STB16-4RS/1.5-BU Turck Industrial Automation Components

RJ45S RJ45S 423-35M

RJ45S RJ45S 423-35M Turck - RJ45S RJ45S 423-35M PROFINET Cordset, Extension Cordset

Turck

RKV 578-4M

RKV 578-4M Turck - RKV 578-4M DeviceNet™ Cordset, Connection Cordset

Turck

WKC 12T-0.3-FSFD 12/S90

Turck

PKG 3M-0.6-PSG 3M/S90/S101

PKG 3M-0.6-PSG 3M/S90/S101 Turck - PKG 3M-0.6-PSG 3M/S90/S101 Actuator and Sensor Cordset, Extension Cable

Turck

RSC WKC 57

RSC WKC 57 Turck - RSC WKC 57 Actuator and Sensor Accessory, Connector elbow

Turck

STB16-4RS/1.5-BK

STB16-4RS/1.5-BK Turck - STB16-4RS/1.5-BK excom I/O System, Set of 16 4-Pin Terminal Blocks, Screw Terminals, Black

Turck

STB16-4RC/1.5-BU

STB16-4RC/1.5-BU Turck - STB16-4RC/1.5-BU excom I/O System, Set of 16 4-Pin Terminal Blocks, Cage Clamps, Blue

Turck

STB16-4RC/1.5-BK

STB16-4RC/1.5-BK Turck - STB16-4RC/1.5-BK excom I/O System, Set of 16 4-Pin Terminal Blocks, Cage Clamps, Black

Turck

RJ45S RJ45S 423-35M

RJ45S RJ45S 423-35M Turck - RJ45S RJ45S 423-35M PROFINET Cordset, Extension Cordset

Turck

RKV 578-4M

RKV 578-4M Turck - RKV 578-4M DeviceNet™ Cordset, Connection Cordset

Turck

WKC 12T-0.3-FSFD 12/S90

Turck

PKG 3M-0.6-PSG 3M/S90/S101

PKG 3M-0.6-PSG 3M/S90/S101 Turck - PKG 3M-0.6-PSG 3M/S90/S101 Actuator and Sensor Cordset, Extension Cable

Turck

RSC WKC 57

RSC WKC 57 Turck - RSC WKC 57 Actuator and Sensor Accessory, Connector elbow

Turck

990XCP98000

Schneider Electric 990XCP98000 is a lithium backup battery unit designed to provide 3 Vdc power. It is specifically engineered to offer a lifespan of up to 10 years, ensuring long-term reliability for critical applications.

Schneider Electric

ZBVB4

Schneider Electric ZBVB4 is a light unit designed as a light block with an integral LED. It features a degree of protection rated at IP20 and operates on a network frequency of 50/60 Hz. The supply voltage required for this unit is 24 V, applicable for both AC and DC sources. It emits a red light and is equipped with screw-clamp type terminals for connection.

Schneider Electric

RPZF3

Schneider Electric RPZF3 is a plug-in socket designed for DIN rail mounting, part of the RPM sub-range. It features a rated current of 16 A and operates within an ambient air temperature range of -40 to +55 ��C. This socket offers a degree of protection of IP20 and supports a rated voltage (AC) of 600 V. It is equipped with multiple protection functions including Long-time protection (L), Short-time protection with fixed time delay (S), Instantaneous protection (I), and Ground fault protection (G). The RPZF3 has a trip current rating of 2000 AT, a frame current rating of 3000 AF, and a short circuit breaking rating of 125kA at 240Vac, 100kA at 480Y/277Vac and 480Vac, and 50kA at 600Y/347Vac and 600Vac. It is designed to protect 3 poles and utilizes a Micrologic 6.0A (LSIG) Electronic trip unit type.

Schneider Electric

XB5AW34B5

Schneider Electric XB5AW34B5 is an illuminated flush push-button designed for automation control systems. This component, part of the XB5 sub-range, features a plastic body and bezel with a round shape and a plain lens type. It offers a degree of protection rated at IP66, making it suitable for use in environments where dust and water resistance are necessary. The push-button operates with a spring-return mechanism, providing momentary (impulse) activation. It includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts for integration into various circuit designs. The XB5AW34B5 is equipped with an integral LED for illumination, with the light color being red. It operates on a supply voltage of 24 V, accommodating both AC and DC sources, and is compatible with network frequencies of 50/60 Hz. The diameter of the push-button is 22 mm, and it utilizes screw-clamp terminals for secure wire connections.

Schneider Electric

LC1D95G7

Schneider Electric LC1D95G7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power (kW) spans from 25kW at 220-230Vac to 45kW at up to 440Vac, reaching 55kW at 500Vac, and maintaining 45kW at 660-690Vac and 1000Vac, all in AC-3 category. The rated power (HP) varies from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D95G7 is rated at 4,000,000 operations, with an electrical durability (with load) of 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

RZM021FP

Schneider Electric RZM021FP is a suppressor module within the RXZ sub-range, featuring a varistor and a green LED for visual position indication. It is designed to operate with a rated voltage of 110-230 V, both in DC and AC (phase-to-neutral) applications.

Schneider Electric

990XCP98000

Schneider Electric 990XCP98000 is a lithium backup battery unit designed to provide 3 Vdc power. It is specifically engineered to offer a lifespan of up to 10 years, ensuring long-term reliability for critical applications.

Schneider Electric

ZBVB4

Schneider Electric ZBVB4 is a light unit designed as a light block with an integral LED. It features a degree of protection rated at IP20 and operates on a network frequency of 50/60 Hz. The supply voltage required for this unit is 24 V, applicable for both AC and DC sources. It emits a red light and is equipped with screw-clamp type terminals for connection.

Schneider Electric

RPZF3

Schneider Electric RPZF3 is a plug-in socket designed for DIN rail mounting, part of the RPM sub-range. It features a rated current of 16 A and operates within an ambient air temperature range of -40 to +55 ��C. This socket offers a degree of protection of IP20 and supports a rated voltage (AC) of 600 V. It is equipped with multiple protection functions including Long-time protection (L), Short-time protection with fixed time delay (S), Instantaneous protection (I), and Ground fault protection (G). The RPZF3 has a trip current rating of 2000 AT, a frame current rating of 3000 AF, and a short circuit breaking rating of 125kA at 240Vac, 100kA at 480Y/277Vac and 480Vac, and 50kA at 600Y/347Vac and 600Vac. It is designed to protect 3 poles and utilizes a Micrologic 6.0A (LSIG) Electronic trip unit type.

Schneider Electric

XB5AW34B5

Schneider Electric XB5AW34B5 is an illuminated flush push-button designed for automation control systems. This component, part of the XB5 sub-range, features a plastic body and bezel with a round shape and a plain lens type. It offers a degree of protection rated at IP66, making it suitable for use in environments where dust and water resistance are necessary. The push-button operates with a spring-return mechanism, providing momentary (impulse) activation. It includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts for integration into various circuit designs. The XB5AW34B5 is equipped with an integral LED for illumination, with the light color being red. It operates on a supply voltage of 24 V, accommodating both AC and DC sources, and is compatible with network frequencies of 50/60 Hz. The diameter of the push-button is 22 mm, and it utilizes screw-clamp terminals for secure wire connections.

Schneider Electric