2966171 Phoenix Contact Control Relays

2966171 on Powermatic Associates
Phoenix Contact

Part#:2966171

Manufacturer:Phoenix Contact

Category:Control Relays

Product Lifecycle:Active

40 in stock

Mar 14, 2025

Product description

PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 24 V DC6.2 mm PLC basic terminal block with screw

Product Details

  • Type of note
    Notes on operation
  • Depth
    94 mm
  • Typical response time
    5 ms
  • Degree of protection
    RT III (Relay)
  • Type of switch contact
    Single contact
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Typical input current at UN
    9 mA
  • Overvoltage category
    III
  • Width
    6.2 mm
  • Nominal input voltage UN
    24 V DC
  • Power dissipation for nominal condition
    0.22 W
  • Contact material
    AgSnO
  • Interrupting rating (ohmic load) max.
    140 W (at 24 V DC)
  • Test voltage
    4 kV AC (50 Hz, 1 min., winding/contact)
  • Connection method
    Screw connection
  • Designation
    Corrosive gas test
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 5.1
    27371600
  • ECLASS 9.0
    27371601
  • ETIM 7.0
    EC001437
  • UNSPSC 19.0
    39122334
  • UNSPSC 21.0
    39122334
  • Height
    80 mm
  • Protective circuit
    Reverse polarity protection Polarity protection diode
  • Maximum switching voltage
    250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
  • Limiting continuous current
    6 A
  • Operating mode
    100% operating factor
  • Conductor cross section solid
    0.14 mm² ... 2.5 mm²
  • Connection in acc. with standard
    CUL
  • ECLASS 11.0
    27371601
  • ECLASS 7.0
    27371601
  • UNSPSC 6.01
    30211916
  • UNSPSC 12.01
    39121515
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Maximum inrush current
    10 A (4 s)
  • Mechanical service life
    2x 107 cycles
  • Screw thread
    M3
  • Stripping length
    8 mm
  • Standards/regulations
    IEC 60664
  • ECLASS 4.0
    27371100
  • ECLASS 5.0
    27371600
  • ETIM 3.0
    EC001437
  • UNSPSC 11
    39121515
  • UNSPSC 18.0
    39122334
  • Note
    Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
  • Ambient temperature (operation)
    -40 °C ... 60 °C
  • Typical release time
    8 ms
  • Contact type
    1 changeover contact
  • Min. switching current
    10 mA (at 12 V)
  • Flammability rating according to UL 94
    V0 (Housing)
  • Assembly instructions
    In rows with zero spacing
  • Conductor cross section AWG
    26 ... 14
  • Identification
    ISA-S71.04. G3 Harsh Group
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 6.0
    27371600
  • ETIM 2.0
    EC001437
  • ETIM 6.0
    EC001437
  • UNSPSC 13.2
    39122334
  • Operating voltage display
    Yellow LED
  • Minimum switching voltage
    5 V (at 100 mA)
  • Switching capacity
    2 A (at 24 V, DC13)
  • Mounting position
    any
  • Connection name
    Contact side
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Pollution degree
    3
  • ECLASS 10.0.1
    27371601
  • ECLASS 4.1
    27371100
  • ETIM 4.0
    EC001437
  • UNSPSC 7.0901
    39121515
  • UNSPSC 20.0
    39122334

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.


Manufacturer warranty

2966171 Phoenix Contact

Get a quick Quote!

Request a quote, and we will send you price within minutes.

Stock:

40

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery


Secure Payment Processing


Warranty


Responsive Customer Support

Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 2966171 with other products

Type of note

Depth

Typical response time

Degree of protection

Type of switch contact

Utilization restriction

Typical input current at ...

Overvoltage category

Width

Nominal input voltage UN

Power dissipation for nom...

Contact material

Interrupting rating (ohmi...

Test voltage

Connection method

Designation

REACh SVHC

ECLASS 5.1

ECLASS 9.0

ETIM 7.0

UNSPSC 19.0

UNSPSC 21.0

Height

Protective circuit

Maximum switching voltage

Limiting continuous curre...

Operating mode

Conductor cross section s...

Connection in acc. with s...

ECLASS 11.0

ECLASS 7.0

UNSPSC 6.01

UNSPSC 12.01

Ambient temperature (stor...

Maximum inrush current

Mechanical service life

Screw thread

Stripping length

Standards/regulations

ECLASS 4.0

ECLASS 5.0

ETIM 3.0

UNSPSC 11

UNSPSC 18.0

Note

Ambient temperature (oper...

Typical release time

Contact type

Min. switching current

Flammability rating accor...

Assembly instructions

Conductor cross section A...

Identification

China RoHS

ECLASS 6.0

ETIM 2.0

ETIM 6.0

UNSPSC 13.2

Operating voltage display

Minimum switching voltage

Switching capacity

Mounting position

Connection name

Conductor cross section f...

Pollution degree

ECLASS 10.0.1

ECLASS 4.1

ETIM 4.0

UNSPSC 7.0901

UNSPSC 20.0

Insulation

Rated surge voltage

Selected product

2966171
40 in stock
2966171
Phoenix Contact

PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in mi...

Type of noteNotes on operation

Depth94 mm

Typical response time5 ms

Degree of protectionRT III (Relay)

Type of switch contactSingle contact

Utilization restrictionEMC: class A product, see ma...

Typical input current at UN9 mA

Overvoltage categoryIII

Width6.2 mm

Nominal input voltage UN24 V DC

Power dissipation for nominal condition0.22 W

Contact materialAgSnO

Interrupting rating (ohmic load) max.140 W (at 24 V DC)

Test voltage4 kV AC (50 Hz, 1 min., wind...

Connection methodScrew connection

DesignationCorrosive gas test

REACh SVHCLead 7439-92-1

ECLASS 5.127371600

ECLASS 9.027371601

ETIM 7.0EC001437

UNSPSC 19.039122334

UNSPSC 21.039122334

Height80 mm

Protective circuitReverse polarity protection ...

Maximum switching voltage250 V AC/DC (The separating ...

Limiting continuous current6 A

Operating mode100% operating factor

Conductor cross section solid0.14 mm² ... 2.5 mm²

Connection in acc. with standardCUL

ECLASS 11.027371601

ECLASS 7.027371601

UNSPSC 6.0130211916

UNSPSC 12.0139121515

Ambient temperature (storage/transport)-40 °C ... 85 °C

Maximum inrush current10 A (4 s)

Mechanical service life2x 107 cycles

Screw threadM3

Stripping length8 mm

Standards/regulationsIEC 60664

ECLASS 4.027371100

ECLASS 5.027371600

ETIM 3.0EC001437

UNSPSC 1139121515

UNSPSC 18.039122334

NoteSeparating plate PLC-ATP mus...

Ambient temperature (operation)-40 °C ... 60 °C

Typical release time8 ms

Contact type1 changeover contact

Min. switching current10 mA (at 12 V)

Flammability rating according to UL 94V0 (Housing)

Assembly instructionsIn rows with zero spacing

Conductor cross section AWG26 ... 14

IdentificationISA-S71.04. G3 Harsh Group

China RoHSEnvironmentally Friendly Use...

ECLASS 6.027371600

ETIM 2.0EC001437

ETIM 6.0EC001437

UNSPSC 13.239122334

Operating voltage displayYellow LED

Minimum switching voltage5 V (at 100 mA)

Switching capacity2 A (at 24 V, DC13)

Mounting positionany

Connection nameContact side

Conductor cross section flexible0.14 mm² ... 2.5 mm²

Pollution degree3

ECLASS 10.0.127371601

ECLASS 4.127371100

ETIM 4.0EC001437

UNSPSC 7.090139121515

UNSPSC 20.039122334

Insulation-

Rated surge voltage-

2966265
3 in stock
2966265
Phoenix Contact

PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in mi...

Type of note-

Depth94 mm

Typical response time5 ms

Degree of protectionIP20 (Relay base)

Type of switch contactSingle contact

Utilization restrictionEMC: class A product, see ma...

Typical input current at UN9 mA

Overvoltage categoryIII

Width6.2 mm

Nominal input voltage UN24 V DC

Power dissipation for nominal condition0.22 W

Contact materialAgSnO, hard gold-plated

Interrupting rating (ohmic load) max.140 W (at 24 V DC)

Test voltage4 kV AC (50 Hz, 1 min., wind...

Connection methodScrew connection

DesignationCorrosive gas test

REACh SVHCLead 7439-92-1

ECLASS 5.127371600

ECLASS 9.027371601

ETIM 7.0EC001437

UNSPSC 19.039122334

UNSPSC 21.039122334

Height80 mm

Protective circuitReverse polarity protection ...

Maximum switching voltage250 V AC/DC

Limiting continuous current6 A

Operating mode100% operating factor

Conductor cross section solid0.14 mm² ... 2.5 mm²

Connection in acc. with standardCUL

ECLASS 11.027371601

ECLASS 7.027371601

UNSPSC 6.0130211916

UNSPSC 12.0139121515

Ambient temperature (storage/transport)-40 °C ... 85 °C

Maximum inrush current50 mA

Mechanical service life2x 107 cycles

Screw threadM3

Stripping length8 mm

Standards/regulationsIEC 60664

ECLASS 4.027371100

ECLASS 5.027371600

ETIM 3.0EC001437

UNSPSC 1139121515

UNSPSC 18.039122334

Notethe following values are app...

Ambient temperature (operation)-40 °C ... 60 °C

Typical release time8 ms

Contact type1 changeover contact

Min. switching current10 mA (at 12 V)

Flammability rating according to UL 94V0 (Housing)

Assembly instructionsIn rows with zero spacing

Conductor cross section AWG26 ... 14

IdentificationISA-S71.04. G3 Harsh Group

China RoHSEnvironmentally Friendly Use...

ECLASS 6.027371600

ETIM 2.0EC001437

ETIM 6.0EC001437

UNSPSC 13.239122334

Operating voltage displayYellow LED

Minimum switching voltage5 V (at 100 mA)

Switching capacity2 A (at 24 V, DC13)

Mounting positionany

Connection nameContact side

Conductor cross section flexible0.14 mm² ... 2.5 mm²

Pollution degree3

ECLASS 10.0.127371601

ECLASS 4.127371100

ETIM 4.0EC001437

UNSPSC 7.090139121515

UNSPSC 20.039122334

Insulation-

Rated surge voltage-

2967125
5 in stock
2967125
Phoenix Contact

PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in mi...

Type of note-

Depth94 mm

Typical response time8 ms

Degree of protectionRT III (Relay)

Type of switch contactSingle contact

Utilization restrictionEMC: class A product, see ma...

Typical input current at UN18 mA

Overvoltage categoryIII

Width14 mm

Nominal input voltage UN24 V DC

Power dissipation for nominal condition0.43 W

Contact materialAgNi, hard gold-plated

Interrupting rating (ohmic load) max.140 W (at 24 V DC)

Test voltage4 kV AC (50 Hz, 1 min., wind...

Connection methodScrew connection

DesignationCorrosive gas test

REACh SVHCLead 7439-92-1

ECLASS 5.127371600

ECLASS 9.027371601

ETIM 7.0EC001437

UNSPSC 19.039122334

UNSPSC 21.039122334

Height80 mm

Protective circuitReverse polarity protection ...

Maximum switching voltage250 V AC/DC

Limiting continuous current6 A

Operating mode100% operating factor

Conductor cross section solid0.14 mm² ... 2.5 mm²

Connection in acc. with standardCUL

ECLASS 11.027371601

ECLASS 7.027371601

UNSPSC 6.0130211916

UNSPSC 12.0139121515

Ambient temperature (storage/transport)-40 °C ... 85 °C

Maximum inrush current15 A (300 ms)

Mechanical service life3x 107 cycles

Screw threadM3

Stripping length8 mm

Standards/regulationsIEC 60664

ECLASS 4.027371100

ECLASS 5.027371600

ETIM 3.0EC001437

UNSPSC 1139121515

UNSPSC 18.039122334

Notethe following values are app...

Ambient temperature (operation)-40 °C ... 60 °C

Typical release time10 ms

Contact type2 changeover contacts

Min. switching current10 mA

Flammability rating according to UL 94V0 (Housing)

Assembly instructionsIn rows with zero spacing

Conductor cross section AWG26 ... 14

IdentificationISA-S71.04. G3 Harsh Group

China RoHSEnvironmentally Friendly Use...

ECLASS 6.027371600

ETIM 2.0EC001437

ETIM 6.0EC001437

UNSPSC 13.239122334

Operating voltage displayYellow LED

Minimum switching voltage5 V AC/DC

Switching capacity2 A (at 24 V, DC13)

Mounting positionany

Connection nameContact side

Conductor cross section flexible0.14 mm² ... 2.5 mm²

Pollution degree2

ECLASS 10.0.127371601

ECLASS 4.127371100

ETIM 4.0EC001437

UNSPSC 7.090139121515

UNSPSC 20.039122334

InsulationBasic insulation

Rated surge voltage6 kV

About the manufacturer

Phoenix Contact

Powermatic Associates is an authorized Phoenix Contact distributor, proudly offering a wide array of innovative industrial solutions that cater to modern technological demands. Phoenix Contact is a global leader renowned for its high-quality products in the fields of electrical engineering and automation technology. Their extensive catalog encompasses everything from connection technology, interface systems, and surge protection to automation software and control technology, making them a versatile choice for various industrial applications. At Powermatic Associates, we deliver Phoenix Contact’s pioneering connectivity and power management solutions, which include terminal blocks, connectors, relays, and PLCs. These components are essential for creating efficient and reliable electrical connections in diverse environments, ensuring seamless system integration. The company's comprehensive range of Industrial Internet of Things (IIoT) solutions facilitates intelligent networking, enabling customers to optimize their automation processes with cutting-edge technology. Phoenix Contact's emphasis on sustainability and innovation reflects in their energy management systems and renewable energy solutions. By incorporating these into your operations, you not only enhance efficiency but also contribute to sustainable practices, aligning with modern environmental standards. Powermatic Associates recognizes the significance of such advancements and partners with Phoenix Contact to provide expert engineering support and tailored solutions, helping you implement smart technologies that drive productivity and minimize costs. With a focus on safety and reliability, Phoenix Contact offers advanced surge protection devices and signal conditioners that safeguard your equipment against voltage spikes and ensure data integrity. In collaboration with Powermatic Associates, customers gain access to robust technical support and consultation, ensuring that every project benefits from personalized guidance and quick resolution of technical challenges. Our partnership extends the reach of Phoenix Contact’s globally recognized industrial automation products, including Human Machine Interfaces (HMIs) and Ethernet switches, empowering businesses with enhanced operational control and communication capabilities. Customers can trust Powermatic Associates to deliver prompt shipping and thorough assistance, ensuring that Phoenix Contact’s top-tier products are seamlessly integrated into their workflows for optimal performance.

Recently viewed products

Relevant products

FAQ

40 in stock

PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 24 V DC6.2 mm PLC basic terminal block with screw

Similar products from: Control Relays

What can I help you find today?

Recommended parts