PS400R-504-LI2UPN8X-H1141 Turck Industrial Automation Components

Turck PS400R-504-LI2UPN8X-H1141 is a sensor designed for pressure measurement and switching, belonging to the PS500 series. It features a programmable relative pressure sensor/switch with a set point range of 1-100% and a reset point range of 0.5-99.5%. The sensor can measure pressure in units of bar, psi, kPa, MPa, and miscellaneous others. It operates within an ambient air temperature range of -40°C to +80°C and is designed with a rotatable housing of 34mm diameter. The connection is facilitated by a pre-equipped 4-pin M12 Eurofast QD male connector and a 7/16"-20 UNF threaded male process port (SAE-ORB). It offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's body is cylindrical, and it can operate at a maximum switching frequency of 180Hz. It is constructed from 1.4305 (303) stainless steel for both the housing and wetted parts, with a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. The pressure range is 0 to +400bar (0 to +5800psig), and it supports the IO-Link communication protocol. The fluid medium temperature range is -40°C to +85°C. It offers programmable operating modes of NO (Normally Open) or NC (Normally Closed), with two digital outputs (15-30Vdc; NPN/PNP). Protection functions include short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms, with a measurement accuracy of set point accuracy +/-0.5% FS and analog accuracy ≤+/-0.5% FS. The control circuit rated current is 200mA, with a current consumption of 50mA, and it features time delays for ON-delay and OFF-delay settings of 0-50.