8104670 Festo Pneumatic Components

Product Details

• Electrical connection 1, connection technology
  M12x1 A-coded as per EN 61076-2-101
• Seals material
  HNBR PTFE
• Electrical connection for input 1, connection pattern
  00994083
• Dimensions W x L x H
  42.2 mm x 95.3 mm x 94.3 mm
• Precision analog output in ± %FS
  1 %FS
• Input resistance
  0.3 kOhm
• Overall accuracy
  1.1 %FS
• Inlet pressure 1 MPa
  0 MPa ... 1.3 MPa
• Nominal current
  0.15 A
• Type code
  VPPI
• Symbol
  00997299
• Display type
  Color TFT
• Operating pressure
  10 bar ... 12 bar
• Max. current consumption
  525 mA
• Analog output signal range
  4 - 20 mA
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Certification
  RCM compliance mark
• Note on materials
  RoHS-compliant
• KC characters
  KC EMC
• Application note
  The product is suitable for industrial purposes only. Radio interference suppression measures may be required in residential areas.
Electrical connection 1, connection type
Plug
Climatic category
3K3 as per EN 60721
Electrical connection 1, number of pins/wires
5
Linearity
0.9 %FS
Sound power level at a distance of 1 m
51.9 dB(A)
Sealing principle
Soft
Electrical connection 1, function
Actual value output Power supply
Display size
1.77"
Max. cable length
30 m
Max. load resistance of current output
500 Ohm
Storage temperature
-20 °C ... 70 °C
Burst pressure
40 bar
Pressure regulation range MPa
0 MPa ... 1 MPa
Actuation type
Electrical
Short-circuit protection
For all electrical connections
Type of control
Direct
DC operating voltage range
20.4 V ... 27.6 V
Nominal width pressurization
5 mm
Setpoint input
4 - 20 mA
Display resolution
128x160 pixels
Max. tightening torque of pneumatic fitting
8.5 Nm
Electrical connection 1, tightening torque
1.5 Nm
Reproducibility
0.4 %FS
Standard nominal flow rate 2-3
750 l/min
Mounting position
Any
Design
Poppet valve with return spring
Standard nominal flow rate
1400 l/min
Nominal operating voltage DC
24 V
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
Pneumatic connection 1
G1/8
Housing material
PA-reinforced
Flow direction
Non-reversible
Nominal altitude of use above sea level
< 3000 m NHN
Total leakage
5 l/h
Hysteresis
0.4 %FS
Sound power level
62.5 dB(A)
Exhaust nominal width
5 mm
Safety instructions
Safety position VPPI, normally closed
Reset method
Mechanical spring
Valve function
3-way proportional pressure control valve
Inlet pressure 1
0 bar ... 13 bar
Information on operating and pilot media
Operation with oil lubrication not possible
Product weight
370 g
Pneumatic connection 2
G1/8
Reverse polarity protection
for all electrical connections
Pressure regulation range
0 bar ... 10 bar
Max. electrical power consumption
14.5 W
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Temperature coefficient
0.02 %/K
Type of mounting
With through-hole for M4 screw With H-rail
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Degree of protection
IP65
Temperature of medium
0 °C ... 50 °C
Pneumatic connection 3
G1/8

8104670 Related Documents