Powermatic Associates Logo

FAS4-CSG43 Turck Industrial Automation Components

FAS4-CSG43 on Powermatic Associates
Turck

Part#:FAS4-CSG43

Alt. Part#:F1025

Manufacturer:Turck

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

FAS4-CSG43 Turck - FAS4-CSG43

Product Details

  • Country Of Origin
    USA
  • HTS Code
    8536908530

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of FAS4-CSG43 on Powermatic Associates is $318.10. Order now.

About the product

Turck FAS4-CSG43 is a remote I/O controller designed for surface mounting. It features a fiberglass reinforced PA6-GF30 housing with dimensions of 60 mm in width, 28 mm in depth, and 124.7 mm in height. This controller operates within an ambient air temperature range of -25 to +70°C and offers a degree of protection rated at IP67. It is equipped with 3 digital outputs (PNP / 200mA) and 4 digital inputs (PNP), incorporating short-circuit protection. The FAS4-CSG43 functions as a digital block remote mixed input & output module within the FAS series, specifically designed for AS-interface. It includes connection types of 4 x 5-pin M12 female connectors for I.O. ports and 2 x 4-pin M12 male connectors for FIELDBUS. The supply voltage required is 18-31Vdc, with a nominal 24Vdc, and it utilizes the AS-interface communication protocol.

Similar products from: Turck Industrial Automation Components

FCS-K20-AP8X on Powermatic Associates

FCS-K20-AP8X

Turck

FCS-K20-AP8X Turck - FCS-K20-AP8X Flow Monitoring, Immersion Sensor with Integrated Processor

3 in stock
DK 26-631-3 on Powermatic Associates

DK 26-631-3

Turck

DK 26-631-3 Turck - DK 26-631-3 Actuator and Sensor Cordset, Connection Cordset

3 in stock
CKWM 19-19-15 on Powermatic Associates

CKWM 19-19-15

Turck

CKWM 19-19-15 Turck - CKWM 19-19-15 Actuator and Sensor Cordset, Connection Cordset

1 in stock
BSFD 14 on Powermatic Associates

BSFD 14

Turck

BSFD 14 Turck - BSFD 14

18 in stock
WSC RKC 5711-1M on Powermatic Associates

WSC RKC 5711-1M

Turck

WSC RKC 5711-1M Turck - WSC RKC 5711-1M DeviceNet™ Cordset, Extension Cordset

10 in stock
RSSW RKSW 455-6M on Powermatic Associates

RSSW RKSW 455-6M

Turck

RSSW RKSW 455-6M Turck - RSSW RKSW 455-6M Cable for PROFIBUS-DP, Extension Cable

12 in stock

Manufacturer warranty

FAS4-CSG43 Turck

$318.10

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$318.10

$318.10 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare FAS4-CSG43 with other Industrial Automation Components products

Country Of Origin

HTS Code

Selected product

FAS4-CSG43
Backordered
FAS4-CSG43
Turck

FAS4-CSG43 Turck - FAS4-CSG43

Country Of OriginUSA

HTS Code8536908530

BCA-4HM-E223
20 in stock
BCA-4HM-E223
Turck

BCA-4HM-E223 Turck - BCA-4HM-E223

Country Of OriginUSA

HTS Code8536908530

JBBS-57VM-E813
125 in stock
JBBS-57VM-E813
Turck

JBBS-57VM-E813 Turck - JBBS-57VM-E813

Country Of OriginUSA

HTS Code8536908530

About the manufacturer

Turck

Powermatic Associates is an authorized Turck distributor, committed to delivering top-tier industrial solutions that align with your operational requirements. Turck is a globally recognized provider of advanced automation technology, specializing in sensor, connectivity, and fieldbus technology. Their extensive product range includes robust sensors such as inductive, capacitive, photoelectric, and...

Recently viewed products

Relevant products

FAQ

What is the price of FAS4-CSG43?
Purchase the FAS4-CSG43 from Powermatic Associates at the price of $318.10. Order today.

Out if stock but available for backorder.

FAS4-CSG43 Turck - FAS4-CSG43

Similar products from: Industrial Automation Components

This item can ship within 24h!

LC1D506G7 on Powermatic Associates

LC1D506G7

Verified stock: 1

Schneider Electric LC1D506G7 is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for currents of 80A (AC-1) and 50A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and offers a degree of protection of IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power (kW) spans from 15kW at 220-230Vac to 33kW at 660-690Vac, all in AC-3 category. The rated power (HP) varies from 3HP at 115Vac in single-phase to 40HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of this contactor is rated at 15 million operations at no load, and it supports a phase-to-phase rated voltage (AC) of 690 V.

Schneider Electric

This item can ship within 24h!

LC1DT20BL on Powermatic Associates

LC1DT20BL

Verified stock: 2

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features screw connections for secure installation and operates with 4 poles (4NO) capable of handling a rated current of 20A under AC-1 conditions. This contactor is designed for DIN rail mounting, ensuring a compact and efficient setup with a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 19.2-30Vdc, nominally at 24Vdc, which is 0.8 to 1.25 times the control voltage (Uc). The LC1DT20BL can handle a rated operating voltage (Ue) up to 690 V and is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both rated for instantaneous operation. The contacts are designed to withstand a rated impulse voltage (Uimp) of 6 kV. With mechanical durability rated at 15 million operations at no load, this contactor is built for longevity. It supports a phase-to-phase rated voltage (AC) of 690 V and maintains a power consumption of 2.4 W.

Schneider Electric

This item can ship within 24h!

LC1D95G7 on Powermatic Associates

LC1D95G7

Verified stock: 11

Schneider Electric LC1D95G7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power (kW) spans from 25kW at 220-230Vac to 45kW at up to 440Vac, reaching 55kW at 500Vac, and maintaining 45kW at 660-690Vac and 1000Vac, all in AC-3 category. The rated power (HP) varies from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D95G7 is rated at 4,000,000 operations, with an electrical durability (with load) of 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock