Powermatic Associates Logo

XALK198H7 Schneider Electric Industrial Automation Components

XALK198H7 on Powermatic Associates
Schneider Electric

Part#:XALK198H7

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric XALK198H7 is a pendant station within the XALK sub-range designed for emergency switch functions, featuring a red mushroom head pushbutton. It is constructed from polycarbonate (PC) and offers a high degree of protection with ratings of IP69, IP66, IP67, IP69K, NEMA 13, and NEMA 4X. The rated impulse voltage (Uimp) is 6 kV, and it has a rated insulation voltage (Ui) of 600 V. This part supports rated currents of 6 A at 120Vac (AC-15), 3 A at 240Vac (AC-15), 1.2 A at 600Vac (AC-15), 0.55 A at 125Vdc (DC-13), 0.27 A at 250Vdc (DC-13), and 0.1 A at 600Vdc (DC-13). It features 1 NC (Normally Closed) auxiliary contact and screw-clamp type terminals. The mechanical durability of the part is rated at 300,000 operations at no load, and its electrical durability with load is 1,000,000 operations. The mushroom head diameter is 40 mm. It is designed to operate in a push-pull mode and can withstand ambient air temperatures for storage ranging from -40 to +70 °C, with operational temperature limits also set at a minimum of -40 °C and a maximum of 70 °C.

Product Details

  • [Ie] Rated Operational Current
    3 A 240 V, AC-15, A600 EN/IEC 60947-5-1 6 A 120 V, AC-15, A600 EN/IEC 60947-5-1 0.1 A 600 V, DC-13, Q600 EN/IEC 60947-5-1 0.27 A 250 V, DC-13, Q600 EN/IEC 60947-5-1 0.55 A 125 V, DC-13, Q600 EN/IEC 60947-5-1 1.2 A 600 V, AC-15, A6
  • Electrical Durability
    1000000 cycles, AC-15, 2 A 230 V 3600 cyc/h 0.5 EN/IEC 60947-5-1 appendix C 1000000 cycles, AC-15, 3 A 120 V 3600 cyc/h 0.5 EN/IEC 60947-5-1 appendix C 1000000 cycles, AC-15, 4 A 24 V 3600 cyc/h 0.5 EN/IEC 60947-5-1 appendix C 1000000 cycle
  • Shape Of Screw Head
    Cross Philips no 1 Cross pozidriv No 1 Slotted flat Ø 4 mm Slotted flat Ø 5.5 mm
  • Cable Entry
    1 knock-out for cable entry 0.00…0.55 in (0…14 mm) 2 knock-outs for Pg 13 cable gland and ISO M20 0.00…0.47 in (0…12 mm) Tapped entry
  • Operating Travel
    0.06 in (1.5 mm) NC changing electrical state) 0.17 in (4.3 mm) total travel)
  • Electrical Reliability
    Λ < 10exp(-6) 5 V, 1 mA EN/IEC 60947-5-4 Λ < 10exp(-8) 17 V, 5 mA EN/IEC 60947-5-4
  • Connections - Terminals
    Screw clamp terminals, <= 2 x 1.5 mm² with cable end conforming to EN/IEC 60947-1 Screw clamp terminals, >= 1 x 0.22 mm² without cable end conforming to EN/IEC 60947-1
  • Control Station Application
    Emergency stop function Emergency switching off function
  • [Uimp] Rated Impulse Withstand Voltage
    6 kV EN/IEC 60947-1
  • [Ith] Conventional Free Air Thermal Current
    10 A EN/IEC 60947-5-1
  • Contacts Material
    Silver alloy (Ag/Ni)
  • Short-Circuit Protection
    10 A cartridge fuse gG EN/IEC 60947-5-1
  • [Ui] Rated Insulation Voltage
    600 V 3)EN/IEC 60947-1
  • Mechanical Durability
    300000 cycles
  • Tightening Torque
    7.08…10.62 lbf.in (0.8…1.2 N.m) EN/IEC 60947-1
  • Operating Force
    50 N
  • Net Weight
    0.40 lb(US) (0.183 kg)
  • Control Station Composition
    1 mushroom head Ø 40 mm push-button, red 1 NC unmarked
  • Resistance To High Pressure Washer
    1015.26 psi (7000000 Pa) 131 °F (55 °C) 0.1 m
  • Reset
    Push-pull
  • Contact Operation
    Slow-break
  • Positive Opening
    With conforming to EN/IEC 60947-5-1 appendix K
  • Operator Profile
    1 mushroom head push-button
  • Operators Description
    Red unmarked 1 NC
  • Colour Of Base Of Enclosure
    Light grey (RAL 7035)
  • Product Destination
    For XB5 Ø 22 mm control and signalling units
  • Device Short Name
    XALK
  • Colour Of Cover
    Yellow RAL 1021)
  • Material
    Polycarbonate
  • Product Or Component Type
    Complete control station
  • Range Of Product
    Harmony XALK

