8083816 Festo Electric Actuators

Product Details

• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Logic input specification
  Based on IEC 61131-2, type 1
• Logic interface, connection pattern
  00992264
• Number of digital logic outputs 24 V DC
  2
• Power supply, number of pins/wires
  4
• Rotor position sensor resolution
  16 bit
• IO-Link®, number of ports
  1
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, data memory required
  500 byte
• Reversing backlash
  150 µm
• Type code
  EGSS
• Spindle type
  Ball screw drive
• Additional functions
  User interface Integrated end-position sensing
• Relative air humidity
  0 - 90 %
• Characteristics of logic input
  Configurable Not galvanically isolated
• Rotor position sensor measuring principle
  Magnetic
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Max. current of digital logic outputs
  100 mA
• IO-Link®, Connection technology
  Plug
• IO-Link®, protocol version
  Device V 1.1
IO-Link®, SIO mode support
Yes
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Mounting position
Any
Homing
Fixed stop block positive Reference switch
Screw diameter
10 mm
Position sensing
Motor encoder For proximity sensor
Degree of protection
IP40
Certification
RCM compliance mark
Max. torque Mz
7.05 Nm
Guide value for payload, horizontal
6 kg
Statistical fixed bearing load rating
3966 N
Basic weight with 0 mm stroke
1238 g
Type of mounting
With internal thread With cylindrical pin
Spindle nut material
Roller bearing steel
KC characters
KC EMC
Rotor position sensor
Absolute encoder, single-turn
Input switching logic
PNP (positive switching)
Logic interface, connection type
Plug
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
DC nominal voltage
24 V
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, port class
A
IO-Link®, process data width OUT
2 Byte
Working stroke
75 mm
Motor type
Stepper motor
Max. acceleration
5 m/s²
Duty cycle
100%
Ambient temperature
0 °C ... 50 °C
Max. force Fy
1314 N
Max. feed force Fx
120 N
Linear guide statistical basic load rating
5630 N
Additional weight per 10 mm stroke
63 g
Housing material
Wrought aluminum alloy, anodized
Switching logic at outputs
PNP (positive switching)
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Ready status indication
LED
Max. cable length
15 m outputs 20 m for IO-Link® operation
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Permissible voltage fluctuations
+/- 15 %
Number of digital logic inputs
2
Storage temperature
-20 °C ... 60 °C
Nominal current
3 A
IO-Link®, service data contents IN
32 bit force 32 bit speed
Protection class
III
Stroke reserve
0 mm
Guide
Recirculating ball bearing guide
Max. speed
0.25 m/s
Linear guide dynamic basic load rating
3240 N
Max. torque My
7.05 Nm
Guide value for payload, vertical
6 kg
Maintenance interval
Life-time lubrication
Additional moving mass per 10 mm stroke
30 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Piston rod material
High-alloy stainless steel
Spindle material
Roller bearing steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Insulation protection class
B
Parameterization interface
IO-Link® User interface
Display
LED
Power supply, type of connection
Plug
Power supply, connection pattern
00995989
Logic interface, number of poles/wires
8
Max. current consumption
3000 mA
Work range of logic input
24 V
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, minimum cycle time
1 ms
Size
45
Spindle pitch
10 mm/U
Design
Electrical mini-slide With integrated drive
Symbol
00997294
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Fixed bearing dynamic basic load rating
7413 N
Dynamic basic load rating, ball screw drive
3200 N
Max. torque Mx
8.14 Nm
Reference value, running performance
5000 km
Moving mass at 0 mm stroke
212 g
Guide rail material
Roller bearing steel
Slide material
Wrought aluminum alloy, anodized
Repetition accuracy
±0.015 mm
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. force Fz
1314 N
Max. radial force on actuator shaft
340 N
Ball screw drive statistical basic load rating
5900 N
Feed constant
10 mm/U
Product weight
1709 g
Slide carriage material
Roller bearing steel
Material of yoke plate
Wrought aluminum alloy, anodized

8083816 Related Documents