8087820 Festo Pneumatic Components

Product Details

• Parameterization interface
  IO-Link® User interface
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Logic interface, number of poles/wires
  8
• IO-Link®, SIO mode support
  Yes
• IO-Link®, port class
  A
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, data memory required
  500 byte
• Torsional backlash
  0.2 deg
• Product weight
  1472 g
• Rotor position sensor
  Absolute encoder, single-turn
• Peak torque
  2.7 Nm
• Ambient temperature
  0 °C ... 50 °C
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• KC characters
  KC EMC
• Display
  LED
• Input switching logic
  PNP (positive switching)
• Switching logic at outputs
  PNP (positive switching)
• Position sensing
  Motor encoder
Number of digital logic outputs 24 V DC
2
Power supply, number of pins/wires
4
IO-Link®, number of ports
1
IO-Link®, process data width OUT
2 Byte
IO-Link®, Connection technology
Plug
Type of mounting
With internal thread
Max. radial force
450 N
Step angle with full step
1.8 deg
Insulation protection class
B
Certification
RCM compliance mark
Characteristics of logic input
Configurable Not galvanically isolated
Homing
Fixed stop block positive Fixed stop block, negative
Ready status indication
LED
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Logic interface, connection type
Plug
Power supply, connection pattern
00995989
Storage temperature
-20 °C ... 60 °C
Protection class
III
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Type code
ERMS
Design
Electromechanical rotary actuator with integrated gearbox
Max. rotational speed
150 1/min
Duty cycle
100%
Motor nominal current
3 A
Additional functions
User interface Integrated end-position sensing
Logic input specification
Based on IEC 61131-2, type 1
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Power supply, type of connection
Plug
Number of digital logic inputs
2
Max. current of digital logic outputs
100 mA
Nominal current
3 A
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, process data width IN
2 Byte
IO-Link®, minimum cycle time
1 ms
Mounting position
Any
Gear ratio
9:1
Repetition accuracy
±0.05 °
Max. axial force
350 N
Symbol
00997295
Degree of protection
IP40
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Size
25
Permissible voltage fluctuations
+/- 15 %
Max. cable length
15 m outputs 20 m for IO-Link® operation
Logic interface, connection pattern
00992264
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
DC nominal voltage
24 V
Rotor position sensor resolution
16 bit
Max. current consumption
3000 mA
Work range of logic input
24 V
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Angular acceleration
≤ 140 rad/s²
Rotation angle
180°
Permissible mass moment of inertia
0.0065 kgm²
Step angle tolerance
±5%
Motor type
Stepper motor
Rotor position sensor measuring principle
Magnetic
Relative air humidity
0 - 85 %
Housing material
Wrought aluminum alloy, anodized
Interface code, base
E8-55
Material of flange
Wrought aluminum alloy, anodized

8087820 Related Documents