Powermatic Associates Logo

AFP7HSC4T Panasonic I/O Modules

AFP7HSC4T on Powermatic Associates
Panasonic

Part#:AFP7HSC4T

Manufacturer:Panasonic

Category:I/O Modules

Product Lifecycle:Active

Get a quick Quote!

Panasonic AFP7HSC4T is an I/O unit designed for high-speed counting applications. It features a high-speed counter unit capable of capturing count values and performing finite difference calculations on those values. The unit supports interrupt generation through comparison match, including both single comparison match and band comparison, enabling precise control and measurement tasks. It is equipped to measure frequency and the number of revolutions, providing versatility for various automation needs. The AFP7HSC4T allows for the reset of Z number and preset values, as well as the reset and preset of external signals, enhancing its functionality in complex systems. Additionally, it offers built-in clock selection for improved integration flexibility. This unit includes 4 digital inputs, configured as 4-channel high-speed counters, to accommodate multiple signal sources simultaneously.

About the manufacturer: Panasonic is one of the manufacturers that offers I/O Modules that you can order at Powermatic Associates site. Panasonic is a leading supplier of cutting-edge automation control solutions that are both advanced and cost-effective. With a significant presence in a variety of industrial sectors globally, including automotive, semiconductor, packaging, and OEMs, our product lineup features PLCs, HMI, and other offerings.

Check out the AFP7HSC4T Panasonic price in the box on the right side or send a quick quote.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

AFP7HSC4T Description

Panasonic AFP7HSC4T is an I/O unit designed for high-speed counting applications. It features a high-speed counter unit capable of capturing count values and performing finite difference calculations on those values. The unit supports interrupt generation through comparison match, including both single comparison match and band comparison, enabling precise control and measurement tasks. It is equipped to measure frequency and the number of revolutions, providing versatility for various automation needs. The AFP7HSC4T allows for the reset of Z number and preset values, as well as the reset and preset of external signals, enhancing its functionality in complex systems. Additionally, it offers built-in clock selection for improved integration flexibility. This unit includes 4 digital inputs, configured as 4-channel high-speed counters, to accommodate multiple signal sources simultaneously.

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17