8083817 Festo Electric Actuators

Product Details

• Rotor position sensor
  Absolute encoder, single-turn
• Characteristics of logic input
  Configurable Not galvanically isolated
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Logic interface, connection type
  Plug
• Max. current of digital logic outputs
  100 mA
• Work range of logic input
  24 V
• IO-Link®, minimum cycle time
  1 ms
• Reversing backlash
  150 µm
• Switching logic at outputs
  PNP (positive switching)
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Rotor position sensor measuring principle
  Magnetic
• Power supply, connection pattern
  00995989
• Number of digital logic outputs 24 V DC
  2
• Storage temperature
  -20 °C ... 60 °C
• Nominal current
  3 A
• IO-Link®, Connection technology
  Plug
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
KC characters
KC EMC
Relative air humidity
0 - 90 %
Logic input specification
Based on IEC 61131-2, type 1
Ready status indication
LED
Logic interface, connection pattern
00992264
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Additional functions
User interface Integrated end-position sensing
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Insulation protection class
B
Permissible voltage fluctuations
+/- 15 %
Power supply, type of connection
Plug
Number of digital logic inputs
2
Max. current consumption
3000 mA
IO-Link®, process data width OUT
2 Byte
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Size
45
Design
Electrical mini-slide With integrated drive
Parameterization interface
IO-Link® User interface
Display
LED
Input switching logic
PNP (positive switching)
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Logic interface, number of poles/wires
8
Rotor position sensor resolution
16 bit
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width IN
2 Byte
IO-Link®, data memory required
500 byte
Stroke reserve
0 mm
Motor type
Stepper motor
Symbol
00997294
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Max. force Fy
1314 N
Max. torque Mz
7.05 Nm
Guide value for payload, horizontal
6 kg
Feed constant
10 mm/U
Additional moving mass per 10 mm stroke
30 g
DC nominal voltage
24 V
Power supply, number of pins/wires
4
IO-Link®, number of ports
1
IO-Link®, port class
A
Protection class
III
Working stroke
100 mm
Spindle pitch
10 mm/U
Guide
Recirculating ball bearing guide
Max. speed
0.25 m/s
Duty cycle
100%
Dynamic basic load rating, ball screw drive
3200 N
Ball screw drive statistical basic load rating
5900 N
IO-Link®, SIO mode support
Yes
Screw diameter
10 mm
Mounting position
Any
Homing
Fixed stop block positive Reference switch
Position sensing
Motor encoder For proximity sensor
Corrosion resistance class (CRC)
0 - No corrosion stress
Fixed bearing dynamic basic load rating
7413 N
Max. torque My
7.05 Nm
Max. radial force on actuator shaft
340 N
Guide value for payload, vertical
6 kg
Moving mass at 0 mm stroke
212 g
Product weight
1867 g
Guide rail material
Roller bearing steel
Slide material
Wrought aluminum alloy, anodized
Type code
EGSS
Spindle type
Ball screw drive
Max. acceleration
5 m/s²
Ambient temperature
0 °C ... 50 °C
Max. force Fz
1314 N
Linear guide statistical basic load rating
5630 N
Maintenance interval
Life-time lubrication
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Material of yoke plate
Wrought aluminum alloy, anodized
Repetition accuracy
±0.015 mm
Certification
RCM compliance mark
Linear guide dynamic basic load rating
3240 N
Max. torque Mx
8.14 Nm
Max. feed force Fx
120 N
Statistical fixed bearing load rating
3966 N
Additional weight per 10 mm stroke
63 g
Type of mounting
With internal thread With cylindrical pin
Piston rod material
High-alloy stainless steel
Spindle material
Roller bearing steel
Reference value, running performance
5000 km
Basic weight with 0 mm stroke
1238 g
Slide carriage material
Roller bearing steel
Housing material
Wrought aluminum alloy, anodized
Spindle nut material
Roller bearing steel

8083817 Related Documents