Powermatic Associates Logo

GV2ME163 Schneider Electric Industrial Automation Components

GV2ME163 on Powermatic Associates
Schneider Electric

Part#:GV2ME163

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric GV2ME163 is a Motor Protection Circuit Breaker (MPCB) within the GV2ME sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and offers protection functions against short-circuit and thermal overload. The rated current range for this device is 9 - 14 A, with a rated insulation voltage (Ui) of 690 V. It is designed for DIN rail mounting and has a net width of 45 mm. Operation is facilitated through a push-button mechanism. The protection settings for short-circuit pickup current are fixed at 170A. The GV2ME163 has a rated impulse voltage (Uimp) of 6 kV and supports rated active power outputs of 5.5 kW at 400/415Vac, 7.5 kW at 500Vac, and both 11 kW and 9 kW at 690Vac. Its trip current rating is 14 AT, with a frame current rating of 32 AF. The mechanical durability of the device is rated at 100,000 operations without load, and its electrical durability, under load conditions (440Vac; AC-3; In/2), is also 100,000 operations. It features spring type terminals, a rated voltage (AC) phase-to-phase of 690 V, and all three poles are protected. The minimum and maximum current ratings are 9 A and 14 A, respectively, with a thermal-magnetic trip unit type. It is categorized under utilisation category A AC-3.

Product Details

  • Breaking Capacity
    100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2 3 kA Icu 690 V AC 50/60 Hz IEC 60947-2 15 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2 8 kA Icu 440 V AC 50/60 Hz IEC 60947-2 6 kA Icu 500 V AC 50/60 Hz IEC 60947-2
  • [Ics] Rated Service Short-Circuit Breaking Capacity
    100 % 230/240 V AC 50/60 Hz IEC 60947-2 75 % 690 V AC 50/60 Hz IEC 60947-2 75 % 500 V AC 50/60 Hz IEC 60947-2 50 % 400/415 V AC 50/60 Hz IEC 60947-2 50 % 440 V AC 50/60 Hz IEC 60947-2
  • Utilisation Category
    AC-3 IEC 60947-4-1 Category A conforming to IEC 60947-2
  • Motor Power Kw
    5.5 kW 400/415 V AC 50/60 Hz 7.5 kW 500 V AC 50/60 Hz
  • Fixing Mode
    35 mm symmetrical DIN rail clipped Panel screwed with adaptor plate)
  • Maximum Operating Rate
    25 cyc/h
  • Net Weight
    0.62 lb(US) (0.28 kg)
  • Depth
    3.09 in (78.5 mm)
  • Width
    1.77 in (45 mm)
  • Electrical Durability
    100000 cycles AC-3 440 V
  • Height
    3.98 in (101 mm)
  • Phase Failure Sensitivity
    Yes IEC 60947-4-1
  • Suitability For Isolation
    Yes conforming to IEC 60947-1
  • Rated Duty
    Continuous IEC 60947-4-1
  • Mechanical Durability
    100000 cycles
  • Power Dissipation Per Pole
    2.5 W
  • [Ue] Rated Operational Voltage
    690 V AC 50/60 Hz conforming to IEC 60947-2
  • Magnetic Tripping Current
    170 A
  • Thermal Protection Adjustment Range
    9…14 A
  • [Uimp] Rated Impulse Withstand Voltage
    6 kV IEC 60947-2
  • [Ith] Conventional Free Air Thermal Current
    14 A IEC 60947-4-1
  • [Ui] Rated Insulation Voltage
    690 V AC 50/60 Hz IEC 60947-2
  • Line Rated Current
    14 A
  • Control Type
    Push-button
  • Network Frequency
    50/60 Hz IEC 60947-4-1
  • Operating Position
    Any position
  • Trip Unit Technology
    Thermal-magnetic
  • Network Type
    AC
  • Poles Description
    3P
  • Device Application
    Motor
  • Range
    TeSys
  • Device Short Name
    GV2ME
  • Product Or Component Type
    Circuit breaker
  • Product Name
    TeSys GV2

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of GV2ME163 on Powermatic Associates is $230.48. Order now.

GV2ME163 Related Documents

Product Datasheet-1631034981582.pdfInstruction Sheet-1631034981585.pdfCatalog-1631034981580.pdf

Similar products from: Schneider Electric Industrial Automation Components

QOGFI2PAF on Powermatic Associates

QOGFI2PAF

Schneider Electric

CB HANDLE PADLOCK ATTACHMENT

4 in stock
9080LBA365112 on Powermatic Associates

9080LBA365112

Schneider Electric

Schneider Electric - 9080LBA365112

4 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock
LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

17 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
RXZE2M114M on Powermatic Associates

RXZE2M114M

Schneider Electric

Schneider Electric RXZE2M114M is a plug-in socket within the RXZ sub-range designed for a rated current of 10 A and an operational ambient air temperature range of -40 to +55 °C. It features a degree of protection classified as IP20 and is equipped with connector type terminals. The socket is specified for a rated voltage (AC) of 250 V, phase-to-neutral.

8 in stock

Manufacturer warranty

GV2ME163 Schneider Electric

$230.48

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$230.48

$230.48 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare GV2ME163 with other Industrial Automation Components products

Breaking Capacity

[Ics] Rated Service Short...

Utilisation Category

Motor Power Kw

Fixing Mode

Maximum Operating Rate

Net Weight

Depth

Width

Electrical Durability

Selected product

GV2ME163
Backordered
GV2ME163
Schneider Electric

Schneider Electric GV2ME163 is a Motor Protection Circuit Breaker (MPCB) within the GV2ME sub-range,...

Breaking Capacity100 kA Icu 230/240 V AC 50/6...

[Ics] Rated Service Short-Circuit Breaking Capacity100 % 230/240 V AC 50/60 Hz ...

Utilisation CategoryAC-3 IEC 60947-4-1 Category ...

Motor Power Kw5.5 kW 400/415 V AC 50/60 Hz...

Fixing Mode35 mm symmetrical DIN rail c...

Maximum Operating Rate25 cyc/h

Net Weight0.62 lb(US) (0.28 kg)

Depth3.09 in (78.5 mm)

Width1.77 in (45 mm)

Electrical Durability100000 cycles AC-3 440 V

M9F43306
2 in stock
M9F43306
Schneider Electric

Schneider Electric M9F43306 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designe...

Breaking Capacity-

[Ics] Rated Service Short-Circuit Breaking Capacity-

Utilisation Category-

Motor Power Kw-

Fixing Mode-

Maximum Operating Rate-

Net Weight-

Depth-

Width-

Electrical Durability-

M9F43303
5 in stock
M9F43303
Schneider Electric

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designe...

Breaking Capacity-

[Ics] Rated Service Short-Circuit Breaking Capacity-

Utilisation Category-

Motor Power Kw-

Fixing Mode-

Maximum Operating Rate-

Net Weight-

Depth-

Width-

Electrical Durability-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

GV2ME026 on Powermatic Associates

GV2ME026

Verified stock: 0

Schneider Electric GV2ME026 is a Motor Protection Circuit Breaker (MPCB) within the GV2ME sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload with a rated current of 0.16 - 0.25 A. The device is equipped for DIN rail mounting and has a net width of 45 mm. Operation is facilitated through a push-button mechanism. Protection settings for short-circuit pickup current are fixed at 2.4A. The GV2ME026 has a rated insulation voltage (Ui) of 690 V, a rated impulse voltage (Uimp) of 6 kV, and supports a rated active power (kW) of 0.06 kW at 400/415Vac. Its trip current rating is 0.25 AT with a frame current rating of 32 AF. Mechanical durability is rated at 100,000 operations at no load, and electrical durability at 100,000 operations with load (440Vac; AC-3; In/2). Terminal connections are made via lug-ring terminals. The rated voltage (AC) phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 0.16 A and a maximum current of 0.25 A, classified under utilisation category A AC-3.

Schneider Electric

GV2ME043 on Powermatic Associates

GV2ME043

Verified stock: 0

Schneider Electric GV2ME043 is a Motor Protection Circuit Breaker (MPCB) within the GV2ME sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload with a rated current of 0.4 - 0.63 A. The device is equipped for DIN rail or mounting plate installation, with a net width of 45 mm and operates via a push-button. Protection settings are fixed with a short-circuit pickup current of 8A. It has a rated insulation voltage (Ui) of 690 V and a rated impulse voltage (Uimp) of 6 kV. The rated active power varies with voltage: 0.18 kW at 400/415Vac, 0.12 kW at 400/415Vac, and 0.37 kW at 690Vac. The trip current rating is 0.63 AT, and the frame current rating is 32 AF. Mechanical durability is rated at 100,000 operations without load, and electrical durability at 100,000 operations with load (440Vac; AC-3; In/2). Connection is facilitated by spring-type terminals. The rated voltage for phase-to-phase is 690 V, and it is designed to protect 3 poles. The trip unit type is thermal-magnetic, supporting a minimum current of 0.4 A and a maximum current of 0.63 A, classified under utilisation category A AC-3.

Schneider Electric

GV2ME103 on Powermatic Associates

GV2ME103

Verified stock: 0

Schneider Electric GV2ME103 is a Motor Protection Circuit Breaker (MPCB) within the GV2ME sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 4 - 6.3 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and operates via a push-button. Protection settings are fixed with a short-circuit pickup current of 78A, and it has a rated impulse voltage (Uimp) of 6 kV. The rated active power is 2.2 kW at 400/415Vac and 3 kW at 500Vac, with a trip current rating of 6.3 AT and a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 440Vac; AC-3; In/2 with load. The terminals are of the spring type, and the rated voltage for AC phase-to-phase is 690 V. All three poles are protected, with a minimum current of 4 A and a maximum of 6.3 A. The trip unit type is thermal-magnetic, suitable for utilisation category A AC-3.

Schneider Electric

GV2ME143 on Powermatic Associates

GV2ME143

Verified stock: 0

Schneider Electric GV2ME143 is a Thermal-Magnetic Motor Protection Circuit Breaker (MPCB) and Manual Motor Starter designed for motor protection. It is part of the GV2ME sub-range and features 3 poles with protection functions including short-circuit and thermal protection (overload). The rated current ranges from 6 to 10 A, with a rated insulation voltage (Ui) of 690 V. This device is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and operates via a push-button. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active power (kW) of 4 kW and 3 kW at 400/415Vac, 5.5 kW and 4 kW at 500Vac, and 7.5 kW and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts mechanical durability of 100,000 operations at no load and electrical durability of 100,000 operations with load (440Vac; AC-3; In/2). The GV2ME143 uses spring type terminals, has a rated voltage (AC) - phase-to-phase of 690 V, and all three poles are protected. The minimum current is 6 A, and the maximum is 10 A, with a trip unit type of thermal-magnetic and a utilisation category of A AC-3.

Schneider Electric

GV2ME213 on Powermatic Associates

GV2ME213

Verified stock: 0

Schneider Electric GV2ME213 is a Motor Protection Circuit Breaker (MPCB) within the GV2ME sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and offers protection functions against short-circuit and thermal overload. The rated current range for this device is 17 - 23 A, with a rated insulation voltage (Ui) of 690 V. It is designed for DIN rail or mounting plate installation, with a net width of 45 mm. Operation is facilitated through a push-button mechanism. The protection settings for short-circuit pickup current are fixed at 327A. The GV2ME213 has a rated impulse voltage (Uimp) of 6 kV and supports rated active powers of 9 kW at 400/415Vac and 11 kW at 500Vac. The trip current rating is 23 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 440Vac, AC-3, In/2 with load. Terminal connections are made via spring terminals. The rated voltage (AC) phase-to-phase is 690 V, with all 3 poles protected. The minimum and maximum currents are set at 17 A and 23 A, respectively, with a trip unit type of thermal-magnetic. It is categorized under utilisation category A AC-3.

Schneider Electric

FAQ

What is the price of GV2ME163?
Purchase the GV2ME163 from Powermatic Associates at the price of $230.48. Order today.

Out if stock but available for backorder.

Schneider Electric GV2ME163 is a Motor Protection Circuit Breaker (MPCB) within the GV2ME sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and offers protection functions against short-circuit and thermal overload. The rated current range for this device is 9 - 14 A, with a rated insulation voltage (Ui) of 690 V. It is designed for DIN rail mounting and has a net width of 45 mm. Operation is facilitated through a push-button mechanism. The protection settings for short-circuit pickup current are fixed at 170A. The GV2ME163 has a rated impulse voltage (Uimp) of 6 kV and supports rated active power outputs of 5.5 kW at 400/415Vac, 7.5 kW at 500Vac, and both 11 kW and 9 kW at 690Vac. Its trip current rating is 14 AT, with a frame current rating of 32 AF. The mechanical durability of the device is rated at 100,000 operations without load, and its electrical durability, under load conditions (440Vac; AC-3; In/2), is also 100,000 operations. It features spring type terminals, a rated voltage (AC) phase-to-phase of 690 V, and all three poles are protected. The minimum and maximum current ratings are 9 A and 14 A, respectively, with a thermal-magnetic trip unit type. It is categorized under utilisation category A AC-3.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock