1085255 Phoenix Contact Data & Networking Devices

Width-

Degree of protection-

Air pressure (operation)-

Note on the connection method-

Additional functions-

Residual ripple-

Mounting type-

Conductor cross section flexible min.-

Electromagnetic compatibility-

Interference emission-

Noise immunity-

Shock (operation)-

ECLASS 9.0-

Note on dimensions-

Permissible humidity (storage/transport)-

Basic functions-

Status and diagnostic indicators-

Cascading depth-

Housing material-

Connection method-

Conductor cross section AWG max.-

Conducted noise emission-

Immunity to ESD-

Noise emission-

ECLASS 10.0.1-

Height-

Ambient temperature (operation)-

Air pressure (storage/transport)-

Interface-

Signal LEDs-

Supply voltage-

Type AX-

Conductor cross section solid min.-

Conductor cross section solid max.-

Stripping length-

Immunity to EF-

Vibration (storage/transport)-

Utilization restriction-

Depth-

Permissible humidity (operation)-

Transmission physics-

No. of ports-

MAC address table-

PROFINET conformance class-

Supply voltage range-

Typical current consumption-

MTTF-

Conductor cross section flexible max.-

Immunity to burst-

Immunity to conducted interference-

ECLASS 11.0-

Ambient temperature (storage/transport)-

Transmission length-

Transmission speed-

Maximum conductor length (twisted pair)-

Max. current consumption-

Net weight-

Conductor cross section AWG min.-

Immunity to surge-

Type of test-

Vibration (operation)-

Width-

Ambient temperature (storage/transport)-

Note on dimensions-

Air pressure (operation)-

Interface-

MAC address table-

Maximum conductor length (twisted pair)-

MTTF-

Conductor cross section solid max.-

Electromagnetic compatibility-

Immunity to ESD-

Noise immunity-

ECLASS 11.0-

Depth-

Permissible humidity (operation)-

Air pressure (storage/transport)-

Basic functions-

Status and diagnostic indicators-

PROFINET conformance class-

Mounting type-

Conductor cross section flexible min.-

Stripping length-

Interference emission-

Vibration (operation)-

Utilization restriction-

Degree of protection-

Permissible humidity (storage/transport)-

No. of ports-

Transmission physics-

Transmission length-

Supply voltage-

Supply voltage range-

Connection method-

Conductor cross section AWG max.-

Conducted noise emission-

Noise emission-

Height-

Ambient temperature (operation)-

Transmission speed-

Signal LEDs-

Cascading depth-

Max. current consumption-

Net weight-

Housing material-

Conductor cross section AWG min.-

Immunity to surge-

Immunity to conducted interference-

Note on the connection method-

Additional functions-

Residual ripple-

Typical current consumption-

Type AX-

Conductor cross section flexible max.-

ECLASS 9.0-

Immunity to EF-

Immunity to burst-

Shock (operation)-

Type of test-

ECLASS 10.0.1-

Conductor cross section solid min.-

Vibration (storage/transport)-

Height130 mm

Width90 mm

Depth125 mm

Height with alternative assembly130 mm

Depth with alternative assembly93 mm

Degree of protectionIP20

Connection in seriesyes

Feedback voltage resistancemax. 25 V DC

Output power240 W

Typical response time< 1 s

Maximum power dissipation in no-load condition6 W

MTBF (IEC 61709, SN 29500)> 1000000 h (25 °C)

Insulation voltage input/output4 kV AC (type test)

Insulation voltage input / PE3.5 kV AC (type test)

Assembly instructionsalignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom

Connection methodScrew connection

Conductor cross section solid max.6 mm²

Conductor cross section flexible max.4 mm²

Conductor cross section AWG min.18

EMC requirements for noise immunityEN 61000-6-1

EMC requirements for noise emissionEN 61000-6-3

Standard - Electrical safetyIEC 60950-1/VDE 0805 (SELV)

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipmentEN 50178

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Standard - Approval for medical useIEC 60601-1, 2 x MOOP

UL approvalsUL Listed UL 508

CSACAN/CSA-C22.2 No. 60950-1-07

Electrostatic dischargeEN 61000-4-2

Electromagnetic HF fieldEN 61000-4-3

Frequency range0.15 MHz ... 80 MHz

Test field strength10 V/m (Test Level 3)

Output1 kV (Test Level 2 - symmetrical)

Signal1 kV (Test Level 2 - asymmetrical)

Surge voltage load (surge)EN 61000-4-5

I/O/Sasymmetrical

Criterion ANormal operating behavior within the specified limits.

China RoHSEnvironmentally Friendly Use Period = 25;

ECLASS 11.027040701

ECLASS 5.027242200

ECLASS 5.127242200

ECLASS 7.027049002

ETIM 3.0EC001039

ETIM 6.0EC002540

ETIM 7.0EC002540

UNSPSC 6.0130211502

UNSPSC 13.239121004

Width with alternative assembly122 mm

Installation distance right/left5 mm / 5 mm

Installation distance top/bottom50 mm / 50 mm

Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)

Ambient temperature (storage/transport)-40 °C ... 85 °C

Max. permissible relative humidity (operation)95 % (at 25 °C, non-condensing)

Ambient temperature (start-up type tested)-40 °C

Degree of pollution2

Climatic class3K3 (in acc. with EN 60721)

Installation height6000 m

Input voltage range85 V AC ... 264 V AC

Nominal input voltage range100 V AC ... 240 V AC

Dielectric strength maximum300 V AC

Frequency range DC0 Hz

AC frequency range45 Hz ... 65 Hz

Discharge current to PE< 3.5 mA

Nominal power consumption311 VA

Current consumption2.4 A (120 V AC)

Inrush current< 20 A (typical)

Input fuse12 A (slow-blow, internal)

Recommended breaker for input protection10 A ... 16 A (AC: Characteristics B, C, D, K)

Mains buffering timetyp. 40 ms (120 V AC)

Type of protectionTransient surge protection

Protective circuit/componentVaristor

Nominal output voltage12 V DC ±1 %

Setting range of the output voltage (USet)5 V DC ... 18 V DC (> 12 V DC, constant capacity restricted)

Nominal output current (IN)20 A (-25 °C ... 60 °C)

POWER BOOST (IBoost)26 A (-25°C ... 40°C permanent )

Selective Fuse Breaking (ISFB)120 A (12 ms)

Connection in parallelYes, for redundancy and increased capacity

Derating60 °C ... 70 °C (2.5%/K)

Protection against overvoltage at the output (OVP)< 25 V DC

Control deviation< 1 % (change in load, static 10 % ... 90 %)

Residual ripple< 50 mVPP (with nominal values)

Power loss nominal load max.29 W

Net weight1.5 kg

Efficiency> 90 % (for 230 V AC and nominal values)

Insulation voltage output / PE500 V DC (routine test)

Protection classI

Mounting positionhorizontal DIN rail NS 35, EN 60715

Conductor cross section solid min.0.2 mm²

Conductor cross section flexible min.0.2 mm²

Conductor cross section AWG max.10

Stripping length7 mm

Screw threadM3

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

Standard – Safety extra-low voltageIEC 60950-1 (SELV) and EN 60204-1 (PELV)

Standard - Safe isolationDIN VDE 0100-410

Standard - Equipment safetyGS (tested safety)

Rail applicationsEN 50121-4

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU

Low Voltage DirectiveConformance with Low Voltage Directive 2014/35/EC

Contact discharge8 kV (Test Level 4)

Discharge in air15 kV (Test Level 4)

CommentsCriterion A

Fast transients (burst)EN 61000-4-4

Input2 kV (Test Level 3 - symmetrical)

Conducted interferenceEN 61000-4-6

Voltage10 V (Test Level 3)

Criterion BTemporary impairment to operational behavior that is corrected by the device itself.

REACh SVHCLead 7439-92-1

ECLASS 10.0.127040701

ECLASS 4.027040700

ECLASS 4.127040700

ECLASS 6.027049000

ETIM 2.0EC001039

ECLASS 9.027040701

ETIM 4.0EC002540

UNSPSC 7.090139121004

UNSPSC 1139121004

UNSPSC 12.0139121004

UNSPSC 20.039121004

UNSPSC 21.039121004

UNSPSC 18.039121004

UNSPSC 19.039121004

Width40 mm

Degree of protectionIP30

Air pressure (operation)79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)

Note on the connection methodAuto negotiation and autocrossing

Additional functionsAutonegotiation

Residual ripple3.6 VPP (within the permitted voltage range)

Mounting typeDIN rail

Conductor cross section flexible min.0.2 mm²

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU

Interference emissionEN 61000-6-2 EN 61000-4-8 (electromagnetic fields) Criterion A

Noise immunityEN 61000-6-2:2005

Shock (operation)30g (EN 60068-2-27)

ECLASS 9.019170106

Note on dimensions150 mm with connector

Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

Basic functionsUnmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode

Status and diagnostic indicatorsLEDs: US, link and activity per port

Cascading depthNetwork, linear, and star structure: any

Housing materialPolycarbonate

Connection methodPush-in spring connection

Conductor cross section AWG max.12

Conducted noise emissionEN 61000-6-2 Class A

Immunity to ESDEN 61000-6-2 EN 61000-4-2 (ESD) Criterion B

Noise emissionEN 61000-6-4:2007 + A1:2011

ECLASS 10.0.119170402

Height140.4 mm

Ambient temperature (operation)-10 °C ... 60 °C

Air pressure (storage/transport)79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)

InterfaceEthernet (RJ45)

Signal LEDsData receive, link status

Supply voltage24 V

Type AXStand-alone

Conductor cross section solid min.0.2 mm²

Conductor cross section solid max.2.5 mm²

Stripping length10 mm

Immunity to EFEN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A

Vibration (storage/transport)5g, 150 Hz, in acc. with IEC 60068-2-6

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area

Depth92 mm

Permissible humidity (operation)5 % ... 95 % (non-condensing)

Transmission physicsEthernet in RJ45 twisted pair

No. of ports16 (RJ45 ports)

MAC address table8k

PROFINET conformance classConformance-Class A

Supply voltage range9 V DC ... 32 V DC

Typical current consumption68 mA

MTTF63.7 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)

Conductor cross section flexible max.2.5 mm²

Immunity to burstEN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A

Immunity to conducted interferenceEN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A

ECLASS 11.019170402

Ambient temperature (storage/transport)-40 °C ... 85 °C

Transmission length100 m (per segment)

Transmission speed10/100 Mbps

Maximum conductor length (twisted pair)100 m

Max. current consumption266 mA

Net weight266 g

Conductor cross section AWG min.24

Immunity to surgeEN 61000-6-2 EN 61000-4-5 (surge) Criterion B

Type of testFree fall in accordance with EN 61131-2

Vibration (operation)in acc. with IEC 60068-2-6: 5g, 150 Hz

Width-

Ambient temperature (storage/transport)-

Note on dimensions-

Air pressure (operation)-

Interface-

MAC address table-

Maximum conductor length (twisted pair)-

MTTF-

Conductor cross section solid max.-

Electromagnetic compatibility-

Immunity to ESD-

Noise immunity-

ECLASS 11.0-

Depth-

Permissible humidity (operation)-

Air pressure (storage/transport)-

Basic functions-

Status and diagnostic indicators-

PROFINET conformance class-

Mounting type-

Conductor cross section flexible min.-

Stripping length-

Interference emission-

Vibration (operation)-

Utilization restriction-

Degree of protection-

Permissible humidity (storage/transport)-

No. of ports-

Transmission physics-

Transmission length-

Supply voltage-

Supply voltage range-

Connection method-

Conductor cross section AWG max.-

Conducted noise emission-

Noise emission-

Height-

Ambient temperature (operation)-

Transmission speed-

Signal LEDs-

Cascading depth-

Max. current consumption-

Net weight-

Housing material-

Conductor cross section AWG min.-

Immunity to surge-

Immunity to conducted interference-

Note on the connection method-

Additional functions-

Residual ripple-

Typical current consumption-

Type AX-

Conductor cross section flexible max.-

ECLASS 9.0-

Immunity to EF-

Immunity to burst-

Shock (operation)-

Type of test-

ECLASS 10.0.1-

Conductor cross section solid min.-

Vibration (storage/transport)-

Height-

Width-

Depth-

Height with alternative assembly-

Depth with alternative assembly-

Degree of protection-

Connection in series-

Feedback voltage resistance-

Output power-

Typical response time-

Maximum power dissipation in no-load condition-

MTBF (IEC 61709, SN 29500)-

Insulation voltage input/output-

Insulation voltage input / PE-

Assembly instructions-

Connection method-

Conductor cross section solid max.-

Conductor cross section flexible max.-

Conductor cross section AWG min.-

EMC requirements for noise immunity-

EMC requirements for noise emission-

Standard - Electrical safety-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Standard – Limitation of mains harmonic currents-

Standard - Approval for medical use-

UL approvals-

CSA-

Electrostatic discharge-

Electromagnetic HF field-

Frequency range-

Test field strength-

Output-

Signal-

Surge voltage load (surge)-

I/O/S-

Criterion A-

China RoHS-

ECLASS 11.0-

ECLASS 5.0-

ECLASS 5.1-

ECLASS 7.0-

ETIM 3.0-

ETIM 6.0-

ETIM 7.0-

UNSPSC 6.01-

UNSPSC 13.2-

Width with alternative assembly-

Installation distance right/left-

Installation distance top/bottom-

Ambient temperature (operation)-

Ambient temperature (storage/transport)-

Max. permissible relative humidity (operation)-

Ambient temperature (start-up type tested)-

Degree of pollution-

Climatic class-

Installation height-

Input voltage range-

Nominal input voltage range-

Dielectric strength maximum-

Frequency range DC-

AC frequency range-

Discharge current to PE-

Nominal power consumption-

Current consumption-

Inrush current-

Input fuse-

Recommended breaker for input protection-

Mains buffering time-

Type of protection-

Protective circuit/component-

Nominal output voltage-

Setting range of the output voltage (USet)-

Nominal output current (IN)-

POWER BOOST (IBoost)-

Selective Fuse Breaking (ISFB)-

Connection in parallel-

Derating-

Protection against overvoltage at the output (OVP)-

Control deviation-

Residual ripple-

Power loss nominal load max.-

Net weight-

Efficiency-

Insulation voltage output / PE-

Protection class-

Mounting position-

Conductor cross section solid min.-

Conductor cross section flexible min.-

Conductor cross section AWG max.-

Stripping length-

Screw thread-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

Standard – Safety extra-low voltage-

Standard - Safe isolation-

Standard - Equipment safety-

Rail applications-

Electromagnetic compatibility-

Low Voltage Directive-

Contact discharge-

Discharge in air-

Comments-

Fast transients (burst)-

Input-

Conducted interference-

Voltage-

Criterion B-

REACh SVHC-

ECLASS 10.0.1-

ECLASS 4.0-

ECLASS 4.1-

ECLASS 6.0-

ETIM 2.0-

ECLASS 9.0-

ETIM 4.0-

UNSPSC 7.0901-

UNSPSC 11-

UNSPSC 12.01-

UNSPSC 20.0-

UNSPSC 21.0-

UNSPSC 18.0-

UNSPSC 19.0-

Width-

Degree of protection-

Air pressure (operation)-

Note on the connection method-

Additional functions-

Residual ripple-

Mounting type-

Conductor cross section flexible min.-

Electromagnetic compatibility-

Interference emission-

Noise immunity-

Shock (operation)-

ECLASS 9.0-

Note on dimensions-

Permissible humidity (storage/transport)-

Basic functions-

Status and diagnostic indicators-

Cascading depth-

Housing material-

Connection method-

Conductor cross section AWG max.-

Conducted noise emission-

Immunity to ESD-

Noise emission-

ECLASS 10.0.1-

Height-

Ambient temperature (operation)-

Air pressure (storage/transport)-

Interface-

Signal LEDs-

Supply voltage-

Type AX-

Conductor cross section solid min.-

Conductor cross section solid max.-

Stripping length-

Immunity to EF-

Vibration (storage/transport)-

Utilization restriction-

Depth-

Permissible humidity (operation)-

Transmission physics-

No. of ports-

MAC address table-

PROFINET conformance class-

Supply voltage range-

Typical current consumption-

MTTF-

Conductor cross section flexible max.-

Immunity to burst-

Immunity to conducted interference-

ECLASS 11.0-

Ambient temperature (storage/transport)-

Transmission length-

Transmission speed-

Maximum conductor length (twisted pair)-

Max. current consumption-

Net weight-

Conductor cross section AWG min.-

Immunity to surge-

Type of test-

Vibration (operation)-

Width22.5 mm

Ambient temperature (storage/transport)-40 °C ... 85 °C

Note on dimensions147.5 mm with connector

Air pressure (operation)79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)

InterfaceEthernet (RJ45)

MAC address table2k

Maximum conductor length (twisted pair)100 m

MTTF133.9 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)

Conductor cross section solid max.2.5 mm²

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU

Immunity to ESDEN 61000-6-2 EN 61000-4-2 (ESD) Criterion B

Noise immunityEN 61000-6-2:2005

ECLASS 11.019170402

Depth92 mm

Permissible humidity (operation)5 % ... 95 % (non-condensing)

Air pressure (storage/transport)79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)

Basic functionsUnmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode

Status and diagnostic indicatorsLEDs: US, link and activity per port

PROFINET conformance classConformance-Class A

Mounting typeDIN rail

Conductor cross section flexible min.0.2 mm²

Stripping length10 mm

Interference emissionEN 61000-6-2 EN 61000-4-8 (electromagnetic fields) Criterion A

Vibration (operation)in acc. with IEC 60068-2-6: 5g, 150 Hz

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area

Degree of protectionIP30

Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

No. of ports8 (RJ45 ports)

Transmission physicsEthernet in RJ45 twisted pair

Transmission length100 m (per segment)

Supply voltage24 V

Supply voltage range9 V DC ... 32 V DC

Connection methodPush-in spring connection

Conductor cross section AWG max.12

Conducted noise emissionEN 61000-6-2 Class A

Noise emissionEN 61000-6-4:2007 + A1:2011

Height140.4 mm

Ambient temperature (operation)-10 °C ... 60 °C

Transmission speed10/100 Mbps

Signal LEDsData receive, link status

Cascading depthNetwork, linear, and star structure: any

Max. current consumption173 mA

Net weight173 g

Housing materialPolycarbonate

Conductor cross section AWG min.24

Immunity to surgeEN 61000-6-2 EN 61000-4-5 (surge) Criterion B

Immunity to conducted interferenceEN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A

Note on the connection methodAuto negotiation and autocrossing

Additional functionsAutonegotiation

Residual ripple3.6 VPP (within the permitted voltage range)

Typical current consumption28 mA

Type AXStand-alone

Conductor cross section flexible max.2.5 mm²

ECLASS 9.019170106

Immunity to EFEN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A

Immunity to burstEN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A

Shock (operation)30g (EN 60068-2-27)

Type of testFree fall in accordance with EN 61131-2

ECLASS 10.0.119170402

Conductor cross section solid min.0.2 mm²

Vibration (storage/transport)5g, 150 Hz, in acc. with IEC 60068-2-6

Height-

Width-

Depth-

Height with alternative assembly-

Depth with alternative assembly-

Degree of protection-

Connection in series-

Feedback voltage resistance-

Output power-

Typical response time-

Maximum power dissipation in no-load condition-

MTBF (IEC 61709, SN 29500)-

Insulation voltage input/output-

Insulation voltage input / PE-

Assembly instructions-

Connection method-

Conductor cross section solid max.-

Conductor cross section flexible max.-

Conductor cross section AWG min.-

EMC requirements for noise immunity-

EMC requirements for noise emission-

Standard - Electrical safety-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Standard – Limitation of mains harmonic currents-

Standard - Approval for medical use-

UL approvals-

CSA-

Electrostatic discharge-

Electromagnetic HF field-

Frequency range-

Test field strength-

Output-

Signal-

Surge voltage load (surge)-

I/O/S-

Criterion A-

China RoHS-

ECLASS 11.0-

ECLASS 5.0-

ECLASS 5.1-

ECLASS 7.0-

ETIM 3.0-

ETIM 6.0-

ETIM 7.0-

UNSPSC 6.01-

UNSPSC 13.2-

Width with alternative assembly-

Installation distance right/left-

Installation distance top/bottom-

Ambient temperature (operation)-

Ambient temperature (storage/transport)-

Max. permissible relative humidity (operation)-

Ambient temperature (start-up type tested)-

Degree of pollution-

Climatic class-

Installation height-

Input voltage range-

Nominal input voltage range-

Dielectric strength maximum-

Frequency range DC-

AC frequency range-

Discharge current to PE-

Nominal power consumption-

Current consumption-

Inrush current-

Input fuse-

Recommended breaker for input protection-

Mains buffering time-

Type of protection-

Protective circuit/component-

Nominal output voltage-

Setting range of the output voltage (USet)-

Nominal output current (IN)-

POWER BOOST (IBoost)-

Selective Fuse Breaking (ISFB)-

Connection in parallel-

Derating-

Protection against overvoltage at the output (OVP)-

Control deviation-

Residual ripple-

Power loss nominal load max.-

Net weight-

Efficiency-

Insulation voltage output / PE-

Protection class-

Mounting position-

Conductor cross section solid min.-

Conductor cross section flexible min.-

Conductor cross section AWG max.-

Stripping length-

Screw thread-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

Standard – Safety extra-low voltage-

Standard - Safe isolation-

Standard - Equipment safety-

Rail applications-

Electromagnetic compatibility-

Low Voltage Directive-

Contact discharge-

Discharge in air-

Comments-

Fast transients (burst)-

Input-

Conducted interference-

Voltage-

Criterion B-

REACh SVHC-

ECLASS 10.0.1-

ECLASS 4.0-

ECLASS 4.1-

ECLASS 6.0-

ETIM 2.0-

ECLASS 9.0-

ETIM 4.0-

UNSPSC 7.0901-

UNSPSC 11-

UNSPSC 12.01-

UNSPSC 20.0-

UNSPSC 21.0-

UNSPSC 18.0-

UNSPSC 19.0-

Width-

Degree of protection-

Air pressure (operation)-

Note on the connection method-

Additional functions-

Residual ripple-

Mounting type-

Conductor cross section flexible min.-

Electromagnetic compatibility-

Interference emission-

Noise immunity-

Shock (operation)-

ECLASS 9.0-

Note on dimensions-

Permissible humidity (storage/transport)-

Basic functions-

Status and diagnostic indicators-

Cascading depth-

Housing material-

Connection method-

Conductor cross section AWG max.-

Conducted noise emission-

Immunity to ESD-

Noise emission-

ECLASS 10.0.1-

Height-

Ambient temperature (operation)-

Air pressure (storage/transport)-

Interface-

Signal LEDs-

Supply voltage-

Type AX-

Conductor cross section solid min.-

Conductor cross section solid max.-

Stripping length-

Immunity to EF-

Vibration (storage/transport)-

Utilization restriction-

Depth-

Permissible humidity (operation)-

Transmission physics-

No. of ports-

MAC address table-

PROFINET conformance class-

Supply voltage range-

Typical current consumption-

MTTF-

Conductor cross section flexible max.-

Immunity to burst-

Immunity to conducted interference-

ECLASS 11.0-

Ambient temperature (storage/transport)-

Transmission length-

Transmission speed-

Maximum conductor length (twisted pair)-

Max. current consumption-

Net weight-

Conductor cross section AWG min.-

Immunity to surge-

Type of test-

Vibration (operation)-

Width-

Ambient temperature (storage/transport)-

Note on dimensions-

Air pressure (operation)-

Interface-

MAC address table-

Maximum conductor length (twisted pair)-

MTTF-

Conductor cross section solid max.-

Electromagnetic compatibility-

Immunity to ESD-

Noise immunity-

ECLASS 11.0-

Depth-

Permissible humidity (operation)-

Air pressure (storage/transport)-

Basic functions-

Status and diagnostic indicators-

PROFINET conformance class-

Mounting type-

Conductor cross section flexible min.-

Stripping length-

Interference emission-

Vibration (operation)-

Utilization restriction-

Degree of protection-

Permissible humidity (storage/transport)-

No. of ports-

Transmission physics-

Transmission length-

Supply voltage-

Supply voltage range-

Connection method-

Conductor cross section AWG max.-

Conducted noise emission-

Noise emission-

Height-

Ambient temperature (operation)-

Transmission speed-

Signal LEDs-

Cascading depth-

Max. current consumption-

Net weight-

Housing material-

Conductor cross section AWG min.-

Immunity to surge-

Immunity to conducted interference-

Note on the connection method-

Additional functions-

Residual ripple-

Typical current consumption-

Type AX-

Conductor cross section flexible max.-

ECLASS 9.0-

Immunity to EF-

Immunity to burst-

Shock (operation)-

Type of test-

ECLASS 10.0.1-

Conductor cross section solid min.-

Vibration (storage/transport)-

Height130 mm

Width90 mm

Depth125 mm

Height with alternative assembly130 mm

Depth with alternative assembly93 mm

Degree of protectionIP20

Connection in seriesyes

Feedback voltage resistancemax. 25 V DC

Output power240 W

Typical response time< 1 s

Maximum power dissipation in no-load condition6 W

MTBF (IEC 61709, SN 29500)> 1000000 h (25 °C)

Insulation voltage input/output4 kV AC (type test)

Insulation voltage input / PE3.5 kV AC (type test)

Assembly instructionsalignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom

Connection methodScrew connection

Conductor cross section solid max.6 mm²

Conductor cross section flexible max.4 mm²

Conductor cross section AWG min.18

EMC requirements for noise immunityEN 61000-6-1

EMC requirements for noise emissionEN 61000-6-3

Standard - Electrical safetyIEC 60950-1/VDE 0805 (SELV)

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipmentEN 50178

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Standard - Approval for medical useIEC 60601-1, 2 x MOOP

UL approvalsUL Listed UL 508

CSACAN/CSA-C22.2 No. 60950-1-07

Electrostatic dischargeEN 61000-4-2

Electromagnetic HF fieldEN 61000-4-3

Frequency range0.15 MHz ... 80 MHz

Test field strength10 V/m (Test Level 3)

Output1 kV (Test Level 2 - symmetrical)

Signal1 kV (Test Level 2 - asymmetrical)

Surge voltage load (surge)EN 61000-4-5

I/O/Sasymmetrical

Criterion ANormal operating behavior within the specified limits.

China RoHSEnvironmentally Friendly Use Period = 25;

ECLASS 11.027040701

ECLASS 5.027242200

ECLASS 5.127242200

ECLASS 7.027049002

ETIM 3.0EC001039

ETIM 6.0EC002540

ETIM 7.0EC002540

UNSPSC 6.0130211502

UNSPSC 13.239121004

Width with alternative assembly122 mm

Installation distance right/left5 mm / 5 mm

Installation distance top/bottom50 mm / 50 mm

Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)

Ambient temperature (storage/transport)-40 °C ... 85 °C

Max. permissible relative humidity (operation)95 % (at 25 °C, non-condensing)

Ambient temperature (start-up type tested)-40 °C

Degree of pollution2

Climatic class3K3 (in acc. with EN 60721)

Installation height6000 m

Input voltage range85 V AC ... 264 V AC

Nominal input voltage range100 V AC ... 240 V AC

Dielectric strength maximum300 V AC

Frequency range DC0 Hz

AC frequency range45 Hz ... 65 Hz

Discharge current to PE< 3.5 mA

Nominal power consumption311 VA

Current consumption2.4 A (120 V AC)

Inrush current< 20 A (typical)

Input fuse12 A (slow-blow, internal)

Recommended breaker for input protection10 A ... 16 A (AC: Characteristics B, C, D, K)

Mains buffering timetyp. 40 ms (120 V AC)

Type of protectionTransient surge protection

Protective circuit/componentVaristor

Nominal output voltage12 V DC ±1 %

Setting range of the output voltage (USet)5 V DC ... 18 V DC (> 12 V DC, constant capacity restricted)

Nominal output current (IN)20 A (-25 °C ... 60 °C)

POWER BOOST (IBoost)26 A (-25°C ... 40°C permanent )

Selective Fuse Breaking (ISFB)120 A (12 ms)

Connection in parallelYes, for redundancy and increased capacity

Derating60 °C ... 70 °C (2.5%/K)

Protection against overvoltage at the output (OVP)< 25 V DC

Control deviation< 1 % (change in load, static 10 % ... 90 %)

Residual ripple< 50 mVPP (with nominal values)

Power loss nominal load max.29 W

Net weight1.5 kg

Efficiency> 90 % (for 230 V AC and nominal values)

Insulation voltage output / PE500 V DC (routine test)

Protection classI

Mounting positionhorizontal DIN rail NS 35, EN 60715

Conductor cross section solid min.0.2 mm²

Conductor cross section flexible min.0.2 mm²

Conductor cross section AWG max.10

Stripping length7 mm

Screw threadM3

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

Standard – Safety extra-low voltageIEC 60950-1 (SELV) and EN 60204-1 (PELV)

Standard - Safe isolationDIN VDE 0100-410

Standard - Equipment safetyGS (tested safety)

Rail applicationsEN 50121-4

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU

Low Voltage DirectiveConformance with Low Voltage Directive 2014/35/EC

Contact discharge8 kV (Test Level 4)

Discharge in air15 kV (Test Level 4)

CommentsCriterion A

Fast transients (burst)EN 61000-4-4

Input2 kV (Test Level 3 - symmetrical)

Conducted interferenceEN 61000-4-6

Voltage10 V (Test Level 3)

Criterion BTemporary impairment to operational behavior that is corrected by the device itself.

REACh SVHCLead 7439-92-1

ECLASS 10.0.127040701

ECLASS 4.027040700

ECLASS 4.127040700

ECLASS 6.027049000

ETIM 2.0EC001039

ECLASS 9.027040701

ETIM 4.0EC002540

UNSPSC 7.090139121004

UNSPSC 1139121004

UNSPSC 12.0139121004

UNSPSC 20.039121004

UNSPSC 21.039121004

UNSPSC 18.039121004

UNSPSC 19.039121004

Width40 mm

Degree of protectionIP30

Air pressure (operation)79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)

Note on the connection methodAuto negotiation and autocrossing

Additional functionsAutonegotiation

Residual ripple3.6 VPP (within the permitted voltage range)

Mounting typeDIN rail

Conductor cross section flexible min.0.2 mm²

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU

Interference emissionEN 61000-6-2 EN 61000-4-8 (electromagnetic fields) Criterion A

Noise immunityEN 61000-6-2:2005

Shock (operation)30g (EN 60068-2-27)

ECLASS 9.019170106

Note on dimensions150 mm with connector

Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

Basic functionsUnmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode

Status and diagnostic indicatorsLEDs: US, link and activity per port

Cascading depthNetwork, linear, and star structure: any

Housing materialPolycarbonate

Connection methodPush-in spring connection

Conductor cross section AWG max.12

Conducted noise emissionEN 61000-6-2 Class A

Immunity to ESDEN 61000-6-2 EN 61000-4-2 (ESD) Criterion B

Noise emissionEN 61000-6-4:2007 + A1:2011

ECLASS 10.0.119170402

Height140.4 mm

Ambient temperature (operation)-10 °C ... 60 °C

Air pressure (storage/transport)79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)

InterfaceEthernet (RJ45)

Signal LEDsData receive, link status

Supply voltage24 V

Type AXStand-alone

Conductor cross section solid min.0.2 mm²

Conductor cross section solid max.2.5 mm²

Stripping length10 mm

Immunity to EFEN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A

Vibration (storage/transport)5g, 150 Hz, in acc. with IEC 60068-2-6

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area

Depth92 mm

Permissible humidity (operation)5 % ... 95 % (non-condensing)

Transmission physicsEthernet in RJ45 twisted pair

No. of ports16 (RJ45 ports)

MAC address table8k

PROFINET conformance classConformance-Class A

Supply voltage range9 V DC ... 32 V DC

Typical current consumption68 mA

MTTF63.7 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)

Conductor cross section flexible max.2.5 mm²

Immunity to burstEN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A

Immunity to conducted interferenceEN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A

ECLASS 11.019170402

Ambient temperature (storage/transport)-40 °C ... 85 °C

Transmission length100 m (per segment)

Transmission speed10/100 Mbps

Maximum conductor length (twisted pair)100 m

Max. current consumption266 mA

Net weight266 g

Conductor cross section AWG min.24

Immunity to surgeEN 61000-6-2 EN 61000-4-5 (surge) Criterion B

Type of testFree fall in accordance with EN 61131-2

Vibration (operation)in acc. with IEC 60068-2-6: 5g, 150 Hz

Width-

Ambient temperature (storage/transport)-

Note on dimensions-

Air pressure (operation)-

Interface-

MAC address table-

Maximum conductor length (twisted pair)-

MTTF-

Conductor cross section solid max.-

Electromagnetic compatibility-

Immunity to ESD-

Noise immunity-

ECLASS 11.0-

Depth-

Permissible humidity (operation)-

Air pressure (storage/transport)-

Basic functions-

Status and diagnostic indicators-

PROFINET conformance class-

Mounting type-

Conductor cross section flexible min.-

Stripping length-

Interference emission-

Vibration (operation)-

Utilization restriction-

Degree of protection-

Permissible humidity (storage/transport)-

No. of ports-

Transmission physics-

Transmission length-

Supply voltage-

Supply voltage range-

Connection method-

Conductor cross section AWG max.-

Conducted noise emission-

Noise emission-

Height-

Ambient temperature (operation)-

Transmission speed-

Signal LEDs-

Cascading depth-

Max. current consumption-

Net weight-

Housing material-

Conductor cross section AWG min.-

Immunity to surge-

Immunity to conducted interference-

Note on the connection method-

Additional functions-

Residual ripple-

Typical current consumption-

Type AX-

Conductor cross section flexible max.-

ECLASS 9.0-

Immunity to EF-

Immunity to burst-

Shock (operation)-

Type of test-

ECLASS 10.0.1-

Conductor cross section solid min.-

Vibration (storage/transport)-

Height-

Width-

Depth-

Height with alternative assembly-

Depth with alternative assembly-

Degree of protection-

Connection in series-

Feedback voltage resistance-

Output power-

Typical response time-

Maximum power dissipation in no-load condition-

MTBF (IEC 61709, SN 29500)-

Insulation voltage input/output-

Insulation voltage input / PE-

Assembly instructions-

Connection method-

Conductor cross section solid max.-

Conductor cross section flexible max.-

Conductor cross section AWG min.-

EMC requirements for noise immunity-

EMC requirements for noise emission-

Standard - Electrical safety-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Standard – Limitation of mains harmonic currents-

Standard - Approval for medical use-

UL approvals-

CSA-

Electrostatic discharge-

Electromagnetic HF field-

Frequency range-

Test field strength-

Output-

Signal-

Surge voltage load (surge)-

I/O/S-

Criterion A-

China RoHS-

ECLASS 11.0-

ECLASS 5.0-

ECLASS 5.1-

ECLASS 7.0-

ETIM 3.0-

ETIM 6.0-

ETIM 7.0-

UNSPSC 6.01-

UNSPSC 13.2-

Width with alternative assembly-

Installation distance right/left-

Installation distance top/bottom-

Ambient temperature (operation)-

Ambient temperature (storage/transport)-

Max. permissible relative humidity (operation)-

Ambient temperature (start-up type tested)-

Degree of pollution-

Climatic class-

Installation height-

Input voltage range-

Nominal input voltage range-

Dielectric strength maximum-

Frequency range DC-

AC frequency range-

Discharge current to PE-

Nominal power consumption-

Current consumption-

Inrush current-

Input fuse-

Recommended breaker for input protection-

Mains buffering time-

Type of protection-

Protective circuit/component-

Nominal output voltage-

Setting range of the output voltage (USet)-

Nominal output current (IN)-

POWER BOOST (IBoost)-

Selective Fuse Breaking (ISFB)-

Connection in parallel-

Derating-

Protection against overvoltage at the output (OVP)-

Control deviation-

Residual ripple-

Power loss nominal load max.-

Net weight-

Efficiency-

Insulation voltage output / PE-

Protection class-

Mounting position-

Conductor cross section solid min.-

Conductor cross section flexible min.-

Conductor cross section AWG max.-

Stripping length-

Screw thread-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

Standard – Safety extra-low voltage-

Standard - Safe isolation-

Standard - Equipment safety-

Rail applications-

Electromagnetic compatibility-

Low Voltage Directive-

Contact discharge-

Discharge in air-

Comments-

Fast transients (burst)-

Input-

Conducted interference-

Voltage-

Criterion B-

REACh SVHC-

ECLASS 10.0.1-

ECLASS 4.0-

ECLASS 4.1-

ECLASS 6.0-

ETIM 2.0-

ECLASS 9.0-

ETIM 4.0-

UNSPSC 7.0901-

UNSPSC 11-

UNSPSC 12.01-

UNSPSC 20.0-

UNSPSC 21.0-

UNSPSC 18.0-

UNSPSC 19.0-