Powermatic Associates Logo

PKGTALP1 Schneider Electric Electronic Components

PKGTALP1 on Powermatic Associates
Schneider Electric

Part#:PKGTALP1

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Load center accessory, QO/Homeline, ground bar kit

Product Details

  • Tightening Torque
    3.4 N.m 35 lb.in, AWG 6...AWG 4 25 lb.in, AWG 8
  • Number Of Connectors
    9 9
  • Provided Equipment
    2 grounding bar 1 lug
  • Product Type
    Bar
  • Depth
    0.312 in (7.92 mm)
  • Height
    0.437 in (11.10 mm)
  • Product Line
    QO

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of PKGTALP1 on Powermatic Associates is $2.26. Order now.

PKGTALP1 Related Documents

Instruction Sheet-1631033512265.pdfProduct Datasheet-1631033512262.pdfCatalog-1631033512267.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
LC1F400G7 on Powermatic Associates

LC1F400G7

Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

1 in stock
LJB65 on Powermatic Associates

LJB65

Schneider Electric

WIREWAY 6 x 6 - N12 - 5 ft lg

2 in stock

Manufacturer warranty

PKGTALP1 Schneider Electric

$2.26

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$2.26

$2.26 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare PKGTALP1 with other Electronic Components products

Tightening Torque

Number Of Connectors

Provided Equipment

Product Type

Depth

Height

Product Line

Selected product

PKGTALP1
Backordered
PKGTALP1
Schneider Electric

Load center accessory, QO/Homeline, ground bar kit

Tightening Torque3.4 N.m 35 lb.in, AWG 6...A...

Number Of Connectors9 9

Provided Equipment2 grounding bar 1 lug

Product TypeBar

Depth0.312 in (7.92 mm)

Height0.437 in (11.10 mm)

Product LineQO

QOB330GFI5237
8 in stock
QOB330GFI5237
Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit B...

Tightening Torque40.71 lbf.in (4.6 N.m) 0.00…...

Number Of Connectors-

Provided Equipment-

Product Type-

Depth2.91 in (73.91 mm)

Height4.12 in (104.65 mm)

Product Line-

QOB3405254
1 in stock
QOB3405254
Schneider Electric

Square D by Schneider Electric QOB3405254 is a Miniature Circuit Breaker (MCB) featuring an auxiliar...

Tightening Torque40.71 lbf.in (4.6 N.m)

Number Of Connectors-

Provided Equipment-

Product Type-

Depth2.91 in (73.91 mm)

Height3.12 in (79.25 mm)

Product Line-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

PKGTALP3 on Powermatic Associates

PKGTALP3

Verified stock: 0

Turck PKGTALP3 is a double-ended cable or cordset designed for automation applications, featuring a 4.4mm cable sheath outer diameter and a rated current of 4A. It is equipped with a 3-pin M8 picofast female connector and a 3-pin M8 picofast male connector, both with M8x1 threaded coupling nuts, facilitating a straight connection. This part falls under the M8 picofast sub-range, characterized by its straight female to male configuration. It offers a degree of protection rated at IP67, NEMA 1, NEMA 3, NEMA 4, and NEMA 6P, ensuring its suitability for various environmental conditions. The connectors are made from stainless steel and nickel-plated brass, while the cable jacket is PVC, colored yellow for easy identification. The cable length is 20cm (approximately 7 inches), and it is designed to operate at a rated voltage of 125Vac with a cross-section of 3 x #24AWG.

Schneider Electric

FAQ

What is the price of PKGTALP1?
Purchase the PKGTALP1 from Powermatic Associates at the price of $2.26. Order today.

Out if stock but available for backorder.

Load center accessory, QO/Homeline, ground bar kit

Similar products from: Electronic Components

This item can ship within 24h!

T18SP6R on Powermatic Associates

T18SP6R

Verified stock: 4

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

Banner

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock