pin arrangement and two solder pins per potential. The connector is made from Polyamide (PA66) in gray, with a flammability class of V0 according to UL94, and uses Chrome-Nickel spring steel and Electrolytic Copper with tin plating for the clamping spring and contact materials, respectively. It operates within a temperature range of -60 to +105°C, weighs 10.8g, and complies with RoHS environmental standards. The product is packaged in boxes with 60 pieces per unit (15 pieces per SPU) and has a GTIN of 4044918515467.