2708999 Phoenix Contact Data & Networking Devices

Connection methodScrew connection

Max. AWG conductor cross section, flexible10

Additional text-

ECLASS 10.0.127141120

ECLASS 5.127141100

ECLASS 9.027141120

UNSPSC 20.039121410

Max. cable diameter-

Altitude-

Insertion/withdrawal cycles-

Pin assignment-

ETIM 3.0EC000897

UNSPSC 7.090139121410

Conductor cross section solid min.0.14 mm²

Stripping length9 mm

ECLASS 4.027141100

ETIM 4.0EC000897

UNSPSC 1139121410

UNSPSC 18.039121410

Width6.2 mm

Nominal voltage UN1000 V

Bus system-

Housing material-

Conductor cross section flexible max.6 mm²

China RoHSEnvironmentally Friendly Use...

Connection in acc. with standardCSA

ECLASS 6.027141100

ETIM 2.0EC000897

UNSPSC 6.0130211811

Height46.9 mm

Degree of protection-

Signal-

Number of positions-

Conductor cross section flexible min.0.14 mm²

UNSPSC 13.239121410

Min. AWG conductor cross section, flexible26

Conductor cross section AWG max.10

Termination resistor-

ECLASS 4.127141100

ECLASS 5.027141100

ETIM 7.0EC000897

Min. cable diameter-

Ambient temperature (operation)-

Nominal current IN32 A (with 4 mm² conductor c...

Connection-

Conductor cross section solid max.6 mm²

Designation-

Free from substances that could impair the application of coating-

UNSPSC 19.039121410

Conductor cross section AWG min.26

Identification-

ECLASS 11.027141120

Utilization restriction-

Length47.7 mm

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

SUBCON fixing screws-

Tightening torque-

MTTF-

ECLASS 7.027141120

ETIM 6.0EC000897

UNSPSC 12.0139121410

UNSPSC 21.039121410

Colorgray

Flammability rating according to UL 94V0

Rated surge voltage8 kV

Back of the hand protectionguaranteed

Potentials1

Degree of pollution3

Result of power-frequency withstand voltage testTest passed

Result of flexion and pull-out testTest passed

Number of connections2

Area of applicationRailway industry

Finger protectionguaranteed

Result of surge voltage testTest passed

Bending test turns135

Tight fit on carrierNS 35

Setpoint1 N

Short-time current0.72 kA

Bending test rotation speed10 rpm

ASD level1.857 (m/s2)2/Hz

Shock formHalf-sine

Shock test resultTest passed

Result of voltage-drop testTest passed

Overvoltage categoryIII

Power frequency withstand voltage setpoint2.2 kV

Result of temperature-rise testTest passed

Number of levels1

Insulating materialPA

Open side panelYes

Result of tight fit on supportTest passed

Proof of thermal characteristics (needle flame) effective duration30 s

Nominal cross section4 mm²

Insulating material groupI

Maximum load current41 A (with 6 mm² conductor c...

Acceleration5g

Height NS 35/1555 mm

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Test duration per axis5 h

Short circuit stability resultTest passed

Oscillation, broadband noise test resultTest passed

Shock duration30 ms

Number of shocks per direction3

Surface flammability NFPA 130 (ASTM E 162)passed

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Maximum power dissipation for nominal condition1.02 W

Tensile test resultTest passed

Result of thermal testTest passed

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Requirement temperature-rise testIncrease in temperature ≤ 45...

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Test spectrumService life test category 1...

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Height NS 35/7,547.5 mm

Screw threadM3

Conductor cross section short circuit testing6 mm²

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Static insulating material application in cold-60 °C

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Tightening torque max0.8 Nm

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max.4 mm²

2 conductors with same cross section, stranded min.0.14 mm²

Ambient temperature (actuation)-5 °C ... 70 °C

Test directionsX-, Y- and Z-axis (pos. and ...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Tightening torque, min0.6 Nm

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum2.5 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Permissible humidity (storage/transport)30 % ... 70 %

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

Smoke gas toxicity NFPA 130 (SMP 800C)passed

End cover width2.2 mm

2 conductors with same cross section, solid max.1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

Ambient temperature (assembly)-5 °C ... 70 °C

Conductor cross section flexible, with ferrule with plastic sleeve max.4 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Internal cylindrical gageA4

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

2 conductors with same cross section, solid min.0.14 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

NoteNote: Product releases, conn...

Connection methodScrew connection

Max. AWG conductor cross section, flexible18

Additional textPlease follow the special in...

ECLASS 10.0.127440302

ECLASS 5.127143400

ECLASS 9.027440302

UNSPSC 20.039121522

Max. cable diameter8.4 mm

Altitude≤ 5000 m (For restrictions, ...

Insertion/withdrawal cycles> 200

Pin assignment2, 3, 7, 9

ETIM 3.0EC001132

UNSPSC 7.090139121402

Conductor cross section solid min.0.14 mm²

Stripping length5 mm

ECLASS 4.027140800

ETIM 4.0EC001132

UNSPSC 1139121402

UNSPSC 18.039121522

Width16.6 mm

Nominal voltage UN5 V

Bus systemCAN, CANopen, SafetyBus-P

Housing materialABS, metal-plated

Conductor cross section flexible max.1 mm²

China RoHSEnvironmentally Friendly Use...

Connection in acc. with standardCUL

ECLASS 6.027143400

ETIM 2.0EC001132

UNSPSC 6.0130211802

Height39.4 mm

Degree of protectionIP40

SignalCAN

Number of positions9

Conductor cross section flexible min.0.14 mm²

UNSPSC 13.239121522

Min. AWG conductor cross section, flexible26

Conductor cross section AWG max.16

Termination resistor120 Ω (Can be connected exte...

ECLASS 4.127140800

ECLASS 5.027143400

ETIM 7.0EC001132

Min. cable diameter7.6 mm

Ambient temperature (operation)-20 °C ... 75 °C

Nominal current IN100 mA

ConnectionPCB connection

Conductor cross section solid max.1.5 mm²

DesignationCorrosive gas test

Free from substances that could impair the application of coatingaccording to P-VW 3.10.7 57 ...

UNSPSC 19.039121522

Conductor cross section AWG min.26

IdentificationISA-S71.04-1985 G3 Harsh Gro...

ECLASS 11.027440302

Utilization restrictionUse in potentially explosive...

Length58 mm

Ambient temperature (storage/transport)-25 °C ... 80 °C

SUBCON fixing screws4-40 UNC

Tightening torque0.4 Nm

MTTF6706 Years (SN 29500 standar...

ECLASS 7.027440302

ETIM 6.0EC001132

UNSPSC 12.0139121402

UNSPSC 21.039121522

Color-

Flammability rating according to UL 94-

Rated surge voltage-

Back of the hand protection-

Potentials-

Degree of pollution-

Result of power-frequency withstand voltage test-

Result of flexion and pull-out test-

Number of connections-

Area of application-

Finger protection-

Result of surge voltage test-

Bending test turns-

Tight fit on carrier-

Setpoint-

Short-time current-

Bending test rotation speed-

ASD level-

Shock form-

Shock test result-

Result of voltage-drop test-

Overvoltage category-

Power frequency withstand voltage setpoint-

Result of temperature-rise test-

Number of levels-

Insulating material-

Open side panel-

Result of tight fit on support-

Proof of thermal characteristics (needle flame) effective duration-

Nominal cross section-

Insulating material group-

Maximum load current-

Acceleration-

Height NS 35/15-

Shock protection test specification-

Test duration per axis-

Short circuit stability result-

Oscillation, broadband noise test result-

Shock duration-

Number of shocks per direction-

Surface flammability NFPA 130 (ASTM E 162)-

Fire protection for rail vehicles (DIN EN 45545-2) R24-

Maximum power dissipation for nominal condition-

Tensile test result-

Result of thermal test-

Test specification, shock test-

Bending test conductor cross section/weight-

Result of the test for mechanical stability of terminal points (5 x conductor connection)-

Requirement temperature-rise test-

Test frequency-

Test spectrum-

Relative insulation material temperature index (Elec., UL 746 B)-

Calorimetric heat release NFPA 130 (ASTM E 1354)-

Fire protection for rail vehicles (DIN EN 45545-2) R23-

Height NS 35/7,5-

Screw thread-

Conductor cross section short circuit testing-

Test specification, oscillation, broadband noise-

Static insulating material application in cold-

Fire protection for rail vehicles (DIN EN 45545-2) R26-

Tightening torque max-

Conductor cross section flexible, with ferrule without plastic sleeve min.-

Conductor cross section flexible, with ferrule without plastic sleeve max.-

2 conductors with same cross section, stranded min.-

Ambient temperature (actuation)-

Test directions-

Specific optical density of smoke NFPA 130 (ASTM E 662)-

Fire protection for rail vehicles (DIN EN 45545-2) R22-

Tightening torque, min-

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum-

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum-

Permissible humidity (storage/transport)-

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))-

Smoke gas toxicity NFPA 130 (SMP 800C)-

End cover width-

2 conductors with same cross section, solid max.-

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum-

Ambient temperature (assembly)-

Conductor cross section flexible, with ferrule with plastic sleeve max.-

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum-

Internal cylindrical gage-

Conductor cross section flexible, with ferrule with plastic sleeve min.-

2 conductors with same cross section, solid min.-

2 conductors with same cross section, stranded max.-

Operating temperature-

Note-

Connection methodScrew connection

Max. AWG conductor cross section, flexible12

Additional text-

ECLASS 10.0.127141120

ECLASS 5.127141100

ECLASS 9.027141120

UNSPSC 20.039121410

Max. cable diameter-

Altitude-

Insertion/withdrawal cycles-

Pin assignment-

ETIM 3.0EC000901

UNSPSC 7.090139121410

Conductor cross section solid min.0.14 mm²

Stripping length9 mm

ECLASS 4.027141100

ETIM 4.0EC000897

UNSPSC 1139121410

UNSPSC 18.039121410

Width5.2 mm

Nominal voltage UN500 V

Bus system-

Housing material-

Conductor cross section flexible max.4 mm²

China RoHSEnvironmentally Friendly Use...

Connection in acc. with standardCSA

ECLASS 6.027141100

ETIM 2.0EC000901

UNSPSC 6.0130211811

Height46.9 mm

Degree of protection-

Signal-

Number of positions-

Conductor cross section flexible min.0.14 mm²

UNSPSC 13.239121410

Min. AWG conductor cross section, flexible26

Conductor cross section AWG max.12

Termination resistor-

ECLASS 4.127141100

ECLASS 5.027141100

ETIM 7.0EC000897

Min. cable diameter-

Ambient temperature (operation)-

Nominal current IN24 A

Connection-

Conductor cross section solid max.4 mm²

Designation-

Free from substances that could impair the application of coating-

UNSPSC 19.039121410

Conductor cross section AWG min.26

Identification-

ECLASS 11.027141120

Utilization restriction-

Length65.4 mm

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

SUBCON fixing screws-

Tightening torque-

MTTF-

ECLASS 7.027141120

ETIM 6.0EC000897

UNSPSC 12.0139121410

UNSPSC 21.039121410

Colorgray

Flammability rating according to UL 94V0

Rated surge voltage6 kV

Back of the hand protectionguaranteed

Potentials1

Degree of pollution3

Result of power-frequency withstand voltage testTest passed

Result of flexion and pull-out testTest passed

Number of connections4

Area of applicationRailway industry

Finger protectionguaranteed

Result of surge voltage testTest passed

Bending test turns135

Tight fit on carrierNS 35

Setpoint1 N

Short-time current0.48 kA

Bending test rotation speed10 rpm

ASD level1.857 (m/s2)2/Hz

Shock formHalf-sine

Shock test resultTest passed

Result of voltage-drop testTest passed

Overvoltage categoryIII

Power frequency withstand voltage setpoint1.89 kV

Result of temperature-rise testTest passed

Number of levels1

Insulating materialPA

Open side panelYes

Result of tight fit on supportTest passed

Proof of thermal characteristics (needle flame) effective duration30 s

Nominal cross section2.5 mm²

Insulating material groupI

Maximum load current30 A (in case of a 4 mm² con...

Acceleration5g

Height NS 35/1555 mm

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Test duration per axis5 h

Short circuit stability resultTest passed

Oscillation, broadband noise test resultTest passed

Shock duration30 ms

Number of shocks per direction3

Surface flammability NFPA 130 (ASTM E 162)passed

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Maximum power dissipation for nominal condition0.77 W

Tensile test resultTest passed

Result of thermal testTest passed

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Requirement temperature-rise testIncrease in temperature ≤ 45...

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Test spectrumService life test category 1...

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Height NS 35/7,547.5 mm

Screw threadM3

Conductor cross section short circuit testing4 mm²

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Static insulating material application in cold-60 °C

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Tightening torque max0.6 Nm

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max.2.5 mm²

2 conductors with same cross section, stranded min.0.14 mm²

Ambient temperature (actuation)-5 °C ... 70 °C

Test directionsX-, Y- and Z-axis (pos. and ...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Tightening torque, min0.5 Nm

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum1 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Permissible humidity (storage/transport)30 % ... 70 %

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

Smoke gas toxicity NFPA 130 (SMP 800C)passed

End cover width2.2 mm

2 conductors with same cross section, solid max.1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

Ambient temperature (assembly)-5 °C ... 70 °C

Conductor cross section flexible, with ferrule with plastic sleeve max.2.5 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Internal cylindrical gageA3

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

2 conductors with same cross section, solid min.0.14 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

Note-

Connection methodScrew connection

Max. AWG conductor cross section, flexible10

Additional text-

ECLASS 10.0.127141120

ECLASS 5.127141100

ECLASS 9.027141120

UNSPSC 20.039121410

Max. cable diameter-

Altitude-

Insertion/withdrawal cycles-

Pin assignment-

ETIM 3.0EC000897

UNSPSC 7.090139121410

Conductor cross section solid min.0.14 mm²

Stripping length9 mm

ECLASS 4.027141100

ETIM 4.0EC000897

UNSPSC 1139121410

UNSPSC 18.039121410

Width6.2 mm

Nominal voltage UN1000 V

Bus system-

Housing material-

Conductor cross section flexible max.6 mm²

China RoHSEnvironmentally Friendly Use...

Connection in acc. with standardCSA

ECLASS 6.027141100

ETIM 2.0EC000897

UNSPSC 6.0130211811

Height46.9 mm

Degree of protection-

Signal-

Number of positions-

Conductor cross section flexible min.0.14 mm²

UNSPSC 13.239121410

Min. AWG conductor cross section, flexible26

Conductor cross section AWG max.10

Termination resistor-

ECLASS 4.127141100

ECLASS 5.027141100

ETIM 7.0EC000897

Min. cable diameter-

Ambient temperature (operation)-

Nominal current IN32 A (with 4 mm² conductor c...

Connection-

Conductor cross section solid max.6 mm²

Designation-

Free from substances that could impair the application of coating-

UNSPSC 19.039121410

Conductor cross section AWG min.26

Identification-

ECLASS 11.027141120

Utilization restriction-

Length47.7 mm

Ambient temperature (storage/transport)-25 °C ... 60 °C (for a shor...

SUBCON fixing screws-

Tightening torque-

MTTF-

ECLASS 7.027141120

ETIM 6.0EC000897

UNSPSC 12.0139121410

UNSPSC 21.039121410

Colorgray

Flammability rating according to UL 94V0

Rated surge voltage8 kV

Back of the hand protectionguaranteed

Potentials1

Degree of pollution3

Result of power-frequency withstand voltage testTest passed

Result of flexion and pull-out testTest passed

Number of connections2

Area of applicationRailway industry

Finger protectionguaranteed

Result of surge voltage testTest passed

Bending test turns135

Tight fit on carrierNS 35

Setpoint1 N

Short-time current0.72 kA

Bending test rotation speed10 rpm

ASD level1.857 (m/s2)2/Hz

Shock formHalf-sine

Shock test resultTest passed

Result of voltage-drop testTest passed

Overvoltage categoryIII

Power frequency withstand voltage setpoint2.2 kV

Result of temperature-rise testTest passed

Number of levels1

Insulating materialPA

Open side panelYes

Result of tight fit on supportTest passed

Proof of thermal characteristics (needle flame) effective duration30 s

Nominal cross section4 mm²

Insulating material groupI

Maximum load current41 A (with 6 mm² conductor c...

Acceleration5g

Height NS 35/1555 mm

Shock protection test specificationDIN EN 50274 (VDE 0660-514):...

Test duration per axis5 h

Short circuit stability resultTest passed

Oscillation, broadband noise test resultTest passed

Shock duration30 ms

Number of shocks per direction3

Surface flammability NFPA 130 (ASTM E 162)passed

Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3

Maximum power dissipation for nominal condition1.02 W

Tensile test resultTest passed

Result of thermal testTest passed

Test specification, shock testDIN EN 50155 (VDE 0115-200):...

Bending test conductor cross section/weight0.14 mm² / 0.2 kg

Result of the test for mechanical stability of terminal points (5 x conductor connection)Test passed

Requirement temperature-rise testIncrease in temperature ≤ 45...

Test frequencyf1 = 5 Hz to f2 = 150 Hz

Test spectrumService life test category 1...

Relative insulation material temperature index (Elec., UL 746 B)130 °C

Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3

Height NS 35/7,547.5 mm

Screw threadM3

Conductor cross section short circuit testing6 mm²

Test specification, oscillation, broadband noiseDIN EN 50155 (VDE 0115-200):...

Static insulating material application in cold-60 °C

Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3

Tightening torque max0.8 Nm

Conductor cross section flexible, with ferrule without plastic sleeve min.0.14 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max.4 mm²

2 conductors with same cross section, stranded min.0.14 mm²

Ambient temperature (actuation)-5 °C ... 70 °C

Test directionsX-, Y- and Z-axis (pos. and ...

Specific optical density of smoke NFPA 130 (ASTM E 662)passed

Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3

Tightening torque, min0.6 Nm

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum2.5 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum1.5 mm²

Permissible humidity (storage/transport)30 % ... 70 %

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C

Smoke gas toxicity NFPA 130 (SMP 800C)passed

End cover width2.2 mm

2 conductors with same cross section, solid max.1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum0.5 mm²

Ambient temperature (assembly)-5 °C ... 70 °C

Conductor cross section flexible, with ferrule with plastic sleeve max.4 mm²

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum0.14 mm²

Internal cylindrical gageA4

Conductor cross section flexible, with ferrule with plastic sleeve min.0.14 mm²

2 conductors with same cross section, solid min.0.14 mm²

2 conductors with same cross section, stranded max.1.5 mm²

Operating temperature-60 °C ... 105 °C (max. shor...

NoteNote: Product releases, conn...

Connection methodScrew connection

Max. AWG conductor cross section, flexible18

Additional textPlease follow the special in...

ECLASS 10.0.127440302

ECLASS 5.127143400

ECLASS 9.027440302

UNSPSC 20.039121522

Max. cable diameter8.4 mm

Altitude≤ 5000 m (For restrictions, ...

Insertion/withdrawal cycles> 200

Pin assignment2, 3, 7, 9

ETIM 3.0EC001132

UNSPSC 7.090139121402

Conductor cross section solid min.0.14 mm²

Stripping length5 mm

ECLASS 4.027140800

ETIM 4.0EC001132

UNSPSC 1139121402

UNSPSC 18.039121522

Width16.6 mm

Nominal voltage UN5 V

Bus systemCAN, CANopen, SafetyBus-P

Housing materialABS, metal-plated

Conductor cross section flexible max.1 mm²

China RoHSEnvironmentally Friendly Use...

Connection in acc. with standardCUL

ECLASS 6.027143400

ETIM 2.0EC001132

UNSPSC 6.0130211802

Height39.4 mm

Degree of protectionIP40

SignalCAN

Number of positions9

Conductor cross section flexible min.0.14 mm²

UNSPSC 13.239121522

Min. AWG conductor cross section, flexible26

Conductor cross section AWG max.16

Termination resistor120 Ω (Can be connected exte...

ECLASS 4.127140800

ECLASS 5.027143400

ETIM 7.0EC001132

Min. cable diameter7.6 mm

Ambient temperature (operation)-20 °C ... 75 °C

Nominal current IN100 mA

ConnectionPCB connection

Conductor cross section solid max.1.5 mm²

DesignationCorrosive gas test

Free from substances that could impair the application of coatingaccording to P-VW 3.10.7 57 ...

UNSPSC 19.039121522

Conductor cross section AWG min.26

IdentificationISA-S71.04-1985 G3 Harsh Gro...

ECLASS 11.027440302

Utilization restrictionUse in potentially explosive...

Length58 mm

Ambient temperature (storage/transport)-25 °C ... 80 °C

SUBCON fixing screws4-40 UNC

Tightening torque0.4 Nm

MTTF6706 Years (SN 29500 standar...

ECLASS 7.027440302

ETIM 6.0EC001132

UNSPSC 12.0139121402

UNSPSC 21.039121522

Color-

Flammability rating according to UL 94-

Rated surge voltage-

Back of the hand protection-

Potentials-

Degree of pollution-

Result of power-frequency withstand voltage test-

Result of flexion and pull-out test-

Number of connections-

Area of application-

Finger protection-

Result of surge voltage test-

Bending test turns-

Tight fit on carrier-

Setpoint-

Short-time current-

Bending test rotation speed-

ASD level-

Shock form-

Shock test result-

Result of voltage-drop test-

Overvoltage category-

Power frequency withstand voltage setpoint-

Result of temperature-rise test-

Number of levels-

Insulating material-

Open side panel-

Result of tight fit on support-

Proof of thermal characteristics (needle flame) effective duration-

Nominal cross section-

Insulating material group-

Maximum load current-

Acceleration-

Height NS 35/15-

Shock protection test specification-

Test duration per axis-

Short circuit stability result-

Oscillation, broadband noise test result-

Shock duration-

Number of shocks per direction-

Surface flammability NFPA 130 (ASTM E 162)-

Fire protection for rail vehicles (DIN EN 45545-2) R24-

Maximum power dissipation for nominal condition-

Tensile test result-

Result of thermal test-

Test specification, shock test-

Bending test conductor cross section/weight-

Result of the test for mechanical stability of terminal points (5 x conductor connection)-

Requirement temperature-rise test-

Test frequency-

Test spectrum-

Relative insulation material temperature index (Elec., UL 746 B)-

Calorimetric heat release NFPA 130 (ASTM E 1354)-

Fire protection for rail vehicles (DIN EN 45545-2) R23-

Height NS 35/7,5-

Screw thread-

Conductor cross section short circuit testing-

Test specification, oscillation, broadband noise-

Static insulating material application in cold-

Fire protection for rail vehicles (DIN EN 45545-2) R26-

Tightening torque max-

Conductor cross section flexible, with ferrule without plastic sleeve min.-

Conductor cross section flexible, with ferrule without plastic sleeve max.-

2 conductors with same cross section, stranded min.-

Ambient temperature (actuation)-

Test directions-

Specific optical density of smoke NFPA 130 (ASTM E 662)-

Fire protection for rail vehicles (DIN EN 45545-2) R22-

Tightening torque, min-

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum-

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum-

Permissible humidity (storage/transport)-

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))-

Smoke gas toxicity NFPA 130 (SMP 800C)-

End cover width-

2 conductors with same cross section, solid max.-

Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum-

Ambient temperature (assembly)-

Conductor cross section flexible, with ferrule with plastic sleeve max.-

Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum-

Internal cylindrical gage-

Conductor cross section flexible, with ferrule with plastic sleeve min.-

2 conductors with same cross section, solid min.-

2 conductors with same cross section, stranded max.-

Operating temperature-

Note-