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of XALK198H7 on Powermatic Associates is $119.63. Order now.

XALK198H7 Related Documents

Catalog-1631028751116.pdfInstruction Sheet-1631028751114.pdfProduct Datasheet-1631028751111.pdf

Similar products from: Schneider Electric Industrial Automation Components

NSYTBP16128T on Powermatic Associates

NSYTBP16128T

Schneider Electric

Schneider Electric - NSYTBP16128T

25 in stock
M9F53350 on Powermatic Associates

M9F53350

Schneider Electric

Schneider Electric M9F53350 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 3 Pole configuration and a rated current of 50A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. This MCB offers a short circuit breaking rating of 10kA AIR at 120Vac, 240Vac, and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and ensures all three poles are protected. The tripping curve for this device is classified as D.

1 in stock
XB7EV05MP on Powermatic Associates

XB7EV05MP

Schneider Electric

Schneider Electric XB7EV05MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, indicating a high level of protection against dust, water, and other environmental factors. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It is designed with screw-clamp type terminals for secure connections. The light emitted by the LED is yellow. The physical dimensions of the XB7EV05MP include a diameter of 22 mm, a net height of 29 mm, a net depth of 54 mm, and a net width of 29 mm.

6 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

94 in stock
M9F43303 on Powermatic Associates

M9F43303

Schneider Electric

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

5 in stock
DFCC2 on Powermatic Associates

DFCC2

Schneider Electric

Schneider Electric - DFCC2

14 in stock

Manufacturer warranty

XALK198H7 Schneider Electric

$119.63

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$119.63

$119.63 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare XALK198H7 with other Industrial Automation Components products

[Ie] Rated Operational Cu...

Electrical Durability

Shape Of Screw Head

Cable Entry

Operating Travel

Electrical Reliability

Connections - Terminals

Control Station Applicati...

[Uimp] Rated Impulse With...

[Ith] Conventional Free A...

Selected product

XALK198H7
Backordered
XALK198H7
Schneider Electric

Schneider Electric XALK198H7 is a pendant station within the XALK sub-range designed for emergency s...

[Ie] Rated Operational Current3 A 240 V, AC-15, A600 EN/IE...

Electrical Durability1000000 cycles, AC-15, 2 A 2...

Shape Of Screw HeadCross Philips no 1 Cross poz...

Cable Entry1 knock-out for cable entry ...

Operating Travel0.06 in (1.5 mm) NC changing...

Electrical ReliabilityΛ < 10exp(-6) 5 V, 1 mA EN/I...

Connections - TerminalsScrew clamp terminals, <= 2 ...

Control Station ApplicationEmergency stop function Emer...

[Uimp] Rated Impulse Withstand Voltage6 kV EN/IEC 60947-1

[Ith] Conventional Free Air Thermal Current10 A EN/IEC 60947-5-1

XB5AA42
2 in stock
XB5AA42
Schneider Electric

Schneider Electric XB5AA42 is a flush push-button designed for various automation applications. This...

[Ie] Rated Operational Current-

Electrical Durability-

Shape Of Screw Head-

Cable Entry-

Operating Travel-

Electrical Reliability-

Connections - Terminals-

Control Station Application-

[Uimp] Rated Impulse Withstand Voltage-

[Ith] Conventional Free Air Thermal Current-

XB5AW34B5
2 in stock
XB5AW34B5
Schneider Electric

Schneider Electric XB5AW34B5 is an illuminated flush push-button designed for automation control sys...

[Ie] Rated Operational Current-

Electrical Durability-

Shape Of Screw Head-

Cable Entry-

Operating Travel-

Electrical Reliability-

Connections - Terminals-

Control Station Application-

[Uimp] Rated Impulse Withstand Voltage-

[Ith] Conventional Free Air Thermal Current-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock
LMHCA571C on Powermatic Associates

LMHCA571C

Novanta IMS

Novanta IMS LMHCA571C is a stepper motor that falls under the high-torque stepper motors sub-range. It features an integrated driver and a high-torque DC stepper motor with an incremental magnetic encoder, utilizing a single motor stack and closed-loop hMTechnology for precise control. This motor offers a variety of connection types, including a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting CANopen communication protocol. It operates on a supply voltage range of 12Vdc to 60Vdc, with optimal performance at 24Vdc or 48Vdc. The LMHCA571C is designed for mounting with a 57x57mm flange and is rated with a degree of protection of IP65, making it suitable for environments where dust and water resistance is necessary. It has a moment of inertia of 0.14kg.cm^2 and can deliver a stall torque of 107N.cm. The resolution of this stepper motor is defined by a 1.8° step angle.

0 in stock

Relevant products

XALK178 on Powermatic Associates

XALK178

Verified stock: 0

Schneider Electric XALK178 is a control station designed for emergency stop functions, featuring a red mushroom head pushbutton. It is part of the XALK sub-range and is constructed from polycarbonate (PC), ensuring durability. This control station is equipped with a rated impulse voltage (Uimp) of 6 kV and offers a high degree of protection with ratings of IP69, IP67, IP66, IP69K, NEMA 13, and NEMA 4X. It supports rated currents of 6 A at 120Vac (AC-15), 3 A at 240Vac (AC-15), 1.2 A at 600Vac (AC-15), 0.55 A at 125Vdc (DC-13), 0.27 A at 250Vdc (DC-13), and 0.1 A at 600Vdc (DC-13). The device boasts a mechanical durability of 3,000,000 operations at no load and an electrical durability of 1,000,000 operations with load. The mushroom head diameter is 40 mm, with overall dimensions of 68 mm in height, 92.5 mm in depth, and 68 mm in width. It has a rated insulation voltage (Ui) of 600 V and includes 1 NC (Normally Closed) auxiliary contact. The XALK178 is designed for a wide range of ambient temperatures, from -40 to +70 °C, and features screw-clamp terminals for connections. It operates with a turn-to-release mechanism, ensuring ease of use in emergency situations.

Schneider Electric

XALK178E on Powermatic Associates

XALK178E

Verified stock: 0

Schneider Electric XALK178E is a control station designed for emergency stop functions, featuring a red mushroom head pushbutton. It is part of the XALK sub-range and is constructed from polycarbonate (PC), ensuring durability. This control station is equipped with a rated impulse voltage (Uimp) of 6 kV and offers a degree of protection rated at IP69, IP67, IP66, IP69K, NEMA 13, and NEMA 4X. It supports a rated current of 6 A at 120Vac (AC-15), 3 A at 240Vac (AC-15), 1.2 A at 600Vac (AC-15), 0.55 A at 125Vdc (DC-13), 0.27 A at 250Vdc (DC-13), and 0.1 A at 600Vdc (DC-13). The XALK178E boasts a mechanical durability of 3,000,000 operations at no load and an electrical durability of 1,000,000 operations with load. The mushroom head diameter is 40 mm, with net dimensions of 68 mm in height, 92.5 mm in depth, and 68 mm in width. It features 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, a rated insulation voltage (Ui) of 600 V, and screw-clamp type terminals. The control station operates with a turn-to-release mechanism and is designed to function within an ambient air temperature range for storage of -40 to +70 °C, with minimum and maximum operating temperatures also set at -40 °C and 70 °C, respectively.

Schneider Electric

XALK178EH7 on Powermatic Associates

XALK178EH7

Verified stock: 0

Schneider Electric XALK178EH7 is a pendant station within the XALK sub-range designed for emergency switch functions, featuring a red mushroom head pushbutton. It is constructed from polycarbonate (PC) and offers a high degree of protection with ratings of IP69, IP66, IP67, IP69K, NEMA 13, and NEMA 4X. The rated impulse voltage (Uimp) is 6 kV, and it can handle rated currents of 6 A at 120Vac (AC-15), 3 A at 240Vac (AC-15), 1.2 A at 600Vac (AC-15), 0.55 A at 125Vdc (DC-13), 0.27 A at 250Vdc (DC-13), and 0.1 A at 600Vdc (DC-13). This part has a mechanical durability of 300,000 operations and an electrical durability of 1,000,000 operations with load. The mushroom head diameter is 40 mm, and it includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. The rated insulation voltage (Ui) is 600 V. It is designed for use in ambient air temperatures for storage ranging from -40 to +70 °C and operates with a turn-to-release mechanism. The terminals are screw-clamp type, and it is specified for minimum and maximum operating temperatures of -40 °C and 70 °C, respectively.

Schneider Electric

XALK178FH7 on Powermatic Associates

XALK178FH7

Verified stock: 0

Schneider Electric XALK178FH7 is a pendant station within the XALK sub-range designed for emergency switch functions, featuring a red mushroom head pushbutton with a diameter of 40 mm. It is constructed from polycarbonate (PC) and offers a high degree of protection with ratings of IP69, IP66, IP67, IP69K, NEMA 13, and NEMA 4X. The rated impulse voltage (Uimp) is 6 kV, and it has a rated insulation voltage (Ui) of 600 V. This part supports rated currents of 6 A at 120Vac (AC-15), 3 A at 240Vac (AC-15), 1.2 A at 600Vac (AC-15), 0.55 A at 125Vdc (DC-13), 0.27 A at 250Vdc (DC-13), and 0.1 A at 600Vdc (DC-13). It features 2 NC (Normally Closed) auxiliary contacts and screw-clamp type terminals. The mechanical durability of the part is rated at 300,000 operations at no load, and its electrical durability with load is 1,000,000 operations. The operating mode is turn-to-release, and it is designed to function within an ambient air temperature range for storage of -40 to +70 degrees Celsius, with a minimum temperature tolerance of -40 degrees Celsius and a maximum of 70 degrees Celsius.

Schneider Electric

XALK178H7 on Powermatic Associates

XALK178H7

Verified stock: 0

Schneider Electric XALK178H7 is a pendant station within the XALK sub-range, designed with a control station function featuring an emergency switch with a 40 mm red mushroom head pushbutton. It is constructed from polycarbonate (PC) and offers a high degree of protection rated at IP69, IP66, IP67, IP69K, NEMA 13, and NEMA 4X. The rated current varies with voltage: 6 A at 120Vac (AC-15), 3 A at 240Vac (AC-15), 1.2 A at 600Vac (AC-15), 0.55 A at 125Vdc (DC-13), 0.27 A at 250Vdc (DC-13), and 0.1 A at 600Vdc (DC-13). This part has a mechanical durability of 300,000 operations at no load and an electrical durability of 1,000,000 operations with load. It features a rated insulation voltage (Ui) of 600 V and includes 1 NC (Normally Closed) auxiliary contact. The XALK178H7 is equipped with screw-clamp terminals and is designed to operate in a turn-to-release mode. It can withstand ambient air temperatures for storage ranging from -40 to +70 degrees Celsius, with operational temperature limits also set at a minimum of -40 degrees Celsius and a maximum of 70 degrees Celsius.

Schneider Electric

FAQ

What is the price of XALK198H7?
Purchase the XALK198H7 from Powermatic Associates at the price of $119.63. Order today.

Out if stock but available for backorder.

Schneider Electric XALK198H7 is a pendant station within the XALK sub-range designed for emergency switch functions, featuring a red mushroom head pushbutton. It is constructed from polycarbonate (PC) and offers a high degree of protection with ratings of IP69, IP66, IP67, IP69K, NEMA 13, and NEMA 4X. The rated impulse voltage (Uimp) is 6 kV, and it has a rated insulation voltage (Ui) of 600 V. This part supports rated currents of 6 A at 120Vac (AC-15), 3 A at 240Vac (AC-15), 1.2 A at 600Vac (AC-15), 0.55 A at 125Vdc (DC-13), 0.27 A at 250Vdc (DC-13), and 0.1 A at 600Vdc (DC-13). It features 1 NC (Normally Closed) auxiliary contact and screw-clamp type terminals. The mechanical durability of the part is rated at 300,000 operations at no load, and its electrical durability with load is 1,000,000 operations. The mushroom head diameter is 40 mm. It is designed to operate in a push-pull mode and can withstand ambient air temperatures for storage ranging from -40 to +70 °C, with operational temperature limits also set at a minimum of -40 °C and a maximum of 70 °C.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock