BMI0703T12A Schneider Electric Electronic Components

Name: BMI0703T12A
Brand: Schneider Electric

Part#:BMI0703T12A

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Schneider Electric BMI0703T12A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder and a keyed shaft, alongside triple (3) motor stacks. The servo motor operates on a supply voltage of 115Vac-230Vac, including specific ratings of 120Vac, 200Vac, and 220Vac. It offers a degree of protection rated at IP54 and IP65, with a rated current of 3.55A at 1400rpm and 115Vac, and 2.82A at 3200rpm and 230Vac. The mounting mode is facilitated by a 70x70mm flange. Communication is enabled through the HIPERFACE protocol. The net width of the motor is 70 mm. It achieves rotational speeds of 1400rpm at 115Vac and 3200rpm at 230Vac, with rated active power of 0.4kW / 400W and 0.7kW / 700W, respectively. The maximum torque is 6.3Nm, with a stall torque of 2.88Nm, and operational torques of 2.9Nm at 1400rpm and 115Vac, and 2.2Nm at 3200rpm and 230Vac.

Product Details

Maximum Radial Force Fr
730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Nominal Output Power
700 W 230 V single phase 400 W 115 V single phase
Peak Stall Torque
76.12 lbf.in (8.6 N.m) 115 V single phase 76.12 lbf.in (8.6 N.m) 230 V single phase
Maximum Current Irms
17.8 A 115 V, single phase 17.8 A 230 V, single phase
Nominal Speed
3200 rpm 230 V single phase 1400 rpm 115 V single phase
Product Compatibility
Drive control unit LXM32i CANopen Drive control unit LXM32i EtherCAT
Distance Shaft Shoulder-Flange
0.10 in (2.5 mm)
Centring Collar Diameter
2.36 in (60 mm)
Length
11.81 in (300 mm)
Mounting Holes Diameter
0.22 in (5.5 mm)
Circle Diameter Of The Mounting Holes
2.95…3.23 in (75…82 mm)
Number Of Mounting Holes
4
Centring Collar Depth
0.10 in (2.5 mm)
Type Of Cooling
Natural convection
Maximum Axial Force Fa
0.2 x Fr
Stator Resistance
2.58 Ohm 68 °F (20 °C)
Stator Electrical Time Constant
0.88 ms 68 °F (20 °C)
Back Emf Constant
54.44 V/krpm 68 °F (20 °C)
Number Of Motor Stacks
3
Torque Constant
0.81 N.m/A 68 °F (20 °C)

Rotor Inertia

1.67 kg.cm²

Stator Inductance

2.28 mH 68 °F (20 °C)

Number Of Motor Poles

Electrical Connection

Printed circuit board connector

Key Width

0.20 in (5 mm)

Feedback Type

Absolute multiturn SinCos Hiperface

Shaft Length

1.18 in (30 mm)

Holding Brake

Without

Speed Feedback Resolution

131072 points/turn x 4096 turns

Motor Flange Size

2.76 in (70 mm)

Mounting Support

International standard flange

Second Shaft

Without second shaft end

Shaft Diameter

0.55 in (14 mm)

Nominal Torque

25.67 lbf.in (2.9 N.m) 115 V single phase 19.47 lbf.in (2.2 N.m) 230 V single phase

Shaft End

Keyed

Output Current 3S Peak

10.5 A 230 V 3 s

Continuous Stall Current

3.5 A

Continuous Stall Torque

30.09 lbf.in (3.4 N.m) 115...230 V single phase

Continuous Output Current

3.5 A 8 kHz

Network Frequency Limits

47.5…63 Hz

Supply Voltage Limits

100…240 V

EMC Filter

Integrated

Supply Frequency

50/60 Hz - 5...5 %

Phase

Single phase

[Us] Rated Supply Voltage

115...230 V - 15...10 %

Maximum Mechanical Speed

8000 rpm

Device Short Name

BMI

Product Or Component Type

Servo motor with power stage

Range Compatibility

Lexium 32i

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

BMI0703T12A Related Documents

Product Datasheet-1631036162351.pdf.pdf

Similar products from: Schneider Electric Electronic Components

Manufacturer warranty

BMI0703T12A Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.

Relevant products

BMI0702T12F

Verified stock: 0

Schneider Electric BMI0702T12F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a keyed shaft, a holding brake, and double (2) motor stacks. The supply voltage ranges from 115Vac to 230Vac, supporting 120Vac, 200Vac, and 220Vac. It offers a degree of protection rated at IP54 and IP65, with a rated current of 3.55A at 1700rpm and 115Vac, and 2.83A at 4000rpm and 230Vac. The mounting mode is a 70x70mm flange. It utilizes the HIPERFACE communication protocol, with a net width of 70 mm. The rotational speed is 1700rpm at 115Vac and 4000rpm at 230Vac. The rated active power is 0.4kW or 400W at 1700rpm and 115Vac, and 0.7kW or 700W at 4000rpm and 230Vac. It has a maximum torque of 4.84Nm, a stall torque of 2.24Nm, and a torque of 2.2Nm at 1700rpm and 115Vac, and 1.7Nm at 4000rpm and 230Vac.

Schneider Electric

BMI0702T01F

Verified stock: 0

Schneider Electric BMI0702T01F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and double (2) motor stacks. The servo motor operates on a supply voltage of 115Vac-230Vac, specifically at 120Vac, 200Vac, and 220Vac, and offers a degree of protection rated at IP54 and IP65. It has a rated current of 3.55A at 1700rpm with 115Vac and 2.83A at 4000rpm with 230Vac. The mounting mode is a 70x70mm flange. Communication is facilitated through the HIPERFACE protocol. The net width of the motor is 70 mm. It achieves a rotational speed of 1700rpm at 115Vac and 4000rpm at 230Vac, with rated active power of 0.4kW / 400W at 1700rpm with 115Vac and 0.7kW / 700W at 4000rpm with 230Vac. The maximum torque is 4.84Nm, with a stall torque of 2.24Nm, and operational torques of 2.2Nm at 1700rpm with 115Vac and 1.7Nm at 4000rpm with 230Vac.

Schneider Electric

BMI0703P12A

Verified stock: 0

Schneider Electric BMI0703P12A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a keyed shaft, and triple (3) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP54 and IP65. The rated current varies with speed and voltage: 2.1A at 1600rpm and 208Vac, 1.87A at 3300rpm and 400Vac, and 1.71A at 3800rpm and 480Vac. This motor is mounted using a 70x70mm flange and communicates via the HIPERFACE protocol. It has a net width of 70 mm. The rotational speed ranges from 1600rpm at 208Vac to 3800rpm at 480Vac. The rated active power is 0.49kW (490W) at 1600rpm and 208Vac, 0.89kW (890W) at 3300rpm and 400Vac, and 0.94kW (940W) at 3800rpm and 480Vac. Maximum torque is 8.06Nm, with stall torque at 2.96Nm. Torque performance is 2.93Nm at 1600rpm and 208Vac, 2.58Nm at 3300rpm and 400Vac, and 2.35Nm at 3800rpm and 480Vac. The moment of inertia is 1.67kg.cm2.

Schneider Electric

BMI0703T11F

Verified stock: 0

Schneider Electric BMI0703T11F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a keyed shaft, a holding brake, and triple (3) motor stacks. The servo motor operates on a supply voltage of 115Vac-230Vac (120Vac / 200Vac / 220Vac), offering a degree of protection rated at IP54 and IP65. It has a rated current of 3.55A at 1400rpm with 115Vac and 2.82A at 3200rpm with 230Vac. The mounting mode is a 70x70mm flange, and it uses the HIPERFACE communication protocol. The net width of the motor is 70 mm. Its rotational speed reaches 1400rpm at 115Vac and 3200rpm at 230Vac, with rated active power of 0.4kW / 400W at 1400rpm with 115Vac and 0.7kW / 700W at 3200rpm with 230Vac. The maximum torque is 6.3Nm, stall torque is 2.88Nm, and it delivers a torque of 2.9Nm at 1400rpm with 115Vac and 2.2Nm at 3200rpm with 230Vac.

Schneider Electric

BMI0702P01A

Verified stock: 0

Schneider Electric BMI0702P01A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a smooth shaft, and double (2) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including 220Vac, 240Vac, and 400Vac options. It offers a degree of protection rated at IP54 and IP65. The rated current varies with speed and voltage: 1.95A at 1800rpm with 208Vac, 1.8A at 3600rpm with 400Vac, and 1.80A at 4400rpm with 480Vac. It is mounted via a 70x70mm flange and uses the HIPERFACE communication protocol. The net width of the motor is 70 mm. Its rotational speeds are 1800rpm at 208Vac, 3600rpm at 400Vac, and 4400rpm at 480Vac, with rated active powers of 0.42kW/420W, 0.76kW/760W, and 0.93kW/930W, respectively. The maximum torque is 6.42Nm, with a stall torque of 2.24Nm. The torque output is 2.21Nm at 1800rpm with 208Vac, 2.02Nm at 3600rpm with 400Vac, and 2.01Nm at 4400rpm with 480Vac. The moment of inertia is 1.13kg.cm2.

Schneider Electric

BMI0703P02F

Verified stock: 4

Schneider Electric BMI0703P02F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and triple (3) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP54 and IP65, with a rated current of 2.1A at 1600rpm and 208Vac, 1.87A at 3300rpm and 400Vac, and 1.71A at 3800rpm and 480Vac. The mounting mode is a 70x70mm flange, and it uses the HIPERFACE communication protocol. The net width of the motor is 70 mm. Its rotational speed varies with supply voltage, achieving 1600rpm at 208Vac, 3300rpm at 400Vac, and 3800rpm at 480Vac. The rated active power is 0.49kW / 490W at 1600rpm and 208Vac, 0.89kW / 890W at 3300rpm and 400Vac, and 0.94kW / 940W at 3800rpm and 480Vac. The maximum torque is 8.06Nm, with a stall torque of 2.96Nm, and operational torques of 2.93Nm at 1600rpm and 208Vac, 2.58Nm at 3300rpm and 400Vac, and 2.35Nm at 3800rpm and 480Vac. The moment of inertia is 1.78kg.cm.

Schneider Electric

BMI0702T21F

Verified stock: 0

Schneider Electric BMI0702T21F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and double (2) motor stacks. The servo motor operates on a supply voltage of 115Vac-230Vac (120Vac / 200Vac / 220Vac) and offers a degree of protection of IP65. It has a rated current of 3.55A at 1700rpm with 115Vac and 2.83A at 4000rpm with 230Vac. The mounting mode is a 70x70mm flange, and it uses the HIPERFACE communication protocol. The net width of the motor is 70 mm. Its rotational speed reaches up to 1700rpm at 115Vac and 4000rpm at 230Vac, with rated active power of 0.4kW / 400W at 1700rpm with 115Vac and 0.7kW / 700W at 4000rpm with 230Vac. The maximum torque is 4.84Nm, with a stall torque of 2.24Nm, and it delivers a torque of 2.2Nm at 1700rpm with 115Vac and 1.7Nm at 4000rpm with 230Vac.

Schneider Electric

BMI0702T12A

Verified stock: 0

Schneider Electric BMI0702T12A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder and a keyed shaft with double (2) motor stacks. The servo motor operates on a supply voltage of 115Vac-230Vac, including specific ratings of 120Vac, 200Vac, and 220Vac. It offers a degree of protection rated at IP54 and IP65, with a rated current of 3.55A at 1700rpm and 115Vac, and 2.83A at 4000rpm and 230Vac. The mounting mode is specified as a 70x70mm flange. Communication is facilitated through the HIPERFACE protocol. The net width of the motor is 70 mm. It achieves rotational speeds of 1700rpm at 115Vac and 4000rpm at 230Vac, with rated active power of 0.4kW / 400W at 1700rpm and 115Vac, and 0.7kW / 700W at 4000rpm and 230Vac. The maximum torque is 4.84Nm, with a stall torque of 2.24Nm, and operational torques of 2.2Nm at 1700rpm and 115Vac, and 1.7Nm at 4000rpm and 230Vac.

Schneider Electric