Powermatic Associates Logo

TBCG1XSTP-P Panasonic Industrial Automation Components

TBCG1XSTP-P on Powermatic Associates
Panasonic

Part#:TBCG1XSTP-P

Manufacturer:Panasonic

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

TBCG1XSTP-P Panasonic - TBCG1XSTP-P | Toughmate X-Strap

Product Details

  • Weight
    4.8 ounces
  • Warranty Length
    1 year

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

About the product

Compatible with TOUGHPAD FZ-G1

Similar products from: Panasonic Industrial Automation Components

AIGT8142 on Powermatic Associates

AIGT8142

Panasonic

Panasonic AIGT8142 is a connector designed for P.L.C. connection, featuring a 5-pin mini DIN connector and 4 single wires plus a shielding wire. It operates on a supply voltage of 5Vdc and uses the RS-232C communication protocol. The cable has a length of 2 meters or approximately 6.56 feet.

40 in stock
EX-13A on Powermatic Associates

EX-13A

Panasonic

Panasonic EX-13A is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor offers a degree of protection rated at IP67 and emits red light with a wavelength of 680 nm. It is capable of detecting opaque objects as small as 2mm / 0.079". The EX-13A features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. It has a rapid response time of 0.5ms / 0.0005 s and includes 1 digital output (NPN open-collector / 24Vdc / 50mA). The operating mode is Light-ON, and it has a sensing distance of 0.5m / 50cm / 500mm / 19.685". This sensor is equipped with output short-circuit protection and is described as an ultra-slim photo-electric sensor emitter+receiver pair with front sensing and built-in amplification. It comes pre-wired with a 2m 3-core (2-core on emitter side) 0.1mm2 flexible cabtyre cable terminated with bare end flying leads.

8 in stock
EX-13EA on Powermatic Associates

EX-13EA

Panasonic

Panasonic EX-13EA is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor is characterized by an IP67 degree of protection, ensuring its operation in various environmental conditions. It emits red light with a wavelength of 680 nm and can detect opaque objects as small as 2mm / 0.079". The EX-13EA features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. It has a rapid response time of 0.5ms / 0.0005 s and includes 1 digital output (NPN open-collector / 24Vdc / 50mA). The operating mode is Light-ON, and it has a sensing distance of 0.5m / 50cm / 500mm / 19.685". For protection, it includes outputs short-circuit protection. This ultra-slim photo-electric sensor emitter+receiver pair is designed for side sensing with built-in amplification. It comes pre-wired with a 2m 3-core (2-core on emitter side) 0.1mm2 flexible cabtyre cable terminated with bare end flying leads.

44 in stock
HD-T1C on Powermatic Associates

HD-T1C

Panasonic

Panasonic HD-T1C is a control unit designed specifically for wafer alignment control. It features a housing made from heat-resistant ABS material and measures 0.3m or 30cm in length. This unit is pre-wired with a 0.3m or 30cm 3-core heat-resistant PVC cable that terminates with a connector for easy integration. It offers 1 x analog output (1-5Vdc) for transmitting alignment data. The HD-T1C operates with a current consumption of 70mA or 0.07 A and boasts a rapid response time of 500µs or 0.0005 s. Its measurement accuracy is precise at 30µm, ensuring accurate wafer alignment in automation processes.

2 in stock
SC-MIL on Powermatic Associates

SC-MIL

Panasonic

Panasonic SC-MIL is a plug-in MIL connector main unit designed for connecting up to 16 input/output devices to a PLC or custom circuit board.

8 in stock
EX-13EB-C5 on Powermatic Associates

EX-13EB-C5

Panasonic

Panasonic EX-13EB-C5 is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor offers a degree of protection rated at IP67 and emits red light with a wavelength of 680 nm. It is capable of detecting opaque objects as small as 2mm / 0.079". The visual position indicator features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. With a response time of 0.5ms / 0.0005 s and a single digital output (NPN open-collector / 24Vdc / 50mA), it operates in Dark-ON mode. The sensing distance is set at 0.5m / 50cm / 500mm / 19.685in. It includes protection functions such as outputs short-circuit protection and is described as an ultra-slim photo-electric sensor emitter+receiver pair with side sensing and built-in amplification. The connection is facilitated by a pre-wired 5m 3-core (2-core on emitter side) 0.1mm2 cabtyre cable terminated with bare end flying leads.

10 in stock

Manufacturer warranty

TBCG1XSTP-P Panasonic

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare TBCG1XSTP-P with other Industrial Automation Components products

Weight

Warranty Length

Selected product

TBCG1XSTP-P
Backordered
TBCG1XSTP-P
Panasonic

TBCG1XSTP-P Panasonic - TBCG1XSTP-P | Toughmate X-Strap

Weight4.8 ounces

Warranty Length1 year

FCS-K20-AP8X
3 in stock
FCS-K20-AP8X
Turck

FCS-K20-AP8X Turck - FCS-K20-AP8X Flow Monitoring, Immersion Sensor with Integrated Processor

Weight194 grams

Warranty Length-

216-222
94 in stock
216-222
WAGO

216-222 WAGO - Ferrule; Sleeve for 0.75 mm² / 18 AWG; insulated; electro-tin plated; gray

Weight0.079 grams

Warranty Length-

About the manufacturer

Panasonic

Powermatic Associates is an authorized Panasonic distributor, proudly offering a diverse range of innovative industrial products tailored to meet your evolving needs. Panasonic, renowned for its engineering excellence and cutting-edge technology, delivers a comprehensive portfolio encompassing automation, energy solutions, and electronic components designed to enhance operational efficiency, relia...

Recently viewed products

Relevant products

EX-L211-P-C5 on Powermatic Associates

EX-L211-P-C5

Verified stock: 2

Panasonic EX-L211-P-C5 is a photo-electric sensor made from PBT for the case and glass for the lens, designed to operate within an ambient air temperature range of -10 to +55°C. It has a current consumption of 10mA / 0.01 A and offers a degree of protection rated at IP67. The sensor features a spot size of 6mm x 4mm, emits red light, and can detect objects as small as 2mm. It includes an orange LED for operation indication, a green LED for stability, and another green LED for power-on status. With a response time of 500µs / 0.0005 s, it provides 1 x digital output (PNP open-collector / 24Vdc / 50mA) and supports both Light-ON and Dark-ON operating modes. The sensing distance is specified as 1m / 100cm / 1000mm. Protection functions include outputs short-circuit protection and inverse polarity protection. This sensor is an ultra-compact laser (Class 1) with a built-in amplifier for minute object detection, offered as a 1-pair set with continuously variable sensitivity adjustment. It comes pre-wired with a 5m 4-core 0.15mm2 cabtyre cable with bare end flying leads, featuring 4 cores for the cable and 2 cores for the emitter. The wavelength of the emitted light is 655 nm.

Panasonic

FAQ

Out if stock but available for backorder.

TBCG1XSTP-P Panasonic - TBCG1XSTP-P | Toughmate X-Strap

Similar products from: Industrial Automation Components

This item can ship within 24h!

LC1D506G7 on Powermatic Associates

LC1D506G7

Verified stock: 1

Schneider Electric LC1D506G7 is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for currents of 80A (AC-1) and 50A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and offers a degree of protection of IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power (kW) spans from 15kW at 220-230Vac to 33kW at 660-690Vac, all in AC-3 category. The rated power (HP) varies from 3HP at 115Vac in single-phase to 40HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of this contactor is rated at 15 million operations at no load, and it supports a phase-to-phase rated voltage (AC) of 690 V.

Schneider Electric

This item can ship within 24h!

LC1DT20BL on Powermatic Associates

LC1DT20BL

Verified stock: 2

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features screw connections for secure installation and operates with 4 poles (4NO) capable of handling a rated current of 20A under AC-1 conditions. This contactor is designed for DIN rail mounting, ensuring a compact and efficient setup with a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 19.2-30Vdc, nominally at 24Vdc, which is 0.8 to 1.25 times the control voltage (Uc). The LC1DT20BL can handle a rated operating voltage (Ue) up to 690 V and is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both rated for instantaneous operation. The contacts are designed to withstand a rated impulse voltage (Uimp) of 6 kV. With mechanical durability rated at 15 million operations at no load, this contactor is built for longevity. It supports a phase-to-phase rated voltage (AC) of 690 V and maintains a power consumption of 2.4 W.

Schneider Electric

This item can ship within 24h!

LC1D95G7 on Powermatic Associates

LC1D95G7

Verified stock: 11

Schneider Electric LC1D95G7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power (kW) spans from 25kW at 220-230Vac to 45kW at up to 440Vac, reaching 55kW at 500Vac, and maintaining 45kW at 660-690Vac and 1000Vac, all in AC-3 category. The rated power (HP) varies from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D95G7 is rated at 4,000,000 operations, with an electrical durability (with load) of 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock